Fun Bike Center Parts Products

TOUR MASTER TRINITY WOMENS JACKET

Mon, 21 May 2012 03:13:17 +0000

• The 400 Denier Nylon Dobby 3/4 length shell combines with a waterproof / breathable Rainguard barrier • Waterproof zippered chest / sleeve vents and rear exit vents provide flow-through ventilation • Two-way main zipper closure with dual wind flap seals out the elements • Phoslite black reflective sleeve piping and Tour Master’s signature reflective rear triangle increase nighttime visibility • The Microfiber lined collar and cuffs are soft yet durable • Collar anchor snap eliminates flapping while the collar is open • Adjustable sleeve take-up straps at the forearm and bicep help secure protective armor • Removable, CE Approved armor at the elbow and shoulder with an articulated triple density back protector • Tour Master’s Ladies Z.O.Q. (Zip-Out Quilted) Liner features a comfortable color-matched taffeta liner • Zippered chest map pocket, hand warmer pockets, internal pouch pocket and mobile media pocket • Two zippered vertical gussets in the waist improve fit and comfort when seated in the riding position • Adjustable waist belts, with TPR pulls help to fine tune the fit

TOUR MASTER TRANSITION 3 TEXTILE JACKET

Mon, 21 May 2012 03:13:17 +0000

• 3/4 length 600 Denier Carbolex and 1680 Denier Ballistic Polyester shell incorporates reflective Phoslite material panels for increased nighttime visibility • Waterproof, breathable Rainguard barrier allows dryness without perspiration buildup • Collar anchor prevents flapping when collar is open • Waterproof zippered three-position shoulder vents, chest vents, sleeve vents, rear exit vents and Pipeline Ventilation System for flow-through ventilation • Durable two-way main zipper closure with dual wind flap seals out the elements • Wide reflective strip across back & chest, reflective sleeve piping, reflective lower takeup strap panel, Phoslite® material panels and reflective rear triangle increase nighttime visibility • Microfiber-lined collar and cuffs are soft, yet durable • Adjustable sleeve takeup straps at the forearm and bicep help to secure elbow armor and material • Removable, CE-approved armor at the elbow and shoulder with an articulated triple-density back protector

TOUR MASTER TRANSITION 2 TEXTILE JACKET

Mon, 21 May 2012 03:13:17 +0000

The 3/4 Length 600 Denier Carbolex and 600 Denier Ballistic Polyester shell incorporates reflective Phoslite material panels for strength and increased nighttime visibility • A waterproof and breathable Rainguard barrier allows dryness without perspiration buildup • Collar anchor snap eliminates flapping while collar is open • Waterproof zippered 3-position shoulder vents combine with chest vents, sleeve vents, rear exit vents and the Pipeline Ventilation System to provide flow-through ventilation • Durable 2-way main zipper closure with dual wind flap seals out the elements • Wide reflective strip across the back and chest, reflective sleeve piping, Phoslite material panels and Tour Master's signature reflective rear triangle increase nighttime visibility

TOUR MASTER SONORA TEXTILE JACKET

Mon, 21 May 2012 03:13:17 +0000

• Three quarter length, Armor-Link mesh material and 600 denier Carbolex combine with 1680 denier ballistic polyester in the impact areas • Comfortable, mandarin-style collar • The microfiber lined collar and cuffs are soft yet durable • Adjustable, elastic and snap sleeve take-up straps at the forearm and bicep help secure elbow armor and material • Removable, CE approved armor at the elbow and shoulder with an articulated triple density back protector

TOUR MASTER SABER 3 TEXTILE JACKET

Mon, 21 May 2012 03:13:17 +0000

TOUR MASTER RINCON TEXTILE JACKET

Mon, 21 May 2012 03:13:17 +0000

• Three quarter length, 320 Denier nylon/polyester blend with an oiled cotton feel • A waterproof and breathable Rainguard barrier allows dryness without perspiration buildup • Collar anchor eliminates flapping while collar is open • Vertical zippered chest map pockets with mesh backing double as vents • Chest vents combine with sleeve vents and a rear exit vent to provide flow-through ventilation • Durable main zipper closure with dual wind flap seals out the elements • Phoslite black reflective piping and Tour Master's signature reflective rear triangle for increased nighttime visibility • Comfortable, Microfiber lined collar and cuffs • Adjustable sleeve take-up straps to help secure elbow armor and material • Vertical zippered chest map pockets, zippered hand warmer pockets, four bellows pockets, four internal pockets and a dual zippered fanny pack • Removable, CE approved armor at the elbow and shoulder with a triple density back protector • Tour Master Z.O.Q. (Zip-Out Quilted) liner with warming 100g polyfill insulation

TOUR MASTER RAVEN TEXTILE JACKET

Mon, 21 May 2012 03:13:17 +0000

• Waist-cut, 320 denier polyester/nylon blend construction with an oiled cotton feel • A waterproof and breathable Rainguard barrier allows dryness without perspiration buildup • Collar anchor eliminates flapping while collar is open • Horizontal zippered chest pockets with mesh backing double as vents • Chest vents combine with sleeve vents and a rear exit vent to provide flow-through ventilation • Durable main zipper closure with dual wind flap seals out the elements • Phoslite dark colored reflective piping and Tour Master’s signature reflective rear triangle for increased nighttime visibility • Comfortable, Microfiber lined collar and cuffs • Removable, CE approved armor at the elbow and shoulder with a triple density back protector • Tour Master Z.O.Q. (Zip-Out-Quilted) removable liner with warming 100g polyfill insulation

TOUR MASTER MOTIVE WOMENS JACKET

Mon, 21 May 2012 03:13:17 +0000

• Fashionably designed, patterned and styled specifically for women • Three quarter length, 320 denier polyester/nylon blend construction with an oiled cotton feel • A waterproof and breathable Rainguard barrier allows dryness without perspiration buildup • Collar anchor eliminates flapping while collar is open • Chest vents combine with sleeve vents and a rear exit vent to provide flow-through ventilation • Durable main zipper closure with dual wind flap seals out the elements • Phoslite dark or pink colored reflective piping and Tour Master’s signature reflective rear triangle for increased nighttime visibility • Comfortable, Microfiber lined collar and cuffs • Zippered hand warmer pockets, bellows pockets, four internal pockets and a dual zippered fanny pack • Removable, CE approved armor at the elbow and shoulder with a triple density back protector • Tour Master Z.O.Q. (Zip-Out-Quilted) removable liner with warming 100g polyfill insulation

TOUR MASTER METRO TEXTILE JACKET

Mon, 21 May 2012 03:13:17 +0000

• Waist-cut, 450 denier nylon oxford weave shell with a snap-down collar • Waterproof and breathable Rainguard barrier allows dryness without perspiration buildup • Zippered shoulder, sleeve and rear exhaust vents combine with the Pipeline Ventilation System to provide flow-through ventilation • Durable main zipper closure with dual wind flap seals out the elements • Phoslite® dark color reflective piping helps increase nighttime visibility • EVA foam armor at the elbow and shoulder with an articulated Triple Density back protector • Tour Master’s removable Z.O.Q. (Zip-Out Quilted) liner features warming 100G polyfill insulation • Zippered hand warmer pockets and internal media pockets • Zippered gussets at the waist help to fine tune the fit

TOUR MASTER JETT 3 TEXTILE JACKET

Mon, 21 May 2012 03:13:17 +0000

• 600 denier Carbolex shell combines with a Rainguard waterproof and breathable barrier • The collar features a soft, microfiber relief panel • Zippered shoulder, sleeve and rear exit vents provide flow-through ventilation • 360º Phoslite reflective piping and Tour Master's signature reflective rear triangle • Adjustable sleeve take-up straps at the forearm and bicep to secure elbow armor and material • Removable, CE approved armor at the elbow and shoulders with an articulated triple density back protector • Tour Master's removable Z.O.Q. (Zip-Out Quilted) liner features warming 100gm Polyfill insulation • Zippered chest map pocket, hand warmer pockets, internal pouch pocket and mobile media pocket • Adjustable waist belts with TPR pulls help fine-tune the fit

TOUR MASTER INTAKE AIR TEXTILE JACKET

Mon, 21 May 2012 03:13:17 +0000

• Armor-Link mesh material and 600 denier Carbolex combine with 1680 denier ballistic polyester in the impact areas creating a well-ventilated garment that provides exceptional protection • Comfortable Mandarin-style collar • 360º Phoslite® reflective piping and Tour Master's signature reflective rear triangle help increase nighttime visibility • The microfiber lined collar and cuffs are soft yet durable • Adjustable elastic and snap sleeve take-up straps at the forearm and bicep help secure elbow armor and material • Removable CE approved armor at the elbow and shoulder with an articulated Triple Density back protector • Aqua-Therm two-stage waterproof and insulated liner can be configured or removed to best match comfort needs • Zippered chest map pocket, hand warmer pockets, internal pouch pocket and mobile media pocket • Adjustable waist belts with TPR pulls help fine tune the fit

TOUR MASTER FLEX SERIES 3 JACKET

Mon, 21 May 2012 03:13:17 +0000

• Converts easily from a 600 denier Carbolex Jacket to an Armor-Link mesh jacket and vice-versa • Water-resistant outer jacket incorporates waterproof zippered sleeve vents • 360º Phoslite reflective piping and Tour Master’s signature reflective rear triangle help increase nighttime visibility • Soft, durable microfiber-lined collar and cuff • Adjustable sleeve takeup straps to secure elbow armor and material • Removable, CE approved armor at the elbows and shoulders with an articulated triple density back protector • Tour Master’s Z.O.Q. (Zip-Out Quilted) Liner features warming 100gm polyfill insulation • Zippered hand pockets, internal pouch pocket and mobile media pocket • Adjustable waist belts with TPR pulls help to fine tune the fit • Includes a jacket/pant zipper attachment with the pant side included

TOUR MASTER EPIC JACKET

Mon, 21 May 2012 03:13:17 +0000

• The Three Quarter Length 600 Denier Carbolex Plus and 600 Denier Ballistic Polyester shell incorporates reflective Phoslite material panels for strength and increased nighttime visibility • Features an Aqua-Barrier under-the-helmet hood to eliminate seepage in the collar area; The hood easily stows in a hidden collar pocket • A waterproof and breathable Rainguard barrier allows rain protection without perspiration buildup • Collar anchor snap eliminates flapping while collar is open • Integrated kidney and back support belt easily deploys or stows from a hidden sleeve • Waterproof zippered 3-position shoulder vents combine with chest vents, sleeve vents, rear exit vents and the Pipeline Ventilation System to provide maximum flow-through ventilation • Durable two-way main zipper closure, with dual wind flap, seals out the elements

SKID LID THUG SKULL HELMET

Mon, 21 May 2012 03:13:17 +0000

Most rambling riders already have a thick skull to a certain degree, but Johnny Law insists it's not thick enough. Classically free, the SKID LID original motorcycle helmet adds DOT approved thickness to protect your head from the ground and your wallet from the system. The Skid Lid helmet is conforming in its fit but this dome shaped motorcycle helmet encourages individuality with its selection of tight graphics.

SKID LID RED FLAME HELMET

Mon, 21 May 2012 03:13:17 +0000

SKID LID REAL FLAMES HELMET

Mon, 21 May 2012 03:13:17 +0000

SKID LID RAZOR HELMET

Mon, 21 May 2012 03:13:17 +0000

SKID LID POW-MIA HELMET

Mon, 21 May 2012 03:13:17 +0000

SKID LID HELL ON WHEELS HELMET

Mon, 21 May 2012 03:13:17 +0000

SKID LID FLAT BLACK STREET ROD HELMET

Mon, 21 May 2012 03:13:17 +0000

SKID LID BOMBER HELMET

Mon, 21 May 2012 03:13:17 +0000

SKID LID BLUE FLAMES HELMET

Mon, 21 May 2012 03:13:17 +0000

SKID LID BLACK STREET ROD HELMET

Mon, 21 May 2012 03:13:17 +0000

SKID LID BIKER SKULL HELMET

Mon, 21 May 2012 03:13:17 +0000

SKID LID BAD TO THE BONE HELMET

Mon, 21 May 2012 03:13:17 +0000

SKID LID TRADITIONAL CHROME HELMET

Mon, 21 May 2012 03:13:17 +0000

The Traditional Helmet from Skid Lid features a newly redesigned shape with a slimmer profile and improved fit
"Skid Lid Original" with added visor
Thermoplastic alloy injected shell
Retention straps with D-rings
Ear straps covered for comfort
Meets or exceeds D.O.T. standards

SKID LID TRADITIONAL SOLID HELMET

Mon, 21 May 2012 03:13:17 +0000

The Traditional Helmet from Skid Lid features a newly redesigned shape with a slimmer profile and improved fit
"Skid Lid Original" with added visor
Thermoplastic alloy injected shell
Retention straps with D-rings
Ear straps covered for comfort
Meets or exceeds D.O.T. standards

SKID LID ORIGINAL CHROME HELMET

Mon, 21 May 2012 03:13:17 +0000

SKID LID ORIGINAL SOLID HELMET

Mon, 21 May 2012 03:13:17 +0000

THOR QUADRANT DEFLECTOR

Mon, 21 May 2012 03:13:17 +0000

The Quadrant Deflector is the lightest under-jersey roost guard available. Weighing in at only 6 ounces, the Quadrant Deflector features a perforated, molded bio-foam chest that’s form fitted onto the Ride-Lite moisture-wicking chassis for maximum airflow. Get the roost protection you need without sacrificing weight, mobility and cooling.

THOR IMPACT RIG SE

Mon, 21 May 2012 03:13:17 +0000

The ultimate under-protector has arrived. Designed to offer maximum coverage yet hug your body, the Impact Rig SE concept is based on a form fitting micro-mesh chassis with integrated soft and hard protective panels that move with your body. Maximum airflow is achieved by utilizing venting on all 3 construction materials - the plastic, bio-foam, and chassis, are all vented. Removable kidney belt and permanently affixed elbow/forearm guards. Of course all that protection and venting is wasted if it’s not comfortable, so we paid close attention and utilized external seams on the chassis, elastic cuff stitching, and a lightly padded neck roll for maximum comfort. This unit offers the most coverage available in an under-protector.

THOR FORCE PROTECTOR

Mon, 21 May 2012 03:13:17 +0000

Engineered to meet the demands of professional riders. Providing serious roost protection and coverage with style, the new and completely redesigned Force protector offers extensive coverage without restricting movement. Utilizing fully articulating front and back panels that naturally adjusts to fit the contours of your torso; we’ve created the most comfortable roost guard we’ve ever produced. These fully hinged panels go way beyond what our competitors offer with their solid, or partially jointed panels. Of course the innovation doesn’t stop there... check out the removable shoulder caps that provide clearance for neck brace compatibility, the integrated ventilation system with oversized intake port on the chest panel lets air in, but keeps roost out, and the ratchet style closure system allows for precise fitment. Quite simply, the Force Protector continues to set the standard for others to follow.

THOR SENTINEL PRO PROTECTOR

Mon, 21 May 2012 03:13:17 +0000

The new Sentinel Pro is designed for riders that want the lightest, best fitting roost guard in a front-only configuration. Complete neck brace compatibility without sacrificing serious roost protection. Imported Features:

Slim profile & thin back strap allow for neck brace compatibility
Injection molded chest panel with molded bio
foam interior
Ratchet buckle closure system
Lightweight, comfortable design perfect for all riding conditions

THOR SENTINEL RIPPLE PROTECTOR

Mon, 21 May 2012 03:13:17 +0000

The Sentinel is the most versatile, best fitting, lightest roost protector we’ve ever built. Weighing in at only 1.4 lbs., the Sentinel incorporates numerous vents and air channels for maximum ventilation. Designed for riders who are looking for roost coverage without the bulk and excess weight, the Sentinel is pure performance. We’ve included both the back strap and number plate with every Sentinel, so you’re ready to go racing right out of the box. Fits most riders 120-200 lbs.

THOR SENTINEL WRAP PROTECTOR

Mon, 21 May 2012 03:13:17 +0000

THOR SENTINEL LIVEWIRE PROTECTOR

Mon, 21 May 2012 03:13:17 +0000

THOR SENTINEL ZEBRATEC PROTECTOR

Mon, 21 May 2012 03:13:17 +0000

THOR SENTINEL ILLUSION PROTECTOR

Mon, 21 May 2012 03:13:17 +0000

Introducing the next generation in roost protection. The Sentinel is the most versatile, best fitting, lightest roost protector Thor has ever built. Weighing in at only 1.4 lbs., the Sentinel incorporates numerous vents and air channels for maximum ventilation. Designed for riders that are looking for coverage without the bulk and excess weight, the Sentinel is pure performance.

THOR SENTINEL PROTECTOR

Mon, 21 May 2012 03:13:17 +0000

THOR QUADRANT PROTECTOR

Mon, 21 May 2012 03:13:17 +0000

The Quadrant is one serious roost guard. Developed to provide maximum coverage with minimal restriction, the Quadrant features improved chest and back panels that contour the body in the riding position. The ergonomic design incorporates our legendary boxed-rib design that provides both rigidity and natural air channels. This unique approach maximizes airflow without sacrificing strength.

THOR QUADRANT PRO CIRCUIT HELMET

Mon, 21 May 2012 03:13:17 +0000

Thor and Pro Circuit have a legendary history together and now you can run the Quadrant Pro Circuit helmet that features the same graphic scheme as the team helmet. Join the Monster Army and run the officially licensed team graphic. Weighs in at a mere 2.8 lbs.

THOR QUADRANT ROCKSTAR HELMET

Mon, 21 May 2012 03:13:17 +0000

Thor's new Rockstar helmet is emblazoned with the official Rockstar logos and colors that’ll get you noticed on any track
The Quadrant Rockstar helmet features a unique print that’s as aggressive as the brand it represents

THOR FORCE CARBON HELMET

Mon, 21 May 2012 03:13:17 +0000

Built specifically for riders who demand the ultimate in performance, the Force Carbon helmets exceed every expectation. Carbon Fiber material is combined with resin to form “Pre-Preg” sheets that are hand laid to form the outermost layer of the shell. Offering amazing strength with great weight savings, the Carbon Fiber shell creates an amazing look. Trust these hand crafted helmets to protect you while riding.

THOR QUADRANT MARBLE HELMET

Mon, 21 May 2012 03:13:17 +0000

Blended acrylonitrile butadiene styrene and polycarbonate shell provides maximum coverage without excess weight
Molded roost guard for added protection
Oversized forehead venting
Direct flow mouth guard with mesh filter
Dual-density expanded polystyrene liner
Plush removable/washable comfort liner
Molded rear goggle strap holder

THOR FORCE RIPPLE HELMET

Mon, 21 May 2012 03:13:17 +0000

Meets all AMA/FIM professional racing standards
Hand-laid composite Fiberglass / Dyneema / Kevlar construction for superior strength with minimal weight
Contoured eyeport gasket improves goggle fit
Increased liner and EPS ventilation for maximum airflow
Front intake port and rear exhaust vents provide optimal air circulation and venting
EPS material extends throughout chinbar for increased strength
Antibacterial, moisture-wicking SilverCool™ liner is removable/washable and keeps you cool ride after ride
Integrated hi-flow mouthpiece increases airflow while filtering out roost
Integrated roost guard for added protection
DOT and ECE 22.05 approved

THOR FORCE CUBE HELMET

Mon, 21 May 2012 03:13:17 +0000

Meets all AMA/FIM professional racing standards
Hand-laid composite Fiberglass / Dyneema / Kevlar construction for superior strength with minimal weight
Contoured eyeport gasket improves goggle fit
Increased liner and EPS ventilation for maximum airflow
Front intake port and rear exhaust vents provide optimal air circulation and venting
EPS material extends throughout chinbar for increased strength
Antibacterial, moisture-wicking SilverCool™ liner is removable/washable and keeps you cool ride after ride
Integrated hi-flow mouthpiece increases airflow while filtering out roost
Integrated roost guard for added protection
DOT and ECE 22.05 approved
3.1 LBS. (1407 GRAMS)

THOR FORCE SOLID HELMET

Mon, 21 May 2012 03:13:17 +0000

Meets and exceeds all AMA and FIM professional racing standards
Hand-laid composite Fiberglass/Dyneema/Kevlar construction for superior strength with minimal weight
Contoured eyeport gasket improves goggle fit
Increased liner and EPS ventilation for maximum airflow
Front intake port and rear exhaust vents provide optimal air circulation and venting
EPS material extends throughout chinbar for increased strength
Antibacterial, moisture wicking SilverCool™ liner is removable/washable and keeps you cool ride after ride
Integrated hi-flow mouthpiece increases airflow while filtering out roost

THOR QUADRANT MATTE BLACK HELMET

Mon, 21 May 2012 03:13:17 +0000

The Quadrant Helmet offers increased performance, reduced weight, and innovative styling. Designed to exceed both DOT and ECE 22.05 standards, the Quadrant is truly a world-class helmet loaded with features normally found only on more expensive helmets. Featuring a dual-density expanded polystyrene liner, extensive venting, molded roost guard and a plush removable liner, the Quadrant offers comfort and performance in a lightweight package that’s got just the right balance and a great, secure fit. Next time you ride, don’t settle for anything less than the category leading Quadrant Helmet.

THOR QUADRANT SPIRAL HELMET

Mon, 21 May 2012 03:13:17 +0000

THOR QUADRANT FREQUENCY HELMET

Mon, 21 May 2012 03:13:17 +0000

Blended acrylonitrile butadiene styrene and polycarbonate shell provides maximum coverage without excess weight
Molded roost guard for added protection
Oversized forehead venting
Direct flow mouth guard with mesh filter
Dual-density expanded polystyrene liner
Plush removable/washable comfort liner
Molded rear goggle strap holder
DOT and ECE 22.05

Fox Racing F3R Race Boots

Mon, 21 May 2012 03:13:17 +0000

The championship winning F3 boot has evolved into the 2010 Fox F3R. Within the proven Biomorphic Chassis™ improvements include a 12mm lower toe box for improved shift lever feel, more pliable construction geometry for enhanced interconnectivity between bike and rider and the use of the most durable materials available throughout the boot. With the new F3R you get the best fitting, most durable boot ever made. It breaks in without breaking down.

Fox Racing Instinct Boots

Mon, 21 May 2012 03:13:17 +0000

With insight from the GOAT Ricky Carmichael, Fox made one of the most comfortable and maneuverable boots on the market, not to mention the highest level of protection.

Five layer sole provides running shoe comfortability with a steel shank for suport and impact protection
Hinged ankle providing optimum lateral support
Booty-less design for less bulk and more comfort and feel
Four buckle closure system with ball and socket design for easy in and out
Rubber (replaceable) sole that keeps you stuck to the pegs at all times

Fox Racing Comp 5 Shorty Boots

Mon, 21 May 2012 03:13:17 +0000

The Comp 5 Shorty has the comfort of a skate shoe with the coverage of a full-on motocross boot built right in. High flex and feel with solid ankle armor means you'll spend more time riding and less time icing those ankle bones.

Fox Racing Comp 5 Offroad Boots

Mon, 21 May 2012 03:13:17 +0000

All the same great features of the Fox Racing Comp 5 Boots, but with the added versatility of a full-traction sole
The Comp 5 Offroad Boots from Fox are engineered for the entry level rider with a high quality look and feel
Race Bonded Out Sole, specifically molded for each size boot. This enhances durability and comfort. It also gives the boot a new modern look.
Easy to Operate Aluminum Soft-Touch pivot lock buckles.We decreased the size of the locking pin on the buckles to make the comp series easier to operate.
Anatomically contoured shin plate and medial plastic.

Fox Racing Comp 5 Boots

Mon, 21 May 2012 03:13:17 +0000

Engineered for the entry level rider with a high quality look and feel
Race Bonded Out Sole, specifically molded for each size boot, this enhances durability and comfort. It also gives the boot a new modern look
Easy to Operate Aluminum Soft-Touch pivot lock buckles.We decreased the size of the locking pin on the buckles to make the comp series easier to operate
Anatomically contoured shin plate and medial plastic
Full leather upper construction, pliable and comfortable right out of the box. The Comp series is built with all day comfort in mind

Fox Racing Comp 5 Undertow Boots

Mon, 21 May 2012 03:13:17 +0000

An excellent boot at a great value, the Fox Comp 5 Undertow Boot doesn't sell itself short with features like a race-bonded outsole and soft touch aluminum buckles. Add in the impressive line of prints and its easy to see why this is the best value in MX boot technology.

FLY RACING KINETIC MX BOOTS

Mon, 21 May 2012 03:13:17 +0000

The all-new Kinetic MX Boot is the latest in boot technology from Fly Racing. With its slim profile molded sole, top grade leather construction, "Easy-Lock" buckle system with pivoting strap receivers, and large accommodating top gaiter, this boot is the perfect blend of high tech and ultra affordability that will have you covered from trail checkpoints to checkers at the motocross track. Top-level performance comes together with high value to place the Kinetic MX Boot at the top of its class.

FLY RACING KINETIC MX VICTORY BOOTS

Mon, 21 May 2012 03:13:17 +0000

FLY RACING MAVERICK ARSENAL BOOTS

Mon, 21 May 2012 03:13:17 +0000

Just like your hands, your feet are one of the most important aspects of riding a motorcycle. When you think about how often you shift gears and work the rear brake pedal you begin to realize the importance of good riding boots. FLY riding boots combine protection, durability, and value to keep you grabbing gears for years to come.

FLY RACING MAVERICK ATV BOOTS

Mon, 21 May 2012 03:13:17 +0000

The Maverik Shorty boot features a 3-buckle design and a shorter height which is ideal for maximum comfort and performance while riding. An 11 inch overall height is 3-4 inches shorter than most boots and a double stitched ATV/Enduro Vibram sole provides ultimate traction. The Maverick Shorty boot pushes the limits of feature and function at an unbelievable price.

FLY RACING MAVERICK BOOTS

Mon, 21 May 2012 03:13:17 +0000

The Maverik pushes the limits of feature and function at an unbelievable price. A genuine leather heat shield, anti-dirt repelling top gator, molded impact resistant shin plate, full printed upper, and Fly Racing's original designed secure and easy action buckles. Stand up and be a Maverik with these boots.

3-D shin protection- Pre-shaped for comfort-molded plastic adds impact protection
Elastic gaiter- Provides a comfortable rim around your calf while sealing the opening from debris
Adjustable quick lock buckles- Secure buckles with a solid locked in feel and an open design keeps dirt from clogging the function
3-D molded shift protection - This plastic molded panel saves your boot from premature wear. Don’t miss a shift with the added grooves and texture to aid in grabbing the shift lever
Steel toe guard- Gives that finished look and protects the front of the sole from delaminating

FLY RACING MAVERICK VAPOR BOOTS

Mon, 21 May 2012 03:13:17 +0000

ALPINESTARS Scout Waterproof Boots

Mon, 21 May 2012 03:13:17 +0000

A tall muti use, all season riding boot suitable for dual sport touring bikes or sportbikes. Scout is a durable, waterproof leather boot with a stitched sole engineered for exceptional grip on slippery surfaces.

ALPINESTARS Stella Armada WP Womens Boots

Mon, 21 May 2012 03:13:17 +0000

A new and stylish women's waterproof boot, retro in design, that is as at home on the open road as it is in the city.

ALPINESTARS Durban Gore-Tex Boots

Mon, 21 May 2012 03:13:17 +0000

The Durban is a new concept boot direct from the Alpinestars Technical Fashion Design Studio. The people who created Nero have designed and developed a boot, literally from the ground - up, to accompany the rider who uses his trail/tourer for running into town on the commute and taking off for the hills over the weekend. Style and function set the Durban Gore-Tex apart as a flexible, comfortable and eminently practical solution everyday use whatever the surface and whatever the weather, with the added benefit of a 100% waterproof and breathable Gore membrane.

ALPINESTARS ST Vented Boots

Mon, 21 May 2012 03:13:17 +0000

Alpinestars' ST boot offers the rider excellent levels of comfort with perforated panels and integrated flex zones in the Achilles and instep zones. Strategically placed PU protection and dual density ankle cups encapsulate the foot in a protective cocoon, further boosting the ST's credentials as the ultimate warm weather riding boot.

ALPINESTARS Tech Touring GoreTex Boots

Mon, 21 May 2012 03:13:17 +0000

The Tech Touring Gore-Tex boot provides the rider with a CE certified all weather riding boot that is robust, waterproof and secure for the toughest riding conditions. Utilizing a Gore-Tex membrane it provides the perfect year round boot for the touring or commuter rider looking for a product to cover all prevailing conditions.

ALPINESTARS Net Air Boots

Mon, 21 May 2012 03:13:17 +0000

The Net Air boot is a lightweight, full length boot which uses a unique leather/mesh construction to provide excellent protection and ventilation qualities for the ultimate in comfortable summer road touring.

ALPINESTARS Stella Tech 3 Womens Boots

Mon, 21 May 2012 03:13:17 +0000

Ladies' specific version of the hugely popular Alpinestars Tech 3 Motocross boot. Benefitting from the technology developed in the high specification Tech 10 and Tech 7, the Tech 3 combines strong protection performance with comfort and high quality components to give unobtrusive riding feel and durability.

ALPINESTARS Tech 8 Light Boots

Mon, 21 May 2012 03:13:17 +0000

The latest incarnation of the Tech 8 uses premium materials and innovative design features to create a lightweight boot with unrivalled levels of safety and performance. A unique inner ankle sleeve enhances comfort and fit when riding, while integrated high modulus TPU plates protect you from whatever the trail can throw at you.

ALPINESTARS No Stop Trial Boots

Mon, 21 May 2012 03:13:17 +0000

Designed to meet the demands of world champions take one ride in Alpinestars No Stop and you'll know that this is the most advanced trials boot ever created. *The fit is like a sports shoe, with internal protection of the toe, ankle and inner leg areas for the rigors of trials riding. *A top reverse buckle closure system secures the foot and reduces the boot’s lateral dimensions. *Replaceable anatomic footbed. *Leather upper. Contoured shin plate is injected with high modulus polyurethane (PU) for a high level of impact and abrasion resistance. *PU injected rear plate. *Patented ankle brace system with shock absorbing padding on the ankles. *Abrasion resistant patch on the outside of the ball of each foot. *Three high impact resistant technopolymer buckles with memory featuring an integrated quick release/locking system and a top reverse closure.

ALPINESTARS Roam WP Boots

Mon, 21 May 2012 03:13:17 +0000

The Roam is an all-weather riding boot featuring Alpinestars' exclusive Drystar liner, ensuring your feet stay dry and warm in the foulest conditions. A combination of upper and lateral Velcro straps and internal heel support ensure freedom of movement when riding, while providing support and protection where it's needed.

ALPINESTARS Alpha Touring WP Boots

Mon, 21 May 2012 03:13:17 +0000

The Alpha Touring WP boot provides the rider with CE certified protection and all weather comfort. Natural feel and high levels of movement are achieved through accordion flex zones to improve pedal control. With a 100% waterproof internal membrane and elegant outer styling, this mid-cut boot is built for all day use in all weather conditions.

ALPINESTARS Web GoreTex Boots

Mon, 21 May 2012 03:13:17 +0000

Alpinestars' Web Gore-Tex is a high quality waterproof and breathable boot that can be worn every day of the year. *Full-length zipper closure system for easy entry and exit. *Plastic moulded shin plate covered by a pressure stamped section of leather. *Internal support is provided by injection-molded plastic on the ankles. *Internal heel counter. *Internal toe counter is layered under the leather. *Alpinestars' exclusive vulcanized compound sole with unique side wrapping design. *Water-resistant full-grain oil leather upper. *Injected PU shifter area. *Waterproof and breathable Gore-Tex lining.

ALPINESTARS Hydro Sport Drystar Boots

Mon, 21 May 2012 03:13:17 +0000

Alpinestars' Hydro Sport boot is designed for the sport oriented rider who demands a boot that performs in all weather conditions. Advanced protection features, a waterproof and breathable Drystar liner and integrated ventilation combine to create a boot that adapts to any riding environment.

ALPINESTARS S-MX Plus GoreTex Boots

Mon, 21 May 2012 03:13:17 +0000

For superior safety and freedom of movement, Alpinestars' high performance S-MX Plus GORE-TEX Boot features an innovative Multi Link Control system and high modulus TPU protection integrated into the boot’s sleek chassis. A waterproof and breathable GORE-TEX membrane ensures comfortable wear 365 days a year.

ALPINESTARS Stella S-MX 5 Womens Boots

Mon, 21 May 2012 03:13:17 +0000

The Stella S-MX 5 has been created for women riders as a performance road and track boot, incorporating the latest technical footwear design and material know-how. Following on from the other performance boots in the Alpinestars range, the S-MX 5 is notable for its comfort, hugging fit, safety performance and ease of adjustability.

ALPINESTARS Tech 7 Boots

Mon, 21 May 2012 03:13:17 +0000

Designed for the unforgiving world of motocross; the Tech 7 features an advanced closure system and outsole derived from Tech 10 technology. A new boot offering a great specification, performance combination and true value for money.

ALPINESTARS Tech 7 Supermoto Boots

Mon, 21 May 2012 03:13:17 +0000

Alpinestars purpose built technical boot, specifically for the hard wearing world of Supermoto. Full, replaceable, outer sole protects the boot structure from wear.

ALPINESTARS S-MX 5 Boots

Mon, 21 May 2012 03:13:17 +0000

The S-MX 5 has been created as a performance road and track boot, incorporating the latest technical footwear design and material know-how. Following on from the other performance boots in the Alpinestars range, the S-MX 5 is notable for its comfort, hugging fit, safety performance and ease of adjustability.

ALPINESTARS S-MX 5 Waterproof Boots

Mon, 21 May 2012 03:13:17 +0000

The S-MX 5 Waterproof boot has been created as a performance road and track boot, with built-in weather protection. Incorporating the latest technical footwear design and material know-how, the S-MX 5 WP is notable for its comfort, hugging fit, safety performance and wet weather performance.

ALPINESTARS Tech 3 Boots

Mon, 21 May 2012 03:13:17 +0000

Technical, high-performance motocross / off-road boot for entry-level racers. Brand new design for impressive performance, comfort and safety at an astonishing price. *Contoured shin plate protector is injected with high-modulus PU for a high level of impact and abrasion resistance. *Reinforced leather plate runs along rear of the boot. *Extended inside and outside plate guards the side and toe-box area of the boot. *Calf plate designed for maximum grip, support and side contact. *Internal plastic reinforcement on the inner side of the boot is covered by thick stamped suede for increased grip and heat resistance. *Instep flex-zone stitched for maximum support. *Action leather upper. *Alpinestars’ exclusive high grip rubber double density compound outsole with a contoured tempered steel shank over injected inside the assembly insole.

ALPINESTARS Tech 10 Boots

Mon, 21 May 2012 03:13:17 +0000

A revised ergonomic design, the revolutionary development concepts have produced the most streamlined, balanced and protective MX boot yet to hit the market. Lightweight upper combines full-grain leather with impact and abrasion resistant PU shell for unmatched levels of safety. PU guards the toes, foot, heel, ankle, calf and shin with extra hard compounds on the toe-box, heel and Achilles tendon. Innovative PU spine protects the heel, controls flex and features a hyperextension guard. Outer side of the boot features anti-torsion PU panel on the ankle for flexibility and support. Ultra comfortable and precision fit interior features new poly fabric lining with open cell foam and a shock absorbing shin pad. New and exclusive dual compound sole is seamlessly integrated to the multi-density foot base structure with built-in support. Sole provides superior durability, grip, feel and a high level of structural rigidity. Advanced closure system features 3 techno-polymer and aluminum buckles for easy adjustability with a precise, secure and streamlined fit.

ALPINESTARS S-MX 2 Boots

Mon, 21 May 2012 03:13:17 +0000

Utilizing technology from the S-MX 4 road riding boot, the S-MX 2 is a new concept low cut, performance street boot. Incorporating much of the protective technology present in its larger ‘cousin’, this boot offers great flexibility without sacrificing safety.

ALPINESTARS Supertech R Boots

Mon, 21 May 2012 03:13:17 +0000

Forged on the racetrack, the Supertech R is Alpinestars top-of-the-line road racing boot and benefits from the feedback of elite MotoGP and WSBK athletes. The latest version of the Supertech features a redesigned inner bootie constructed from 3D technical mesh that further reduces the boot’s weight while greatly enhancing breathability, comfort and feel.

ALPINESTARS S-MX Plus Boots

Mon, 21 May 2012 03:13:17 +0000

For superior safety and freedom of movement, Alpinestars' SMX Plus features an innovative Multi Link Control system and high modulus TPU protection integrated into the sleek profile of the boot. The inner Kevlar speed lacing closure and micro-adjustable ratchet fastener combine to ensure a comfortable, conforming fit on both the road and track.

CYBER US-39 Multi Helmet

Mon, 21 May 2012 03:13:17 +0000

An affordable and stylish solution to your helmet needs. Built to meet or exceed DOT standards and with features such as quick change shields, this helmet is a great value for the money.

Thermoplastic alloy injected shell
Tool-less quick change shield
Removable, washable liner
Chin and forehead intake
Side and rear exhaust venting
Meets or exceeds DOT standards

CYBER US-39 Helmet

Mon, 21 May 2012 03:13:17 +0000

An affordable and stylish solution to your helmet needs. Built to meet or exceed DOT standards and with features such as quick change shields, this helmet is a great value for the money.

Thermoplastic alloy injected shell
Tool-less quick change shield
Removable, washable liner
Chin and forehead intake
Side and rear exhaust venting
Meets or exceeds DOT standards

CYBER US-39 Reaper Helmet

Mon, 21 May 2012 03:13:17 +0000

An affordable and stylish solution to your helmet needs. Built to meet or exceed DOT standards and with features such as quick change shields, this helmet is a great value for the money.

Thermoplastic alloy injected shell
Tool-less quick change shield
Removable, washable liner
Chin and forehead intake
Side and rear exhaust venting
Meets or exceeds DOT standards

CYBER US-39 Cobra Helmet

Mon, 21 May 2012 03:13:17 +0000

An affordable and stylish solution to your helmet needs. Built to meet or exceed DOT standards and with features such as quick change shields, this helmet is a great value for the money.

Thermoplastic alloy injected shell
Tool-less quick change shield
Removable, washable liner
Chin and forehead intake
Side and rear exhaust venting
Meets or exceeds DOT standards

CYBER US-12 Amp Helmet

Mon, 21 May 2012 03:13:17 +0000

Thermoplastic alloy injected shell
Tool-less quick change shield
Removable, washable interior
Chin and forehead intake, side and rear exhaust venting
Meets or exceeds D.O.T. specifications

CYBER US-95 Helmet

Mon, 21 May 2012 03:13:17 +0000

Anti-scratch system
Easy touch release shield mechanism
Comfortable lining material, quick-snap cheek pads and lining which is easily removable and washable
Meets or exceeds Snell M2005 and D.O.T. standards

CYBER US-97 Good N Evil Helmet

Mon, 21 May 2012 03:13:17 +0000

Thermoplastic alloy injected shell
Internal sun shield
Removable, washable interior
Quick release base plate shield system
Airflow extraction system
Reflective rear vent lenses
Lethal Threat Designs
Meets or exceeds D.O.T. standards

CYBER US-97 Thug Helmet

Mon, 21 May 2012 03:13:17 +0000

Thermoplastic alloy injected shell
Internal sun shield
Removable, washable interior
Quick release base plate shield system
Airflow extraction system
Reflective rear vent lenses
Lethal Threat Designs
Meets or exceeds D.O.T. standards

CYBER US-97 Molten Jester Helmet

Mon, 21 May 2012 03:13:17 +0000

Thermoplastic alloy injected shell
Internal sun shield
Removable, washable interior
Quick release base plate shield system
Airflow extraction system
Reflective rear vent lenses
Lethal Threat Designs
Meets or exceeds D.O.T. standards

CYBER US-97 Bomb Helmet

Mon, 21 May 2012 03:13:17 +0000

Thermoplastic alloy injected shell
Internal sun shield
Removable, washable interior
Quick release base plate shield system
Airflow extraction system
Reflective rear vent lenses
Lethal Threat Designs
Meets or exceeds D.O.T. standards

CYBER U-70 Flames Helmet

Mon, 21 May 2012 03:13:17 +0000

Thermoplastic alloy injected shell
3-snap shorty visor
Lower fit
Sleek profile
Meets or exceeds D.O.T. standards

CYBER U-72 Helmet

Mon, 21 May 2012 03:13:17 +0000

Polycarbonate shell
Retractable internal sun shield
Removable/washable liner
Meets or exceeds D.O.T. standards

CYBER U-72 Eagle Helmet

Mon, 21 May 2012 03:13:18 +0000

Polycarbonate shell
Retractable internal sun shield
Removable/washable liner
Lethal Threat Designs
Meets or exceeds D.O.T. standards

CYBER U-72 Carbon Helmet

Mon, 21 May 2012 03:13:18 +0000

Polycarbonate shell
Retractable internal sun shield
Removable/washable liner
Meets or exceeds D.O.T. standards

CYBER U-6 Helmet

Mon, 21 May 2012 03:13:18 +0000

ABS shell with painted high gloss finish
Meets or exceeds D.O.T. standards
Sculpted shell design
Contoured visor
Contemporary edge trim
Thermoplastic alloy injected shell
Adjustable forehead vents

CYBER U-378 Helmet

Mon, 21 May 2012 03:13:18 +0000

The new U-378 combines high quality with low prices! So many great features on the new Cyber helmet including a retractable sun visor. Perfect for street, cruiser, or even scooter riders, the U-378 provides plenty of safety features with the comfort of a top of the line riding helmet.

CYBER UT-21 Solid Helmet

Mon, 21 May 2012 03:13:18 +0000

Aggressive touring style
Faceshield is movable with visor in place
Touring colors
Meets or exceeds D.O.T. standards

CYBER U-217 Modular Helmet

Mon, 21 May 2012 03:13:18 +0000

Modular helmet
Multi position shield
ABS/PC shell construction
Removable/washable liner
Flip front helmet
Meets or exceeds D.O.T. standards

CYBER US-216 Flip Up Helmet

Mon, 21 May 2012 03:13:18 +0000

Revolutionary shell shape in ABS shell
Removable and washable liner
Quick releaseBase plate syste, allows you to easily change shields
Chin guards air intake carries the outside air to the shield inside surface, reducing fog
Upper air intake, for better air flow through the helmet and enhance interior cooling
Meets D.O.T. standards

Alpinestars RJ-5 Rain Pants

Mon, 21 May 2012 03:13:18 +0000

Alpinestars RJ-5 rain gear is the hot setup when the weather goes foul.

EVS NC G5 Ballistic Jersey

Mon, 21 May 2012 03:13:18 +0000

+ Hi-style upper arm brush guards + Lightweight cool ballistic fabric with mesh stretch panels for superior fit + Built in kidney belt for added lower torso protection + Easy on & off design + Fully machine washable

EVS G5 Ballistic Jersey

Mon, 21 May 2012 03:13:18 +0000

EVS G6 Lite Ballistic Jersey

Mon, 21 May 2012 03:13:18 +0000

+ Hi-style upper arm brush guards + Lightweight cool ballistic fabric with mesh stretch panels for superior fit + Sublimated sleeve graphics for long last and zero fade + Thumb hole to keep sleeves/elbow pads in place + Easy on & off design and fully machine washable

EVS G6 Ballistic Jersey

Mon, 21 May 2012 03:13:18 +0000

+ Hi-style upper arm brush guards + Lightweight cool ballistic fabric with mesh stretch panels for superior fit + Sublimated sleeve graphics for long last and zero fade + Built in kidney belt for added lower torso protection + Thumb hole to keep sleeves/elbow pads in place + Easy on & off design and fully machine washable

Alpinestars Oxygen Air Overpants Pants

Mon, 21 May 2012 03:13:18 +0000

Designed to be worn over casual pants, the Oxygen Air Overpants are an innovative option for summertime commuting. CE certified knee protectors and a durable Polyester construction ensure excellent resistance against impact and abrasion, while extended zippered gussets allow effortless fitment and removal of the pants while wearing boots

Alpinestars Durban Gore-Tex Pants

Mon, 21 May 2012 03:13:18 +0000

Featuring Alpinestars' patented Vector knee construction and a Gore-Tex Paclite Shell pant is perfect for the devoted trail-blazer. A removable bib and braces fitment option and integrated ventilation further enhance the pants' appeal to the adventure rider.

Alpinestars A-10 Air Textile Pants

Mon, 21 May 2012 03:13:18 +0000

Alpinestars Air-Flo system means maximum ventilation for riding with comfort and protection in hot conditions. Practical and convenient, combined with great styling and looks. Ride safely in the heat.

Alpinestars AirFlo Textile Pants

Mon, 21 May 2012 03:13:18 +0000

Great summer style and convenience is combined in these cleverly designed riding pants. The Air Flo system means maximum ventilation while riding with comfort and protection.

Alpinestars A-10 Sport Textile-Leather Pants

Mon, 21 May 2012 03:13:18 +0000

Designed to offer the practicality and flexibility of leather and textile, with improved ergonomics for increased comfort. Alpinestars A-10 Sport pants innovative construction offer a versatile solution for everyday riding.

Alpinestars Track Leather Pants

Mon, 21 May 2012 03:13:18 +0000

Performance full-grain leather pants combining ergonomic design with premium safety features. The protective high rear waist features a connection zipper that allows the Track Pant to be used with a selection of Alpinestars leather jackets.

Alpinestars GP Plus Leather Pants

Mon, 21 May 2012 03:13:18 +0000

Alpinestars GP Plus Leather Pants are cut from full-grain leather and feature accordion flex zones around the knees for enhanced mobility and comfort. Multi-stitched main seams and race-derived GP-R protectors grant exceptional levels of protection.

Alpinestars Raven Street Gloves

Mon, 21 May 2012 03:13:18 +0000

Blending high levels of protection with supreme comfort, the Raven glove offers the best of a sports glove and a short glove, with added ventilation.

Alpinestars Alloy Leather Gloves

Mon, 21 May 2012 03:13:18 +0000

Progressively styled deerskin road gloves with a high degree of comfort and ventilation.

Alpinestars Radiant Drystar Gloves

Mon, 21 May 2012 03:13:18 +0000

Full length touring glove constructed using Alpinestars exclusive Drystar glove insert lining combined with 3M C70 Thinsulate insulation to keep hands dry, warm, and comfortable during wet and chilly conditions. The Glove incorportes a wrist strap closure for a secure fit and an elastic cuff closure to keep moisture and cold from penetrating to the hands.

Alpinestars Vega Drystar Gloves

Mon, 21 May 2012 03:13:18 +0000

The Vega Drystar is an all-weather riding glove featuring a sporty design, premium protection and comfort details such as velour lining and Thinsulate thermal insulation.

Alpinestars SP-2 Leather Gloves

Mon, 21 May 2012 03:13:18 +0000

Alpinestars SP-2 glove has been developed to give improved performance and protection, while retaining style and practicality.

Alpinestars GPX Leather Gloves

Mon, 21 May 2012 03:13:18 +0000

Alpinestars race proven PU knuckle protection system features advanced airflow ventilation and thermoplastic PU for superior impact and abrasion resistance.

Alpinestars ST-1 Drystar Gloves

Mon, 21 May 2012 03:13:18 +0000

Alpinestars ST-1 is an exceptional waterproof and breathable insulated riding glove with a clean stylish design.

Alpinestars ATLAS Gloves

Mon, 21 May 2012 03:13:18 +0000

An innovative, unobtrusive, low profile glove that has been designed to be ultra lightweight and provide the rider with a real feeling of freedom. Integrating supreme levels of protection with cutting edge styling and unsurpassed levels of grip, this glove provides real flexibility for the offroad/enduro rider.

Alpinestars S-1 Leather Gloves

Mon, 21 May 2012 03:13:18 +0000

Aimed at the Supermoto/Naked bike user, the S1 glove offers urban riders the best of both worlds; extended cuffs offer addition protection around the wrist, whilst maintaining the flexibility and freedom of movement provided by a MX glove.

Alpinestars Octane S-Moto Leather Gloves

Mon, 21 May 2012 03:13:18 +0000

Designed specifically for Supermoto, Alpinestars stylish and innovative Octane S-Moto gloves feature the comfort, protection and flexibility demanded by the very best riders in the world.

Alpinestars SP-1 Leather Gloves

Mon, 21 May 2012 03:13:18 +0000

Alpinestars SP Series delivers a leather glove with carbon fiber knuckle and finger sliders, generous padding and accordion panels at major flex points for a seriously performing glove.

Alpinestars SPX Leather Gloves

Mon, 21 May 2012 03:13:18 +0000

A high performance, lightweight, multi-purpose, glove which combines racing technology with road riding comfort and convenience.

Alpinestars Pressure Air Gloves

Mon, 21 May 2012 03:13:18 +0000

A lightweight, leather and Air-Flo mesh, short-cuff glove. Ideal for summer street riding with a combination of effective venting and robust construction for comfort and safety in warm riding conditions.

Alpinestars GS Pro Leather Gloves

Mon, 21 May 2012 03:13:18 +0000

Nicky Hayden and Carlos Checa are just a couple of the world-class riders that have provided direct input into the design and development of the GP Pro racing gloves. They accept nothing less than the best and neither should you.

Alpinestars GS Plus Leather Gloves

Mon, 21 May 2012 03:13:18 +0000

Alpinestars New GP Plus glove builds on the attributes of this already very successful product with an updated design. The new glove features an enhancement of the 3rd and 4th finger bridge, additional polyurethane security sliders and a new Velcro closure system for ease of use, providing riders with the ultimate in security, functionality and style.

Alpine Stars SMX-2 Air Carbon Leather Gloves

Mon, 21 May 2012 03:13:18 +0000

Utilizing an advanced leather and mesh hybrid construction, Alpinestars SMX-2 Air Carbon Glove offers the street rider superior comfort and performance while the carbon fiber knuckle and Clarino.

SS Little Miss Dangerous Helmet

Mon, 21 May 2012 03:13:18 +0000

■“A.T.P.A.” Advanced Thermo-Poly Alloy Shell ■Meets or Exceeds DOT and ECE 22-05 standards ■“Coolmax” Removable, Washable and Moisture Wicking Liner ■“AirStrike” Direct Course Ventilation System ■“Lock 'N Load™” Rapid Conversion Shield Replacement System ■“ALL CLEAR! Sight System” Optically Correct, Anti-Scratch, Anti-Fog and UV Resistant Faceshield

SS Cat Outa Hell Helmet

Mon, 21 May 2012 03:13:18 +0000

■“A.T.P.A.” Advanced Thermo-Poly Alloy Shell ■Meets or Exceeds DOT and ECE 22-05 standards ■“Coolmax” Removable, Washable and Moisture Wicking Liner ■“AirStrike” Direct Course Ventilation System ■“Lock 'N Load” Rapid Conversion Shield Replacement Syste ■“ALL CLEAR! Sight System” Optically Correct, Anti-Scratch, Anti-Fog and UV Resistant Faceshield

SS Six Speed Sisters Helmet

Mon, 21 May 2012 03:13:18 +0000

■“A.T.P.A.™” Advanced Thermo-Poly Alloy Shell ■Meets or Exceeds DOT and ECE 22-05 standards ■“Coolmax” Removable, Washable and Moisture Wicking Liner ■“AirStrike” Direct Course Ventilation System ■“Lock 'N Load™” Rapid Conversion Shield Replacement System ■“ALL CLEAR! Sight System” Optically Correct, Anti-Scratch, Anti-Fog and UV Resistant Faceshield ■Quick Release Chin Strap ■"DVD!" Drop Visor Design ■"Pump-It!" Air Fit System

SS Go For Broke Half Helmet

Mon, 21 May 2012 03:13:18 +0000

■“A.F.C.S.” Advanced Fiberglass Composite Shell ■Meets Or Exceeds DOT Standards ■EPS Liner System For Narrower Profile Shell ■Quick Release Chin Strap ■“DVD” Drop Visor Design ■Removable Shorty Visor Included

SS Hard Knock Life Half Helmet

Mon, 21 May 2012 03:13:18 +0000

■“A.F.C.S.” Advanced Fiberglass Composite Shell ■Meets Or Exceeds DOT Standards ■EPS Liner System For Narrower Profile Shell ■Quick Release Chin Strap ■“DVD™” Drop Visor Design ■Removable Shorty Visor Included

SS Go For Broke Helmet

Mon, 21 May 2012 03:13:18 +0000

■“A.T.P.A.” ADVANCED THERMO-POLY ALLOY SHELL ■MEETS OR EXCEEDS DOT AND ECE 22-05 STANDARDS ■REMOVABLE, WASHABLE AND MOISTURE WICKING LINER ■ “AIRSTRIKE” DIRECT COURSE VENTILATION SYSTEM ■“LOCK ‘N LOAD” RAPID CONVERSION SHIELD REPLACEMENT SYSTEM ■“ALL CLEAR! SIGHT SYSTEM” OPTICALLY CORRECT, ANTI-SCRATCH, AND UV RESISTANT FACESHIELD ■QUICK RELEASE CHIN STRAP

SS Trial By Fire Helmet

Mon, 21 May 2012 03:13:18 +0000

SS Top Dead Center

Mon, 21 May 2012 03:13:18 +0000

SS Under The Radar Helmet

Mon, 21 May 2012 03:13:18 +0000

■“A.T.P.A.” Advanced Thermo-Poly Alloy Shell ■Meets or Exceeds DOT and ECE 22-05 standards ■“Coolmax” Removable, Washable and Moisture Wicking Liner ■“AirStrike” Direct Course Ventilation System ■“Lock 'N Load” Rapid Conversion Shield Replacement System ■“ALL CLEAR! Sight System” Optically Correct, Anti-Scratch, Anti-Fog and UV Resistant Faceshield

SS My Weapon Helmet

Mon, 21 May 2012 03:13:18 +0000

■“A.T.P.A.™” Advanced Thermo-Poly Alloy Shell ■Meets or Exceeds DOT and ECE 22-05 standards ■“Coolmax” Removable, Washable and Moisture Wicking Liner ■“AirStrike” Direct Course Ventilation System ■“Lock 'N Load” Rapid Conversion Shield Replacement System ■“ALL CLEAR! Sight System” Optically Correct, Anti-Scratch, Anti-Fog and UV Resistant Faceshield

SS Fame and Fortune Helmet

Mon, 21 May 2012 03:13:18 +0000

■“A.T.P.A.” Advanced Thermo-Poly Alloy Shell ■Meets or Exceeds DOT and ECE 22-05 standards ■“Coolmax” Removable, Washable and Moisture Wicking Liner ■“AirStrike” Direct Course Ventilation System ■“Lock 'N Load” Rapid Conversion Shield Replacement System ■“ALL CLEAR! Sight System” Optically Correct, Anti-Scratch, Anti-Fog and UV Resistant Faceshield

SS Call To Arms Helmet

Mon, 21 May 2012 03:13:18 +0000

SS The Power And The Glory

Mon, 21 May 2012 03:13:18 +0000

■“A.T.P.A.” Advanced Thermo-Poly Alloy Shell ■Meets or Exceeds DOT and ECE 22-05 standards ■“Coolmax” Removable, Washable and Moisture Wicking Liner ■“AirStrike” Direct Course Ventilation System ■“Lock 'N Load” Rapid Conversion Shield Replacement System ■“ALL CLEAR! Sight System” Optically Correct, Anti-Scratch, Anti-Fog and UV Resistant Faceshield

SS Run With The Bulls

Mon, 21 May 2012 03:13:18 +0000

■“A.T.P.A.” Advanced Thermo-Poly Alloy Shell ■Meets or Exceeds DOT and ECE 22-05 standards ■“Coolmax” Removable, Washable and Moisture Wicking Liner ■“AirStrike” Direct Course Ventilation System ■“Lock 'N Load” Rapid Conversion Shield Replacement System ■“ALL CLEAR! Sight System” Optically Correct, Anti-Scratch, Anti-Fog and UV Resistant Faceshield

SS Bikes Are In My Blood Helmet

Mon, 21 May 2012 03:13:18 +0000

■"A.T.P.A." Advanced Thermo-Poly Alloy Shell ■Meets or Exceeds DOT and ECE 22-05 standards ■“Coolmax” Removable, Washable and Moisture Wicking Liner ■“AirStrike™” Direct Course Ventilation System ■“Lock 'N Load™” Rapid Conversion Shield Replacement System ■“ALL CLEAR! Sight System” Optically Correct, Anti-Scratch, Anti-Fog and UV Resistant Faceshield

SS Off The Chain Helmet

Mon, 21 May 2012 03:13:18 +0000

SS Seven Sins Helmet

Mon, 21 May 2012 03:13:18 +0000

■“A.T.P.A.” Advanced Thermo-Poly Alloy Shell ■Meets or Exceeds DOT and ECE 22-05 standards ■“Coolmax” Removable, Washable and Moisture Wicking Liner ■“AirStrike” Direct Course Ventilation System ■“Lock 'N Load” Rapid Conversion Shield Replacement System ■“ALL CLEAR! Sight System” Optically Correct, Anti-Scratch, Anti-Fog and UV Resistant Faceshield ■Quick Release Chin Strap ■"DVD!" Drop Visor Design ■"Pump-It!™" Air Fit System

SS Hard Knock Life Helmet

Mon, 21 May 2012 03:13:18 +0000

■“A.T.P.A.” Advanced Thermo-Poly Alloy Shell ■Meets or Exceeds DOT and ECE 22-05 standards ■“Coolmax” Removable, Washable and Moisture Wicking Liner ■“AirStrike” Direct Course Ventilation System ■“Lock 'N Load” Rapid Conversion Shield Replacement System ■“ALL CLEAR! Sight System” Optically Correct, Anti-Scratch, Anti-Fog and UV Resistant Faceshield ■Quick Release Chin Strap ■"DVD!" Drop Visor Design ■"Pump-It!" Air Fit System

SS Twist of Fate Helmet

Mon, 21 May 2012 03:13:18 +0000

■“H.P.F.” High Performance Fiberglass Composite Shell ■Snell M2010 Approved And Meets Or Exceeds D.O.T. Standards ■“Coolmax” Removable, Washable and Moisture Wicking Liner ■“AirStrike” Direct Course Ventilation System ■“Lock 'N Load” Rapid Conversion Shield Replacement System ■“ALL CLEAR! Sight System” Optically Correct, Anti-Scratch, Anti-Fog and UV Resistant Faceshield

HJC CL-XY Fuze Youth Helmet

Mon, 21 May 2012 03:13:18 +0000

Polycarbonate Composite Shell: Lightweight, superior fit and comfort using advanced CAD technology. •Advanced Ventilation System: Full front to back airflow flushes heat and humidity up and out. •Plush, Nylex Interior: Comfortable, removable, and washable. •Large Eye Port and Maximum Range Adjustable Visor: For maximum visibility and superior goggle fit. •DOT Approved

HJC CL-XY Vampiro Youth Helmet

Mon, 21 May 2012 03:13:18 +0000

HJC CL-XY Wanted Youth Helmet

Mon, 21 May 2012 03:13:18 +0000

HJC CL-XY Solid Youth Helmet

Mon, 21 May 2012 03:13:18 +0000

HJC CL-XY Frenzy Youth Helmet

Mon, 21 May 2012 03:13:18 +0000

HJC CS-MX Charge Helmet

Mon, 21 May 2012 03:13:18 +0000

Polycarbonate Composite Shell: Lightweight, superior fit and comfort using advanced CAD technology. •"ACS" Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out. •Plush, Nylex Interior: Comfortable, removable and washable. • Large Eye Port: for maximum visibility and superior goggle fit. • DOT Approved

HJC CS-MX Scourge Helmet

Mon, 21 May 2012 03:13:18 +0000

HJC CS-MX Thrust Helmet

Mon, 21 May 2012 03:13:18 +0000

HJC CS-MX Blizzard Helmet

Mon, 21 May 2012 03:13:18 +0000

HJC CL-X6 SLASH HELMET

Mon, 21 May 2012 03:13:18 +0000

Advanced Polycarbonate Composite Shell: Revolutionary design with unique visor. Lightweight, superior fit and comfort using advanced CAD technology. “ACS” Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out. SpeedCool™ Interior: Removable, moisture-wicking and odor-free with anti-bacterial fabric. Large Eye Port: For maximum visibility and superior goggle fit. SNELL/DOT Approved

HJC CL-X6 FUZE HELMET

Mon, 21 May 2012 03:13:18 +0000

HJC CL-X6 Kosmoz HELMET

Mon, 21 May 2012 03:13:18 +0000

HJC CL-X6 RYOT HELMET

Mon, 21 May 2012 03:13:18 +0000

HJC CL-X6 Hydron HELMET

Mon, 21 May 2012 03:13:18 +0000

HJC CL-X6 SOLID HELMET

Mon, 21 May 2012 03:13:18 +0000

HJC CL-X6 CHAOS HELMET

Mon, 21 May 2012 03:13:18 +0000

HJC CL-X6 FRENZY HELMET

Mon, 21 May 2012 03:13:18 +0000

HJC SPX MATTE BLACK HELMET

Mon, 21 May 2012 03:13:18 +0000

•Advanced Polycarbonate Composite Weave Shell: Lightweight, superior fit and comfort using advanced CAD technology. ALSO AVAILABLE IN SOLID COLORS • 3rd-Generation “ACS” Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out. •SilverCool Interior: Moisture-wicking and odor-free interior with advanced silver anti-bacterial fabric. Crown and cheek pads are removable and washable. • Large Eye Port and Maximum Range Adjustable Visor: For maximum visibility and superior goggle fit. • SNELL/DOT Approved

HJC SPX SOLID HELMET

Mon, 21 May 2012 03:13:18 +0000

HJC SPX VENOM HELMET

Mon, 21 May 2012 03:13:18 +0000

HJC SPX ERUPTION HELMET

Mon, 21 May 2012 03:13:18 +0000

HJC SPX TORCH HELMET

Mon, 21 May 2012 03:13:18 +0000

HJC CL-MAX II ZADER

Mon, 21 May 2012 03:13:18 +0000

•Ready for Bluetooth Communication (Bluetooth unit sold separately). • Advanced Polycarbonate Composite Shell with Adjustable Polycarbonate Chinbar: Lightweight, superior fit and comfort using advanced CAD technology. • Single-button Chinbar/Faceshield Release: Open with one hand even with gloves on* • Optically Superior Faceshield: 95% UV protection. • QuickSlide™ Shield Replacement System (HJ-17 Shield):Quick, secure, tool-less removal and installation. • "ACS" Advanced Channeling Ventilation System:Full front to back airflow flushes heat and humidity up and out. • Bioceramic Nylex® Moisture-wicking Interior:Anti-bactrial, removable and washable. • DOT Approved

HJC CL-MAX II Black-White

Mon, 21 May 2012 03:13:18 +0000

HJC CL-MAX II Solids

Mon, 21 May 2012 03:13:18 +0000

HJC IS-MAX BT Multi

Mon, 21 May 2012 03:13:18 +0000

•Ready for Bluetooth Communications: Built in recesses for the ChatterBox XBi2-H and speakers. •Advanced Polycarbonate Composite Shell with Adjustable Policarbonate Chinbar: Lightweight, superior fit and comfort using advanced CAD technology. •One-touch Integrated SunShield: Smoke-tinted 3-stage adjustable SunShield deploys quickly and easily (U.S. PAT. #7,540,033). •Single-button Chinbar/Faceshield Release: Open with one hand even with gloves on. • Optically Superior Faceshield: 95% UV protection. •QuickSlide Shield Replacement System: Quick, secure, tool-less removal and installation. • "ACS" Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out. •SilverCool™ Interior: Moisture-wicking and odor-free interior with advanced silver anti-bacterial fabric. Crwon and cheek pads are removable and washable. • DOT Approved

HJC IS-MAX BT SOLIDS

Mon, 21 May 2012 03:13:18 +0000

HJC Sy-Max III Solid

Mon, 21 May 2012 03:13:18 +0000

•Advanced Fiberglass Shell with Adjustable Polycarbonate Chin Bar: Lightweight, superior fit and comfort using advanced CAD technology. •One-Touch Integrated Sunshield : Three positions for sunshield sliding lever which is adjustable, smoke tinted Sunshield deploys quickly and easily • Optically superior Pinlock®-prepared Faceshield: New 3D design, an anti-scratch coating and is prepared for the ultimate anti-fog Pinlock insert. •Single-button Chin Bar/Faceshield Release : Open with one hand even with gloves on. •SilverCool™ Interior: Moisture-wicking and odor-free interior with advanced silver anti-bacterial fabric. Crown and cheek pads are removable and washable. •Ready for Bluetooth communication : Built in recesses for the ChatterBox™ and speakers. •DOT Approved

HJC CL-Y Solid Youth Helmet

Mon, 21 May 2012 03:13:18 +0000

•True Youth Size Polycarbonate Shell: True Youth Size Polycarbonate Shell: • Integrated Ventilation System: Provides cooling airflow. • Plush, Nylex ®Interior: Washable and Removable • Large Eye Port Design: For maximum visibility. • Flush-mounted Shield/Ratchet System: Simple and easy to use • DOT Approved.

HJC CL-Y RAZZ Youth Helmet

Mon, 21 May 2012 03:13:18 +0000

HJC CL-Y Katzilla Youth Helmet

Mon, 21 May 2012 03:13:18 +0000

HJC CS-R2 SOLID HELMET

Mon, 21 May 2012 03:13:18 +0000

•Advanced Polycarbonate Composite Shell: Lightweight, superior fit and comfort using advanced CAD technology. • RapidFire Shield Replacement System: Quick, secure, tool-less removal and installation. • Optically Superior Faceshield: 95% UV protection. • Advanced Ventilation System: Adjustable forehead and chin vents, and two rear exhaust vents. • Plush, Nylex Interior: Crown and cheek pads are removable and washable • DOT Approved.

HJC CS-R2 SKARR

Mon, 21 May 2012 03:13:18 +0000

HJC CS-R2 THUNDER

Mon, 21 May 2012 03:13:18 +0000

HJC CS-R1 PARADOX

Mon, 21 May 2012 03:13:18 +0000

•Advanced Polycarbonate Composite Shell: Lightweight, superior fit and comfort using advanced CAD technology. • RapidFire™ Shield Replacement System: Quick, secure, tool-less removal and installation. • Optically Superior Faceshield: 95% UV protection. • Advanced Ventilation System: Adjustable forehead and chin vents, and two rear exhaust vents. • Plush, Nylex® Interior: Removable and washable cheek pads. • DOT Approved

HJC CS-R1 INFERNO

Mon, 21 May 2012 03:13:18 +0000

HJC CS-R1 SAMURAI

Mon, 21 May 2012 03:13:18 +0000

HJC CS-R1 DAGGAR

Mon, 21 May 2012 03:13:18 +0000

HJC CL-16 SHOCK

Mon, 21 May 2012 03:13:18 +0000

Advanced Polycarbonate Composite Shell: Lightweight, superior fit and comfort using advanced CAD technology. •Optically superior Pinlock®-prepared Faceshield: Provides 95% UV protection and is ready for the ultimate fog-resistant insert. •RapidFire™ Shield Replacement System: Quick, secure, tool-less removal and installation. •”ACS” Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out. •SpeedCool™ Interior: Removable, moisture-wicking and odor-free with anti-bacterial fabric. •SNELL/DOT Approved

HJC CL-16 NARRL

Mon, 21 May 2012 03:13:18 +0000

HJC CL-16 HELLION

Mon, 21 May 2012 03:13:18 +0000

HJC CL-16 RAZZ

Mon, 21 May 2012 03:13:18 +0000

HJC CL-16 SOLID

Mon, 21 May 2012 03:13:18 +0000

HJC CL-16 CARNAGE

Mon, 21 May 2012 03:13:18 +0000

HJC CL-16 SLAYER

Mon, 21 May 2012 03:13:18 +0000

HJC IS-16 LASH

Mon, 21 May 2012 03:13:18 +0000

•Advanced Polycarbonate Composite Shell: Lightweight, superior fit and comfort using advanced CAD technology. •One-touch Integrated SunShield: Smoke-tinted 3-stage adjustable SunShield deploys quickly and easily (patent pending). •AccuSight™ Anti-fog Faceshield: Optically superior 3D design provides 95% UV protection and an anti-scratch coating. • RapidFire™ Shield Replacement System: Quick, secure, tool-less removal and installation. • "ACS" Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out •SilverCool™ Interior: Moisture-wicking and odor-free interior with advanced silver anti-bacterial fabric. Comfortable, removable and washable. • DOT Approved

HJC IS-16 OTHOS

Mon, 21 May 2012 03:13:18 +0000

HJC IS-16 SPECTER

Mon, 21 May 2012 03:13:18 +0000

HJC IS-16 RAMPER

Mon, 21 May 2012 03:13:18 +0000

•Advanced Polycarbonate Composite Shell: Lightweight, superior fit and comfort using advanced CAD technology. •One-touch Integrated SunShield: Smoke-tinted 3-stage adjustable SunShield deploys quickly and easily (patent pending). •AccuSight Anti-fog Faceshield: Optically superior 3D design provides 95% UV protection and an anti-scratch coating. • RapidFire Shield Replacement System: Quick, secure, tool-less removal and installation. • "ACS" Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out •SilverCool™ Interior: Moisture-wicking and odor-free interior with advanced silver anti-bacterial fabric. Comfortable, removable and washable. • DOT Approved

HJC IS-16 SOLIDS

Mon, 21 May 2012 03:13:18 +0000

HJC IS-16 ARKANIUM

Mon, 21 May 2012 03:13:18 +0000

HJC IS-16 SCRATCH

Mon, 21 May 2012 03:13:18 +0000

•Advanced Polycarbonate Composite Shell: Lightweight, superior fit and comfort using advanced CAD technology. •One-touch Integrated SunShield: Smoke-tinted 3-stage adjustable SunShield deploys quickly and easily (patent pending). •AccuSight Anti-fog Faceshield: Optically superior 3D design provides 95% UV protection and an anti-scratch coating. • RapidFire Shield Replacement System: Quick, secure, tool-less removal and installation. • "ACS" Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out •SilverCool™ Interior: Moisture-wicking and odor-free interior with advanced silver anti-bacterial fabric. Comfortable, removable and washable. • DOT Approved

HJC FS-15 Carbon Black

Mon, 21 May 2012 03:13:18 +0000

• Carbon Fiber Composite Weave Shell: Extremely lightweight. Superior fit and comfort using advanced CAD technology. • Optically-superior Pinlock®-prepared Faceshield: New 3D design provides 95% UV protection, an anti-scratch coating and is prepared for the ultimate anti-fog Pinlock insert. •RapidFire™ Shield Replacement System: Quick, secure, tool-less removal and installation.. •"ACS" Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out. • SilverCool™ Interior: Removable moisture-wicking and odor-free interior with advanced silver anti-bacterial fabric. • SNELL/DOT Approved

HJC FS-15 Carbon Colors

Mon, 21 May 2012 03:13:18 +0000

• Carbon Fiber Composite Weave Shell: Extremely lightweight. Superior fit and comfort using advanced CAD technology. • Optically-superior Pinlock-prepared Faceshield: New 3D design provides 95% UV protection, an anti-scratch coating and is prepared for the ultimate anti-fog Pinlock insert. •RapidFire Shield Replacement System: Quick, secure, tool-less removal and installation.. •"ACS" Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out. • SilverCool™ Interior: Removable moisture-wicking and odor-free interior with advanced silver anti-bacterial fabric. • SNELL/DOT Approved

HJC RPS-10 Mugello Helmet

Mon, 21 May 2012 03:13:18 +0000

•Max Air-flow Top Vent: Variable air flow is adjusted by glove-friendly dials on each intake vent. • Advanced P.I.M. (Premium Integrated Matrix) Fiberglass: Super lightweight shell is designed for superior fit and comfort using advanced CAD technology. • RapidFire Shield Replacement System: Simple and secure shield ratchet system provides ultra-quick, tool-less removal and installation for efficient operation. • Optically-superior Pinlock®-prepared 2D Flat-Racing Shield:Our innovative Center one-touch open/close locking system is designed for an extremely secure seal. • "ACS" Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out. Countless hours of development and testing conducted inside of our advanced wind tunnel have resulted in absolute smooth air flow both inside and outside. The reward is low wind resistance and maximum ventilation. • SilverCool Plus Interior: Premium soft feel with Ginkgo Extract, moisture-wicking and odor-free interior with advanced silver anti-bacterial fabric. Crown and cheek pads are fully removable and washable. • SNELL/DOT Approved.

HJC RPS-10 Solid Helmet

Mon, 21 May 2012 03:13:18 +0000

HJC RPS-10 Patriot Helmet

Mon, 21 May 2012 03:13:18 +0000

HJC RPS-10 Ben Spies Replica Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI Hornet-DS Black Helmet

Mon, 21 May 2012 03:13:18 +0000

Have you ever been cruising down the highway on your street bike when out of nowhere you spot some off-road terrain that looks absolutely irresistible? We have, which is precisely why we created the Hornet-DS. Bridging all gaps between road and off-road riding, the Hornet-DS boasts an outstanding list of features that includes AIM+ shell construction, SHOEI’s exclusive 3D Max-Dry Liner, and a wind-tight flip-up shield that offers the versatility of using goggles in dusty conditions. The only helmet for serious dual-sport riders, the Hornet-DS comes complete with everything but a set of knobbies.

SHOEI Hornet-DS Solid Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI ST-Cruz Black-White Helmet

Mon, 21 May 2012 03:13:18 +0000

Traditional retro styling with unsurpassed quality standards that only SHOEI can provide—the ST-Cruz is the open-face helmet that the cruiser class can’t get enough of. With a removable neck curtain that zippers into the interior lining for versatile looks and protection, the ST-Cruz is the perfect blend of traditional styling and modern engineering.

SHOEI ST-Cruz Solid Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI RJ-Platinum R Black-White Helmet

Mon, 21 May 2012 03:13:18 +0000

Not your parent’s old lid, the RJ Platinum-R establishes a higher standard for what an open-face helmet should be. Contemporary styling along with an improved and adjustable fit, a fully removable and washable interior, enhanced ventilation performance, and a remarkably quiet riding experience endow the RJ Platinum-R with an elevated level of excellence. Combined with SHOEI’s heritage of fine craftsmanship and benchmark safety technology, you’re left with the world’s premier open-face helmet—the RJ Platinum-R.

SHOEI RJ-Platinum R Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI Multitec Black-White Helmet

Mon, 21 May 2012 03:13:18 +0000

Looking for convenience, versatility, and security all in one? Welcome to the functional world of the SHOEI Multitec. Recognized for the convenience and versatility provided by its ability to convert instantly to an open-face configuration, the Multitec’s modular design allows riders to perform tasks that would normally require the removal of a full-face helmet. Its streamlined and aerodynamic shape, impressively quiet riding traits, excellent ventilation, and luxurious fit provide riders with unparalleled performance and comfort, all with the versatility of a true two-in-one helmet.

SHOEI Multitec Solid Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI Neotec Black-White Helmet

Mon, 21 May 2012 03:13:18 +0000

With the popularity of sport and adventure touring at an all-time high, the advancement of the incredibly versatile modular helmet segment was a must for SHOEI engineers. Though still a respected part of our 2012 helmet lineup, the Multitec’s modular design was used as a backbone, analyzed with scrupulous eyes, and tweaked ever so slightly to yield the most progressive flip-up helmet on the market today—the all-new Neotec. Boasting improved shell aerodynamics, a wider and taller field of vision, a reduction in wind noise, an internal sun shield, and a fully removable, washable and replaceable liner system, the Neotec is the next level of modular helmet design for today’s hybrid motorcyclists.

SHOEI Neotec Solid Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI RF1100 Black-White Helmet

Mon, 21 May 2012 03:13:18 +0000

No matter what we ride, where our final destination, or the path we choose to get there, every motorcyclist shares the same common thread when throwing a leg over their machine. It’s the exhilarating search for adventure that draws us to the road, and SHOEI’s all-new QWEST embodies what every rider seeks to experience along the way. Revolutionary noise-reduction technology, unsurpassed long-distance comfort, advanced ventilation performance, a light-weight, balanced fit and feel, and over 50 years of helmet-building experience have combined to deliver the finest touring helmet known to man. The all-new, groundbreaking QWEST—It’s your journey… Enjoy every mile of it.

SHOEI QWEST Solids Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI QWEST Neuron Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI QWEST Goddess Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI QWEST Ethereal Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI QWEST Airfoil Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI QWEST Passage Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI QWEST Overt Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI QWEST Diverge Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI RF1100 Helmets

Mon, 21 May 2012 03:13:18 +0000

Unrivaled in every feature category, there’s not another helmet on the market that truly embodies motorcycling quite like the RF-1100. Building helmets isn’t just a means to an end for us here at SHOEI, it’s a passion that we fulfill daily, which is why we stopped at no end while evolving the RF-1100 into our best seller. Combining customer and dealer requests with state-of-the-art technology and everything learned over 50 years of premium helmet development has yielded the finest sport-touring full-face that money can buy. The groundbreaking RF-1100—where aggressive styling meets SHOEI’s unrivaled attention to detail. The Evolution of Perfection never ends...

SHOEI RF1100 Solids Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI RF1100 Seilon Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI RF1100 Enigma Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI RF1100 Diabolic Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI RF1100 Conqueror Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI RF1100 Pious Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI RF1100 Hadron2 Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI RF1100 Corazon Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI RF1100 Chroma Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI RF1100 Merciless Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI X-TWELVE Black-White Helmet

Mon, 21 May 2012 03:13:18 +0000

The demands that a world-class racer puts on his or her equipment may be second to none, but that hasn’t stopped SHOEI from producing a pure racing helmet that can also meet the needs of today’s performance-driven enthusiasts. Born from racing, the X-Twelve combines integral feedback from professional racers around the globe with SHOEI’s 50 years of helmet building experience, the very latest in technology, and the most advanced materials known to man. Track certified by the fastest riders on the planet, the X-Twelve’s innovative features unite to form the most progressive racing helmet on the market.

SHOEI X-TWELVE Solid Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI X-TWELVE Vermeulen5 Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI X-TWELVE Streamliner Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI X-TWELVE Kiyonari2 Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI X-TWELVE Glory2 Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI X-TWELVE B-Boz Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI X-TWELVE Reverb Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI X-TWELVE Laseca Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI X-TWELVE Elias2 Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI X-TWELVE Bautista Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI VFX-W Matte Black Helmet

Mon, 21 May 2012 03:13:18 +0000

With so many helmet options available to the motocross and off-road riding and racing communities, SHOEI takes great pride in the fact that more top riders prefer the groundbreaking VFX-W over all others. The absolute pinnacle of off-road helmets, the VFX-W is the result of countless hours of conceptualization, R&D, and testing with the most hard-nosed critics of all, our professional racing team. With top pros like Kevin Windham, Josh Grant, Josh Strang, and Destry Abbott leading the charge, the VFX-W is drenched in state-of-the-art features, and absolutely no stone was left unturned during its development. If you’re looking for a new lid to hit the track or trail, look no further.

SHOEI VFX-W Solid Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI VFX-W Malice Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI VFX-W K-DUB2 Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI VFX-W Grant Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI VFX-W Crosshair Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI VFX-W Salute Helmet

Mon, 21 May 2012 03:13:18 +0000

SHOEI VFX-W Dissent Helmet

Mon, 21 May 2012 03:13:18 +0000

GO PRO HD HERO 2 MOTOSPORT CAMERA

Mon, 21 May 2012 03:13:18 +0000

1 11MP HD HERO2 Camera
1 Waterproof Housing (197′ / 60m)
1 HD Skeleton Backdoor
1 Rechargeable Li-ion Battery
1 USB Cable
1 Suction Cup Mount
1 J-Hook Buckle
2 Curved Surface Adhesive Mounts
3 Flat Surface Adhesive Mounts
1 Three-Way Pivot Arm
Assorted Mounting Hardware

TROY LEE GP HISTORY PANTS

Mon, 21 May 2012 03:13:18 +0000

The most versatile pant in our entire lineup. Whether it be motocross, BMX or mountain bike racing, the super-durable and dynamic GP Pant works with the human body to emphasize comfort while maximizing a full range of motion. All in one, and everything you need when the time comes to twist the throttle or push the pedals.

TROY LEE GP HOTROD PANTS

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP SPEEDSHOP PANTS

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP BEAST PANTS

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP SHOCKER PANTS

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP AIR STINGER PANTS

Mon, 21 May 2012 03:13:18 +0000

The GP Air race pant is purpose-built to fend off the nastiest heat and humidity. Researched and developed to optimize ventilation, the GP Air pant helps lower body temperatures and minimize fatigue. Ultra-light, highly durable and remarkably comfortable, the GP Air pant is unmatched when it comes to supernatural heat and wilting humidity.

TROY LEE GP AIR MEDUSA PANTS

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP AIR BEAST PANTS

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP AIR TEAM PANTS

Mon, 21 May 2012 03:13:18 +0000

TROY LEE SE PISTONBONE PANTS

Mon, 21 May 2012 03:13:18 +0000

SE Pro Race Pants are the embodiment of the very best research, development and ingenuity that Troy Lee Designs has to offer. With an unprecedented ability to fine-tune the perfect fit, the SE Pro pant is designed to follow your form, no matter how your body moves

TROY LEE SE PRO IMPERIAL PANTS

Mon, 21 May 2012 03:13:18 +0000

TROY LEE SE PRO CORSE PANTS

Mon, 21 May 2012 03:13:18 +0000

FOX BOMBER GLOVE

Mon, 21 May 2012 03:13:18 +0000

Full coverage protection is best defined by a tough double layer palm, molded plastic knuckles, generous ventilation and all the great colorways that make the Fox Bomber Glove a fan favorite. . Custom perforated leather offers both protection & maximum airflow . Double layer Ax Suede Fit® palm offers exceptional grip & durability . Composite hard knuckle & finger protection for maximum impact resistance . Additional TPR hand & finger guards for added protection . Low profile wrist tab closure

TROY LEE WOMENS VOODOO JERSEY

Mon, 21 May 2012 03:13:18 +0000

Purposely designed to match many of our race pants, the highly versatile GP Jersey is a perfect choice for all types of riding and racing conditions. The GP Jersey incorporates the clean lines, style and functionality that is Troy Lee Designs. With it's 100% flat-back polyester construction, the highly comfortable GP Jersey comes in sizes to fit most everyone.

TROY LEE WOMENS SPEEDWAY JERSEY

Mon, 21 May 2012 03:13:18 +0000

The GP Air Jersey maximizes cooling and airflow even when the heat index approaches red line. Athletically cut from small holed micro mesh fiber and featuring a V-neck collar and raglan sleeves, the GP Air is the lightest, highest performing jersey in motorcross.

FOX DIRTPAW CHAPTER GLOVE

Mon, 21 May 2012 03:13:18 +0000

The freshly-renovated Fox Dirtpaw Chapter Glove uses a completely padded knuckle, padded palm and superior flex-point comfort to remain the top choice for the entry-level rider.

FOX DIRTPAW UNDERTOW GLOVE

Mon, 21 May 2012 03:13:18 +0000

A high performing glove without the high price tag. The freshly-renovated Fox Dirtpaw Undertow Glove uses a completely padded knuckle, padded palm and superior flex-point comfort to remain the top choice for the entry-level rider..

TROY LEE ADVENTURE JERSEY

Mon, 21 May 2012 03:13:18 +0000

Whether you are a casual trail rider or a serious off-road racer, you will be able to appreciate the details that went into our new Adventure Jersey. Reflective chest and sleeve logos for night riding visibility and safety.

FOX DIRTPAW GLOVE

Mon, 21 May 2012 03:13:18 +0000

The freshly-renovated Fox Dirtpaw Glove uses a completely padded knuckle, padded palm and superior flex-point comfort to remain the top choice for the entry-level rider. . Lightweight air mesh top hand fabrics offer maximum comfort & airflow . Neoprene knuckle for added flexibility & protection . Padded, single layer Ax Suede Fit® palm offers exceptional durability & grip . Silicone fingertip print for added grip . Low profile wrist tab closure

TROY LEE GP MIDNIGHT JERSEY

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP HISTORY JERSEY

Mon, 21 May 2012 03:13:18 +0000

FOX AIRLINE ROCKSTAR GLOVE

Mon, 21 May 2012 03:13:18 +0000

Grab a handful of style while maintaining simplicity with the Fox Rockstar Airline Glove, a spinoff of our popular perforated design laced with a dash of Rockstar attitude. . Lightweight, flexible top hand fabrics offer maximum comfort & airflow . Airprene slip-on cuff design for an unrestricted feel . Perforated, single-layer Ax Suede Fit palm offers exceptional grip & hand-to-bike connection . Silicone fingertip print for added grip

TROY LEE GP HOT ROD JERSEY

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP SPEEDSHOT JERSEY

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP BEAST JERSEY

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP MEDUSA JERSEY

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP SHOCKER JERSEY

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP AIR STINGER JERSEY

Mon, 21 May 2012 03:13:18 +0000

FOX AIRLINE HELMET

Mon, 21 May 2012 03:13:18 +0000

Freedom of movement through simplicity and style, the redesigned Fox Airline Enterprize Glove sports tremendous slip-on comfort, increased durability, better breathability and that single-layer perforated palm that our top racers love.

FOX COVERT GLOVE

Mon, 21 May 2012 03:13:18 +0000

A race-inspired fit in a full-coverage chassis, the Fox 360 Covert Glove is unparalleled in terms of padded palm comfort and silicone-aided connectivity with the bike

360 FUTURE GLOVE

Mon, 21 May 2012 03:13:18 +0000

A race-inspired fit in a full-coverage chassis, the Fox 360 Future Glove is unparalleled in terms of padded palm comfort and silicone-aided connectivity with the bike.

360 FLIGHT GLOVE

Mon, 21 May 2012 03:13:18 +0000

A race-inspired fit in a full-coverage chassis, the Fox 360 Flight Glove is unparalleled in terms of padded palm comfort and silicone-aided connectivity with the bike.

FOX THE BONES GLOVES

Mon, 21 May 2012 03:13:18 +0000

SPORT UTILITY
Keep it warm and casual with this splendidly simple spectator glove: the Fox Mudpaw Bones Glove.

FOX PAWTECTOR GLOVE

Mon, 21 May 2012 03:13:18 +0000

The best glove in motocross just got even better via an all new double-layer palm, more pliable main body material, airprene knuckle construction, silicone gripper fingertips and a secure hook-and-loop closure for that classic Fox Pawtector performance.

FOX PLATINUM RACE GLOVES

Mon, 21 May 2012 03:13:18 +0000

Become one with the machine and twist a grip using the Fox Platinum Glove’s unrestrictive single-layer palm and form-fitting contour.

SE3 Helmet Team

Mon, 21 May 2012 03:13:18 +0000

New dual density eps foam
New top scoop design
New mouthpiece design and removable nose guard
Quick-release cheek pads for emergency helmet removal
Titanium hardware for reduced weight, durability and style
Indents for communication ear piece
Exceeds Snell M2010, M2005, US DOT, AU and CE standards
Multiple U.S. patents pending for design and ventilation
Includes deluxe helmet bag and 2 color-matched Vortex visors
3-year limited warranty

SE3 Helmet Pistonbone Purple

Mon, 21 May 2012 03:13:18 +0000

New dual density eps foam
New top scoop design
New mouthpiece design and removable nose guard
Quick-release cheek pads for emergency helmet removal
Titanium hardware for reduced weight, durability and style
Indents for communication ear piece
Exceeds Snell M2010, M2005, US DOT, AU and CE standards
Multiple U.S. patents pending for design and ventilation
Includes deluxe helmet bag and 2 color-matched Vortex visors
3-year limited warranty

SE3 Helmet Pistonbone Red/Gold

Mon, 21 May 2012 03:13:18 +0000

New dual density eps foam
New top scoop design
New mouthpiece design and removable nose guard
Quick-release cheek pads for emergency helmet removal
Titanium hardware for reduced weight, durability and style
Indents for communication ear piece
Exceeds Snell M2010, M2005, US DOT, AU and CE standards
Multiple U.S. patents pending for design and ventilation
Includes deluxe helmet bag and 2 color-matched Vortex visors
3-year limited warranty

SE3 Helmet Beast Blue/Yellow

Mon, 21 May 2012 03:13:18 +0000

New dual density eps foam
New top scoop design
New mouthpiece design and removable nose guard
Quick-release cheek pads for emergency helmet removal
Titanium hardware for reduced weight, durability and style
Indents for communication ear piece
Exceeds Snell M2010, M2005, US DOT, AU and CE standards
Multiple U.S. patents pending for design and ventilation
Includes deluxe helmet bag and 2 color-matched Vortex visors
3-year limited warranty

SE3 Helmet Beast Black/Silver

Mon, 21 May 2012 03:13:18 +0000

New dual density eps foam
New top scoop design
New mouthpiece design and removable nose guard
Quick-release cheek pads for emergency helmet removal
Titanium hardware for reduced weight, durability and style
Indents for communication ear piece
Exceeds Snell M2010, M2005, US DOT, AU and CE standards
Multiple U.S. patents pending for design and ventilation
Includes deluxe helmet bag and 2 color-matched Vortex visors
3-year limited warranty

SE3 Helmet Zap Blue/Red

Mon, 21 May 2012 03:13:18 +0000

New dual density eps foam
New top scoop design
New mouthpiece design and removable nose guard
Quick-release cheek pads for emergency helmet removal
Titanium hardware for reduced weight, durability and style
Indents for communication ear piece
Exceeds Snell M2010, M2005, US DOT, AU and CE standards
Multiple U.S. patents pending for design and ventilation
Includes deluxe helmet bag and 2 color-matched Vortex visors
3-year limited warranty

SE3 Helmet Zap Gold Chrome

Mon, 21 May 2012 03:13:18 +0000

New dual density eps foam
New top scoop design
New mouthpiece design and removable nose guard
Quick-release cheek pads for emergency helmet removal
Titanium hardware for reduced weight, durability and style
Indents for communication ear piece
Exceeds Snell M2010, M2005, US DOT, AU and CE standards
Multiple U.S. patents pending for design and ventilation
Includes deluxe helmet bag and 2 color-matched Vortex visors
3-year limited warranty

TROY LEE SE3 MQUEEN HELMET

Mon, 21 May 2012 03:13:18 +0000

New dual density eps foam
New top scoop design
New mouthpiece design and removable nose guard
Quick-release cheek pads for emergency helmet removal
Titanium hardware for reduced weight, durability and style
Indents for communication ear piece
Exceeds Snell M2010, M2005, US DOT, AU and CE standards
Multiple U.S. patents pending for design and ventilation
Includes deluxe helmet bag and 2 color-matched Vortex visors
3-year limited warranty

TROY LEE GP AIR MEDUSA JERSEY

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP AIR BEAST JERSEY

Mon, 21 May 2012 03:13:18 +0000

TROY LEE GP AIR TEAM JERSEY

Mon, 21 May 2012 03:13:18 +0000

TROY LEE SE PISTONBONE JERSEY

Mon, 21 May 2012 03:13:18 +0000

The SE Jersey is constructed using the most technologically advanced materials in performance athletics. Perforated flat-back polyester combined with micro-mesh side panels and sleeves gives you the ultimate combination of durability, ventilation, and style. The state of the art material provides an extraordinary balance between lightweight feel and bullet-proof strength. Using tiny mesh vents, this fabric allows air to reach and cool your core. By helping you stay fresh longer, the SE Jersey is essential to getting the most out of your moto.

TROY LEE SE PRO IMPERIAL JERSEY

Mon, 21 May 2012 03:13:18 +0000

The SE Pro Jersey is constructed using the most technologically advanced materials in performance athletics. Perforated flat-back polyester combined with micro-mesh side panels and sleeves gives you the ultimate combination of durability, ventilation, and style. The state of the art material provides an extraordinary balance between lightweight feel and bullet-proof strength. Using tiny mesh vents, this fabric allows air to reach and cool your core. By helping you stay fresh longer, the SE Pro Jersey is essential to getting the most out of your moto.

TROY LEE SE PRO CORSE JERSEY

Mon, 21 May 2012 03:13:18 +0000

TROY LEE D3 STINGER HELMET

Mon, 21 May 2012 03:13:18 +0000

The next generation of action sports protection, the brand new D3 Helmet is the pinnacle of style and safety. A technologically advanced Carbon Fiber shell and titanium hardware gives the D3 a featherweight feel. 20 high-flow intake and exhaust ports, including a revolutionary injection-molded intake system, combine with new deeper EPS channeling to provide optimal ventilation.

TROY LEE SPEEDWING HELMET

Mon, 21 May 2012 03:13:18 +0000

TROY LEE D3 PALMER HELMET

Mon, 21 May 2012 03:13:18 +0000

TROY LEE D3 ZAP HELMET

Mon, 21 May 2012 03:13:18 +0000

TROY LEE D3 PINSTRIPE HELMET

Mon, 21 May 2012 03:13:18 +0000

TROY LEE D3 PEAT HELMET

Mon, 21 May 2012 03:13:18 +0000

Technologically advanced aerospace carbon/composite shell construction. Includes 2 fully adjustable, graphic matching D3 visors. Machined titanium visor screws for reduced weight. Dual Density Shock Pad System 20 high flow intake and exhaust ports for maximum ventilation

TROY LEE AIR MIDNIGHT HELMET

Mon, 21 May 2012 03:13:18 +0000

High Tech aerospace carbon/composite shell construction. Meets SNELL, US DOT, and EDE standards. Aggressive, hi-flow plastic mouth vent provides increased airflow. Stylized rubber nose guard aids in roost protection. Fully adjustable, graphic matching Vortex visor allows for custom height placement. Machined cross-top aluminum visor screws.

TROY LEE AIR HISTORY HELMET

Mon, 21 May 2012 03:13:18 +0000

TROY LEE AIR MEDUSA HELMET

Mon, 21 May 2012 03:13:18 +0000

TROY LEE AIR WING-IT HELMET

Mon, 21 May 2012 03:13:18 +0000

TROY LEE AIR VOODOO HELMET

Mon, 21 May 2012 03:13:18 +0000

TROY LEE AIR STRIKE HELMET

Mon, 21 May 2012 03:13:18 +0000

High Tech aerospace carbon/composite shell construction. Meets SNELL, US DOT, and EDE standards. Aggressive, hi-flow plastic mouth vent provides increased airflow.

VON ZIPPER GOGGLE SKULL CANDY HEADPHONE COMBO

Mon, 21 May 2012 03:13:18 +0000

Frame Color: Blue
Size: One Size Fits All
Skull Candy SkullCrusher Headphones & Vonzipper Sizzle MX Goggle Bundle w/ Carrying Case Adult
2010 Model

ALPINESTAR MOTOGP 110 LEATHER JACKET

Mon, 21 May 2012 03:13:18 +0000

From the new Alpinestars/Dorna co-branded MotoGP® range, the GP110 leather jacket offers a clean cut, high performance look, with a host of safety and comfort features reflecting the high tech, highly engineered world of MotoGP®. Features:

Constructed using a combination of full grain and perforated leather for the ultimate in strength, durability, abrasion resistance and comfort
Clean cut design lines give the jacket a bold, professional look, whilst stretch Kevlar® panels in the arms provide freedom of movement whilst providing a tight, adaptable fit around the arm and wrist
YKK zippers ensure a tight, secure closure around the wrist
Comfort features include pre curved sleeves for reduced fatigue and improved comfort, while a leather accordion flex zone under the arm and around the waist allows for an adaptable, comfortable fit. Perforated leather on the body and arm provides class leading ventilation, whilst a removable thermal inner liner allows for additional climate control
Alpinestars CE approved armor provides the leather jacket with high levels of protection, with armor located on the shoulder and around the elbow/forearm zone, the jacket provides protection at all the critical areas
Additional protection is available through the use of Alpinestars RC back protector (available as a separate accessory) when inserted into the specially constructed internal compartment

ALPINESTAR GP-R PERFORATED LEATHER JACKET

Mon, 21 May 2012 03:13:18 +0000

Designed to let you feel as cool as you look, the GP-R Perforated Leather Jacket features ventilated inserts in its supple, full-grain leather construction for enhanced airflow. A quality Alpinestars product that will keep you comfortable and safe.

1.3mm full-grain leather provides the optimum combination of durability, comfort and abrasion resistance
Integrated Aramidic stretch panels in the shoulders allow full range of movement for extra comfort and control while riding
Removable and adjustable CE certified Bio Armor protectors in the elbows and shoulders
Chest and back pad compartments with PE protective padding (Alpinestars CE certified Bio Armor back protector insert and Bionic Chest Guards available as accessory upgrade)
Snap connection system allows integration with optional Alpinestars’ CE level 2 certified Bionic Race Back Protector
Internal waist connection zipper allows attachment to selected Alpinestars leather and textile pants
Sizes listed in Euro, see size chart for US conversion

ALPINESTAR GP PRO JACKET

Mon, 21 May 2012 03:13:18 +0000

Premium 1.3mm full-grain leather for optimal abrasion resistance and durability
Aerodynamic, dual density back hump promotes airflow within the suit to improve ventilation
PU external sliders on the shoulders and elbows help reduce the risk of the rider being pitched into a tumble when sliding
Removable CE certified GP elbow and shoulder protectors provide excellent impact protection
Chest and back pad compartments with PE protective padding (Alpinestars back protector insert and chest guards available as accessory upgrade)
Integrated Bionic Race Back Protector snap connection system
Lateral accordion stretch panels across the back assist body movement while on the motorcycle
Accordion stretch panels in the elbows help maintain proper fit and flexibility when in the riding position
Additional stretch panels in the sleeves
Inner mesh lining panel inserts work with outer stretch zones for a snug fit
D-ring waist adjustment affords a tailored fit

ALPINESTAR TECH 1-R JACKET

Mon, 21 May 2012 03:13:18 +0000

Constructed from top grade, full-grain leather and integrating CE certified protection in a sharp design, the Tech 1-R leather jacket is a high-octane performer that will satisfy the most demanding road rider.
1.3 mm top grade leather construction uses extended perforated panels on upper and lower body for improved ventilation.
The MotoGP profile perforated back hump gives outstanding aerodynamic and ventilation performance.
External PU (Polyurethane) shoulder protectors derived from Alpinestars racing program provides class-leading impact and abrasion resistance.
Further protection provided with removable CE certified GP series elbow protectors.

EVS ADULT FLUX ROOST GUARD WHITE

Mon, 21 May 2012 03:13:18 +0000

A roost guard that actually moves WITH you rather than AGAINST you. The FLUX features pivoting and sliding sections that expand & contract as your body moves providing increased comfort & freedom of movement.

EVS ADULT FLUX ROOST GUARD BLACK

Mon, 21 May 2012 03:13:18 +0000

EVS ADULT FLUX ROOST GUARD SMOKE

Mon, 21 May 2012 03:13:18 +0000

EVS ADULT FLUX ROOST GUARD CLEAR/RED

Mon, 21 May 2012 03:13:18 +0000

EVS ADULT FLUX ROOST GUARD CLEAR/BLUE

Mon, 21 May 2012 03:13:18 +0000

EVS ADULT FLUX ROOST GUARD CLEAR/BLACK

Mon, 21 May 2012 03:13:18 +0000

EVS F2 MODULAR ROOST DEFLECTOR

Mon, 21 May 2012 03:13:18 +0000

The EVS F2 roost guard is the next generation in roost deflection technology. Its full modular design allows you to personalize the fitment to suit your needs on the track. + Lightweight ventilated high impact polypropylene construction + Neck brace compatible design offers removable front inserts that allow improved brace comfort

EVS RC1 RACE COLLAR

Mon, 21 May 2012 03:13:18 +0000

Traditional race collar providing protection against common neck & collarbone injuries

EVS RC2 RACE COLLAR BLUE ADULT

Mon, 21 May 2012 03:13:18 +0000

Enhanced race collar providing protection against common neck & collarbone injuries.

EVS RC2 RACE COLLAR RED ADULT

Mon, 21 May 2012 03:13:18 +0000

Enhanced race collar providing protection against common neck & collarbone injuries.

EVS RC2 RACE COLLAR BLACK ADULT

Mon, 21 May 2012 03:13:18 +0000

Enhanced race collar providing protection against common neck & collarbone injuries.

EVS RC2 RACE COLLAR NITRO ADULT

Mon, 21 May 2012 03:13:18 +0000

EVS RC3 RACE COLLAR BLUE ADULT

Mon, 21 May 2012 03:13:18 +0000

Race collar technology providing even greater protection against common neck & collarbone injuries.

EVS RC3 RACE COLLAR RED ADULT

Mon, 21 May 2012 03:13:18 +0000

Race collar technology providing even greater protection against common neck & collarbone injuries.

EVS RC3 RACE COLLAR BLACK ADULT

Mon, 21 May 2012 03:13:18 +0000

Race collar technology providing even greater protection against common neck & collarbone injuries.

EVS RCEVOLUTION RACE COLLAR RED

Mon, 21 May 2012 03:13:18 +0000

The ultimate in neck protection provides protection against axial compression, hyperflexion, hyperextension and lateral hyperflexion. + Disperses impact forces across the body, reducing clavicle injuries + Lightweight, impact absorbing composite chassis + 3-stage adjustable collar for perfect fit

EVS RC EVOLUTION RACE COLLAR BLACK

Mon, 21 May 2012 03:13:18 +0000

EVS RC EVOLUTION RACE COLLAR NITRO

Mon, 21 May 2012 03:13:18 +0000

EVS R4 NECK SUPPORT

Mon, 21 May 2012 03:13:18 +0000

Minimizes risk of axial compression, hyperflexion, hyperextension and lateral hyperflexion + Easy front entry system + Provides amazing range of motion of head + Soft rubberized edges for increased comfort + Fully adjustable sizing + Works with many EVS roost protectors

LEATT GPX OFFROAD TRANSLUCENT CLUB 3 BRACE

Mon, 21 May 2012 03:13:18 +0000

New 2012 brace material – LHIP (Leatt High Impact Polymer)

New clip-on padding

New light weight padding material crosslink

New translucent colours

Adjustable front and rear table height

Low table settings for perfect out-of-the-box fit

LEATT GPX OFFROAD CLUB 3 BRACE

Mon, 21 May 2012 03:13:18 +0000

New 2012 brace material – LHIP (Leatt High Impact Polymer)

New clip-on padding

New light weight padding material crosslink

New translucent colours

Adjustable front and rear table height

Low table settings for perfect out-of-the-box fit

LEATTE GPX OFFROAD PRO NECK BRACE

Mon, 21 May 2012 03:13:18 +0000

State of the art neck brace! • Full carbon brace with Kevlar. • 500g +/- 50g • All aluminium hinges and bracket. • Revolutionary padding design • Vented padding • Vented brace structure • CE approval

DELUXE ALL SEASON COVER

Mon, 21 May 2012 03:13:18 +0000

Made from a water resistant lighter weight UV-treated "Tri-Max®" polyester

Ventilation system minimizes condensation build-up and allows constant air circulation

Snug elastic bottom with one-inch grommets at center and front wheel

Soft windshield liner helps protect against scratching and hazing

Packed into its own attractive matching carry all

Silver heat Resistant lower panels

2 year "No Hassle" warranty

Colors Navy/ Silver (902), Burgundy/Silver (903), and Black / Silver (904)

Sizes to fit every model M / L / XL / XXL

P-12 LIFT MX STAND

Mon, 21 May 2012 03:13:18 +0000

TRI-MOTO STAND

Mon, 21 May 2012 03:13:18 +0000

LIGHT-WEIGHT REPLACEMENT FOR OEM TRIANGLE STANDS THREE AXLE PIN SIZES WITH TAPERED ENDS

ALLOY MX BIKE STAND

Mon, 21 May 2012 03:13:18 +0000

ALUMINUM SILVER FINISH TOP MEASURES 10.5 INCHES BY 10.5 INCHES OIL AND GAS RESISTANT RUBBER TOP LARGE OIL DRAIN HOLE IN TOP BUILT-IN BOTTOM TOOL TRAY 17 INCHES TALL AND WEIGHS ONLY 8 LBS

PRO PANEL MX STAND

Mon, 21 May 2012 03:13:18 +0000

MEASURES 17 INCHES TALL AIRCRAFT ALUMINUM 1 INCH ROUND TUBING ARCHED FRAME FOR STABILITY ON UNEVEN GROUND

MOTOERSPORTS ALUMINUM ARCHED FOLDING RAMP

Mon, 21 May 2012 03:13:18 +0000

Exclusive flat compact design folds in half for easy storage and transportation
Made from durable and lightweight 6063 aluminum
Rubber-coated ramp lip
Weighs only 9.5 lb.
Measures 8 INCHES W x 89 INCHES L
Maximum load capacity of 500 lb.

SOUTHERN MULTI-USE TIEDOWNS

Mon, 21 May 2012 03:13:18 +0000

HIGH QUALITY, ECONOMICALLY PRICED 1 INCH 2700 IB TEST NYLON WEBBING VINYL COATED HOOK

POWERTYE WITH SOFT-TYE AND SECURE HOOK

Mon, 21 May 2012 03:13:18 +0000

Features sewn in Soft-Tye and locking secure hooks
4,500lb test nylon webbing
3/8" heavy duty vinyl coated hooks
Powertye EZ release, nonslipping teardrop buckle
1,200lb assembly strength
Hand loop for pulling tight
5-1/2' in length plus Soft-Tye length
Double security stitching
Sold in pairs

POWERTYE 1 INCH SOFT-TYES 18 INCHES

Mon, 21 May 2012 03:13:18 +0000

4,500 lb. test nylon webbing

Double Security Stitching

400 lb. rated assembly

Sold in pairs

POWERTYE 1 INCH SOFT-TYES 12 INCHES

Mon, 21 May 2012 03:13:18 +0000

4,500 lb. test nylon webbing

Double Security Stitching

400 lb. rated assembly

Sold in pairs

CANYON DANCER HANDLEBAR HARNESS

Mon, 21 May 2012 03:13:18 +0000

A hassle-free way to secure motorcycles

Virtually eliminates possibility of damage to bodywork

Simple, quick and very easy to use - mounts on the grips and keeps tie-downs away from the bodywork

Nylon webbing has tensile strength of over 5500 lbs.

Best solution when using tie-downs on sport bikes

Can be used on wide variety of motorcycle

FOX SMALL AIRFRAME CHEST PROTECTOR

Mon, 21 May 2012 03:13:18 +0000

Full-coverage meets comfort in our classic Fox Small/Youth Airframe Roost Deflector, a favorite choice among safety–conscious racers looking for top-of-the-line shoulder protection, complete rib wrapping and advanced durability.
DESIGN & FUNCTION
Shock-resistant Lexan® panels for complete roost coverage
Lycra® lined bio-foam gives natural movement without hindrance
Fully adjustable and removable arm guards
Kevlar® reinforced Torsion Hinge with two-piece rear panel

FOX XL AIRFRAME CHEST PROTECTOR

Mon, 21 May 2012 03:13:18 +0000

Full-coverage meets comfort in our classic Fox Small/Youth Airframe Roost Deflector, a favorite choice among safety–conscious racers looking for top-of-the-line shoulder protection, complete rib wrapping and advanced durability.
DESIGN & FUNCTION
Shock-resistant Lexan® panels for complete roost coverage
Lycra® lined bio-foam gives natural movement without hindrance
Fully adjustable and removable arm guards
Kevlar® reinforced Torsion Hinge with two-piece rear panel

FOX LARGE AIRFRAME CHEST PROTECTOR

Mon, 21 May 2012 03:13:18 +0000

Full-coverage meets comfort in our classic Fox Small/Youth Airframe Roost Deflector, a favorite choice among safety–conscious racers looking for top-of-the-line shoulder protection, complete rib wrapping and advanced durability.
DESIGN & FUNCTION
Shock-resistant Lexan® panels for complete roost coverage
Lycra® lined bio-foam gives natural movement without hindrance
Fully adjustable and removable arm guards
Kevlar® reinforced Torsion Hinge with two-piece rear panel

FOX MEDIUM AIRFRAME CHEST PROTECTOR

Mon, 21 May 2012 03:13:18 +0000

Full-coverage meets comfort in our classic Fox Small/Youth Airframe Roost Deflector, a favorite choice among safety–conscious racers looking for top-of-the-line shoulder protection, complete rib wrapping and advanced durability.
DESIGN & FUNCTION
Shock-resistant Lexan® panels for complete roost coverage
Lycra® lined bio-foam gives natural movement without hindrance
Fully adjustable and removable arm guards
Kevlar® reinforced Torsion Hinge with two-piece rear panel

ANCRA THE ORIGINALS

Mon, 21 May 2012 03:13:18 +0000

The Original tiedown set the standard, is 5-1/2' long, constructed of abrasion resistant nylon webbing, with premium heavy duty 1' cam buckle with zinc cam and pressure plate to reduce webbing abrasion and vinyl coated hooks. 1,200 lbs. assembly strength and 400 lbs working load limit. The tiedown of choice for larger motorcycles. Available in red, black, lime green, turquoise, orange, olive drab and blue webbinb colors. Packaged in pair.

KEEPER 5-S DISC LOCK

Mon, 21 May 2012 03:13:18 +0000

Dual-reinforced, high security, disc-style cylinder
5mm pin diameter fits smaller vent holes
2 high security, "I" keys
Compact, lightweight and weatherproof

FOX SMALL RACEFRAME

Mon, 21 May 2012 03:13:18 +0000

7 Flex technology and custom attack position ergonomics meld the Fox Small/Youth Raceframe Roost Deflector with form-fitting construction and long-lasting materials for the ultimate in race-inspired fit, comfort and style.
DESIGN & FUNCTION
7-way co-molded chest and back plates for incredible rider contour and comfort
Lycra® lined bio-foam gives natural movement without hindrance
Superior coverage in vital areas
Integrated buckles provide quick adjustment and removal

FOX MEDIUM RACEFRAME

Mon, 21 May 2012 03:13:18 +0000

7 Flex technology and custom attack position ergonomics meld the Fox Small/Youth Raceframe Roost Deflector with form-fitting construction and long-lasting materials for the ultimate in race-inspired fit, comfort and style.
DESIGN & FUNCTION
7-way co-molded chest and back plates for incredible rider contour and comfort
Lycra® lined bio-foam gives natural movement without hindrance
Superior coverage in vital areas
Integrated buckles provide quick adjustment and removal

FOX LARGE RACEFRAME

Mon, 21 May 2012 03:13:18 +0000

7 Flex technology and custom attack position ergonomics meld the Fox Small/Youth Raceframe Roost Deflector with form-fitting construction and long-lasting materials for the ultimate in race-inspired fit, comfort and style.
DESIGN & FUNCTION
7-way co-molded chest and back plates for incredible rider contour and comfort
Lycra® lined bio-foam gives natural movement without hindrance
Superior coverage in vital areas
Integrated buckles provide quick adjustment and removal

FOX PROFRAME LC ROCKSTAR ROOST DEFLECTOR

Mon, 21 May 2012 03:13:18 +0000

Slim and sleek full body coverage is the Fox Proframe LC Future's game. The Proframe is the only roost guard of its type that is 100% neck support compatible and quickly adjustable to fit all body types. The low profile fit, Raceframe-inspired integrated buckle system and removable back-panel add to an impressive list of Proframe perks.
DESIGN & FUNCTION
Low profile neck brace compatible roost deflector
Adjustable shoulder straps for a precise fit with or without neck brace.
Easy to use buckle system integrated into chest plate
Removable back plate allows rider to wear as chest plate only
2 position adjustable back plate for a precise fit
Soft Biofoam chassis against body for a comfortable fit

HARD WIRE INTEGRATED CABLE AND LOCK 20MM

Mon, 21 May 2012 03:13:18 +0000

20mm braided steel cable provides increased cut resistance
New, reinforced lock head construction with our "TALON" lock pin retention system, which provides extra holding power
New, high security disc-style cylinder with anti-drill guard and more than 1 million key variations
Lock head rotates 360 degrees for easier handling during lock up and removal
Dual sliding cylinder weather guards with automatic close feature
Weather proof vinyl skin protects bike and powersport vehicle surfaces
2 keys - high security "I" keys

HARD WIRE INTEGRATED CABLE AND LOCK 15MM

Mon, 21 May 2012 03:13:18 +0000

15mm braided steel cable provides increased cut resistance
New, reinforced lock head construction with our "TALON" lock pin retention system, which provides extra holding power
New, high security disc-style cylinder with anti-drill guard and more than 1 million key variations
Lock head rotates 360 degrees for easier handling during lock up and removal
Dual sliding cylinder weather guards with automatic close feature
Weather proof vinyl skin protects bike and powersport vehicle surfaces
2 keys - high security "I" keys

FOX PROFRAME LC FUTURE ROOST DEFLECTOR

Mon, 21 May 2012 03:13:18 +0000

Slim and sleek full body coverage is the Fox Proframe LC Future's game. The Proframe is the only roost guard of its type that is 100% neck support compatible and quickly adjustable to fit all body types. The low profile fit, Raceframe-inspired integrated buckle system and removable back-panel add to an impressive list of Proframe perks.
DESIGN & FUNCTION
Low profile neck brace compatible roost deflector
Adjustable shoulder straps for a precise fit with or without neck brace.
Easy to use buckle system integrated into chest plate
Removable back plate allows rider to wear as chest plate only
2 position adjustable back plate for a precise fit
Soft Biofoam chassis against body for a comfortable fit

FOX PROFRAME LC IN THE DARK ROOST DEFLECTOR

Mon, 21 May 2012 03:13:18 +0000

Slim and sleek full body coverage is the Fox Proframe LC Future's game. The Proframe is the only roost guard of its type that is 100% neck support compatible and quickly adjustable to fit all body types. The low profile fit, Raceframe-inspired integrated buckle system and removable back-panel add to an impressive list of Proframe perks.
DESIGN & FUNCTION
Low profile neck brace compatible roost deflector
Adjustable shoulder straps for a precise fit with or without neck brace.
Easy to use buckle system integrated into chest plate
Removable back plate allows rider to wear as chest plate only
2 position adjustable back plate for a precise fit
Soft Biofoam chassis against body for a comfortable fit

KRYPTOFLEX STEELCABLES 7 FOOT

Mon, 21 May 2012 03:13:18 +0000

10mm braided steel cable provides increased cut resistance
Double looped cable for use with all Kryptonite U-locks, disc locks and padlocks
Protective vinyl cover

KRYPTOFLEX STEELCABLES 4 FOOT

Mon, 21 May 2012 03:13:18 +0000

10mm braided steel cable provides increased cut resistance
Double looped cable for use with all Kryptonite U-locks, disc locks and padlocks
Protective vinyl cover

NEW YORK FAHGETTABOUDIT LOCK

Mon, 21 May 2012 03:13:18 +0000

18mm hardened MAX-Performance steel shackle resists bolt cutters and leverage attacks
Oversized hardened steel sleeve over crossbar for double security
Double deadbolt locking for extensive holding power
High security disc-style cylinder
Center keyway defends against leverage attacks
Protective vinyl coating
Sliding dustcover protects and extends cylinder life
3 keys - one lighted with high intensity bulb & replaceable battery

KRYPTOLOK SERIES 2 DISC LOCK

Mon, 21 May 2012 03:13:18 +0000

13mm hardened Performance steel shackle
High security, disc-style cylinder
Reinforced sleeve over crossbar and cylinder for additional security
Rotating dustcover protects cylinder
Reinforced cuff over crossbar and cylinder for added security
2 high security, "I" keys

NEW YORK DISC LOCK

Mon, 21 May 2012 03:13:18 +0000

14mm hardened MAX-Performance steel shackle resists bolt cutters and leverage attacks
High security, disc-style cylinder
Double deadbolt locking for extensive holding power
Dual layer steel crossbar for maximum security
Sliding dust cover protects and extends cylinder life
Includes carrying pouch and disc lock reminder
3 keys - one lighted with high intensity bulb & replaceable battery

EVOLUTION SERIES 4 DISC LOCK

Mon, 21 May 2012 03:13:18 +0000

New oval design! Motorcycle & scooter locks for high risk areas

14mm hardened MAX-Performance steel shackle resists cutting and leverage attacks
Double deadbolt locking mechanism has extensive holding power
New higher security, disc-style cylinder with more than a million key variations
Reinforced anti-drill/pull cylinder protection system
Sliding dust cover protects and extends cylinder life
3 keys - one lighted with high intensity bulb & replaceable battery

KRYPTO DFS 10 DISC LOCK

Mon, 21 May 2012 03:13:18 +0000

Stapler style disc lock with 10mm pin diameter for increased theft protection
Hardened drop forged steel resists cutting, sawing, freezing and chisel attacks
New, dual-reinforced, high security, disc-style cylinder
2 high security, "I" keys
Includes pouch with belt clip for easier transporting

NEW YORK LOCK MC

Mon, 21 May 2012 03:13:18 +0000

16MM HARDENED STEEL SHACKLE. 4" X 10.25" OPENING. VINYL COATING PREVENTS SCRATCHES. THIRD LIGHTED KEY INCLUDED. 1,000 ANTI- THEFT OFFER

KRYPTOFLEX FLEXIBLE CABLE AND PADLOCK

Mon, 21 May 2012 03:13:18 +0000

8mm self-coiling, flexible twisted steel cable
Double looped cable with key padlock
Padlock features double deadbolt locking with hardened steel shackle
Deterrent security for low crime areas

NEW YORK FAHGETTABOUDIT 60 INCH LOCK

Mon, 21 May 2012 03:13:18 +0000

For extreme security needs in high crime areas

NEW YORK FAHGETTABOUDIT 39 INCH LOCK

Mon, 21 May 2012 03:13:18 +0000

For extreme security needs in high crime areas

NEW YORK CHAIN 66 INCH LOCK

Mon, 21 May 2012 03:13:18 +0000

A high security lock with innovative oval crossbar disc lock, designed to defeat thieves' maximum attacks

NEW YORK CHAIN 39 INCH LOCK

Mon, 21 May 2012 03:13:18 +0000

A high security lock with innovative oval crossbar disc lock, designed to defeat thieves' maximum attacks

NEW YORK LEGEND CHAIN 1515

Mon, 21 May 2012 03:13:18 +0000

Our highest security lock features an armored disc lock, designed for ultimate security in the highest crime areas.

FLY RACING TREKKER HELMET SILVER

Mon, 21 May 2012 03:13:18 +0000

DOT AND ECE 22/05 APPROVED - meets or exceeds DOT and ECE 22/05 helmet standards
ADVANCED POLY ALLOY SHELL CONSTRUCTION - combines high-strength poly materials to create an aggressive design that is durable and lightweight
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
UNIQUE VISOR SHAPE - allows for use of goggles when the shield is in the open or closed position
MULTI-POSITION, RATCHETING FACE SHIELD – allows for quick opening or closing while wearing riding gloves
REMOVABLE AND WASHABLE COMFORT LINER AND CHEEK PADS - help keep the interior of your helmet clean and fresh and is easy to use with our “Quick Snap” system
ADJUSTABLE INTAKE AND EXHAUST VENTS - sixteen (16) total vents (eight intake, eight exhaust) circulate a large volume of airflow to help keep your head cool. Adjustable vents include: one mouthpiece, two brow, and two rear
VENTS ARE STAINLESS STEEL MESH REINFORCED.
OPTIONAL VISOR ELIMINATOR KIT AVAILABLE – allows you to remove the visor while retaining all the features of the shield

FLY RACING TREKKER HELMET HI-VIZ

Mon, 21 May 2012 03:13:18 +0000

DOT AND ECE 22/05 APPROVED - meets or exceeds DOT and ECE 22/05 helmet standards
ADVANCED POLY ALLOY SHELL CONSTRUCTION - combines high-strength poly materials to create an aggressive design that is durable and lightweight
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
UNIQUE VISOR SHAPE - allows for use of goggles when the shield is in the open or closed position
MULTI-POSITION, RATCHETING FACE SHIELD – allows for quick opening or closing while wearing riding gloves
REMOVABLE AND WASHABLE COMFORT LINER AND CHEEK PADS - help keep the interior of your helmet clean and fresh and is easy to use with our “Quick Snap” system
ADJUSTABLE INTAKE AND EXHAUST VENTS - sixteen (16) total vents (eight intake, eight exhaust) circulate a large volume of airflow to help keep your head cool. Adjustable vents include: one mouthpiece, two brow, and two rear
VENTS ARE STAINLESS STEEL MESH REINFORCED.
OPTIONAL VISOR ELIMINATOR KIT AVAILABLE – allows you to remove the visor while retaining all the features of the shield

FLY RACING TREKKER HELMET MATTE BLACK

Mon, 21 May 2012 03:13:18 +0000

DOT AND ECE 22/05 APPROVED - meets or exceeds DOT and ECE 22/05 helmet standards
ADVANCED POLY ALLOY SHELL CONSTRUCTION - combines high-strength poly materials to create an aggressive design that is durable and lightweight
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
UNIQUE VISOR SHAPE - allows for use of goggles when the shield is in the open or closed position
MULTI-POSITION, RATCHETING FACE SHIELD – allows for quick opening or closing while wearing riding gloves
REMOVABLE AND WASHABLE COMFORT LINER AND CHEEK PADS - help keep the interior of your helmet clean and fresh and is easy to use with our “Quick Snap” system
ADJUSTABLE INTAKE AND EXHAUST VENTS - sixteen (16) total vents (eight intake, eight exhaust) circulate a large volume of airflow to help keep your head cool. Adjustable vents include: one mouthpiece, two brow, and two rear
VENTS ARE STAINLESS STEEL MESH REINFORCED.
OPTIONAL VISOR ELIMINATOR KIT AVAILABLE – allows you to remove the visor while retaining all the features of the shield

FLY RACING TREKKER HELMET WHITE

Mon, 21 May 2012 03:13:18 +0000

DOT AND ECE 22/05 APPROVED - meets or exceeds DOT and ECE 22/05 helmet standards
ADVANCED POLY ALLOY SHELL CONSTRUCTION - combines high-strength poly materials to create an aggressive design that is durable and lightweight
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
UNIQUE VISOR SHAPE - allows for use of goggles when the shield is in the open or closed position
MULTI-POSITION, RATCHETING FACE SHIELD – allows for quick opening or closing while wearing riding gloves
REMOVABLE AND WASHABLE COMFORT LINER AND CHEEK PADS - help keep the interior of your helmet clean and fresh and is easy to use with our “Quick Snap” system
ADJUSTABLE INTAKE AND EXHAUST VENTS - sixteen (16) total vents (eight intake, eight exhaust) circulate a large volume of airflow to help keep your head cool. Adjustable vents include: one mouthpiece, two brow, and two rear
VENTS ARE STAINLESS STEEL MESH REINFORCED.
OPTIONAL VISOR ELIMINATOR KIT AVAILABLE – allows you to remove the visor while retaining all the features of the shield

FLY RACING TREKKER HELMET BLACK

Mon, 21 May 2012 03:13:18 +0000

DOT AND ECE 22/05 APPROVED - meets or exceeds DOT and ECE 22/05 helmet standards
ADVANCED POLY ALLOY SHELL CONSTRUCTION - combines high-strength poly materials to create an aggressive design that is durable and lightweight
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
UNIQUE VISOR SHAPE - allows for use of goggles when the shield is in the open or closed position
MULTI-POSITION, RATCHETING FACE SHIELD – allows for quick opening or closing while wearing riding gloves
REMOVABLE AND WASHABLE COMFORT LINER AND CHEEK PADS - help keep the interior of your helmet clean and fresh and is easy to use with our “Quick Snap” system
ADJUSTABLE INTAKE AND EXHAUST VENTS - sixteen (16) total vents (eight intake, eight exhaust) circulate a large volume of airflow to help keep your head cool. Adjustable vents include: one mouthpiece, two brow, and two rear
VENTS ARE STAINLESS STEEL MESH REINFORCED.
OPTIONAL VISOR ELIMINATOR KIT AVAILABLE – allows you to remove the visor while retaining all the features of the shield

FLY RACING KINETIC PRO SHORT HELMET BLUE/YELLOW HELMET

Mon, 21 May 2012 03:13:18 +0000

DOT AND ECE APPROVED FOR USA - other standards include AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
QUICK SNAP REMOVABLE LINER & CHEEK PADS - keep you looking clean and help extend the life of your helmet
PLUSH EMBOSSED PATTERN LINER – for that added touch of comfort and style
ALUMINUM VISOR HARDWARE – helps make the Kinetic Pro even lighter
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY RACING KINETIC PRO CANARD HELMET ORANGE

Mon, 21 May 2012 03:13:18 +0000

DOT AND ECE APPROVED FOR USA - other standards include AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
QUICK SNAP REMOVABLE LINER & CHEEK PADS - keep you looking clean and help extend the life of your helmet
PLUSH EMBOSSED PATTERN LINER – for that added touch of comfort and style
ALUMINUM VISOR HARDWARE – helps make the Kinetic Pro even lighter
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY RACING KINETIC PRO CANARD HELMET RED

Mon, 21 May 2012 03:13:19 +0000

DOT AND ECE APPROVED FOR USA - other standards include AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
QUICK SNAP REMOVABLE LINER & CHEEK PADS - keep you looking clean and help extend the life of your helmet
PLUSH EMBOSSED PATTERN LINER – for that added touch of comfort and style
ALUMINUM VISOR HARDWARE – helps make the Kinetic Pro even lighter
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY RACING FLASH HELMET RED/BLACK/WHITE

Mon, 21 May 2012 03:13:19 +0000

DOT APPROVED FOR USA - other standards include ECE (Europe) and AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
REMOVABLE LINER & CHEEK PADS - keep you looking clean, help extend the life of your helmet and is easy to use with our “Quick Snap” system
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY RACING FLASH HELMET YELLOW/BLUE

Mon, 21 May 2012 03:13:19 +0000

DOT APPROVED FOR USA - other standards include ECE (Europe) and AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
REMOVABLE LINER & CHEEK PADS - keep you looking clean, help extend the life of your helmet and is easy to use with our “Quick Snap” system
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY RACING FLASH HELMET PINK/GREY

Mon, 21 May 2012 03:13:19 +0000

DOT APPROVED FOR USA - other standards include ECE (Europe) and AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
REMOVABLE LINER & CHEEK PADS - keep you looking clean, help extend the life of your helmet and is easy to use with our “Quick Snap” system
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY RACING FLASH HELMET PURPLE/YELLOW

Mon, 21 May 2012 03:13:19 +0000

DOT APPROVED FOR USA - other standards include ECE (Europe) and AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
REMOVABLE LINER & CHEEK PADS - keep you looking clean, help extend the life of your helmet and is easy to use with our “Quick Snap” system
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY KINETIC FLASH HELMET BLACK

Mon, 21 May 2012 03:13:19 +0000

DOT APPROVED FOR USA - other standards include ECE (Europe) and AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
REMOVABLE LINER & CHEEK PADS - keep you looking clean, help extend the life of your helmet and is easy to use with our “Quick Snap” system
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY KINETIC FLASH HELMET GREEN

Mon, 21 May 2012 03:13:19 +0000

DOT APPROVED FOR USA - other standards include ECE (Europe) and AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
REMOVABLE LINER & CHEEK PADS - keep you looking clean, help extend the life of your helmet and is easy to use with our “Quick Snap” system
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY KINETIC FLASH HELMET BLUE

Mon, 21 May 2012 03:13:19 +0000

DOT APPROVED FOR USA - other standards include ECE (Europe) and AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
REMOVABLE LINER & CHEEK PADS - keep you looking clean, help extend the life of your helmet and is easy to use with our “Quick Snap” system
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY RACING KINETIC DASH HELMET WHITE/SILVER

Mon, 21 May 2012 03:13:19 +0000

DOT APPROVED FOR USA - other standards include ECE (Europe) and AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
REMOVABLE LINER & CHEEK PADS - keep you looking clean, help extend the life of your helmet and is easy to use with our “Quick Snap” system
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY RACING KINETIC DASH HELMET BLACK/SILVER

Mon, 21 May 2012 03:13:19 +0000

DOT APPROVED FOR USA - other standards include ECE (Europe) and AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
REMOVABLE LINER & CHEEK PADS - keep you looking clean, help extend the life of your helmet and is easy to use with our “Quick Snap” system
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY RACING KINETIC DASH HELMET BLUE/ORANGE

Mon, 21 May 2012 03:13:19 +0000

DOT APPROVED FOR USA - other standards include ECE (Europe) and AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
REMOVABLE LINER & CHEEK PADS - keep you looking clean, help extend the life of your helmet and is easy to use with our “Quick Snap” system
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY RACING KINETIC DASH HELMET RED

Mon, 21 May 2012 03:13:19 +0000

DOT APPROVED FOR USA - other standards include ECE (Europe) and AS (Australian). Meets or exceeds all the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
REMOVABLE LINER & CHEEK PADS - keep you looking clean, help extend the life of your helmet and is easy to use with our “Quick Snap” system
HIGH VOLUME VENTS – ten (10) massive vents aligned with EPS (Expanded Polystyrene) channels flow a huge volume of air through the helmet keeping you cooled. Large exhaust vents eliminate heat that builds up
HI-FLOW MOUTHPIECE - designed with a cool style and plenty of air flow

FLY RACING TROPHY HELMET RETRO

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
HIGH VOLUME VENTS – six (6) intake and seven (7) exhaust vents help keep you cool by providing massive airflow and ventilation
QUICK SNAP REMOVABLE WASHABLE LINER & CHEEK PADS - keep you looking clean and help extend the life of your helmet
HI-FLOW MOUTHPIECE - stylized to look tough and maintain massive airflow
UV HARDENED FINISH - clear coat is hardened with a high tech UV system. This flash-cures the paint giving it the strongest surface possible

FLY RACING TROPHY HELMET GREEN

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
HIGH VOLUME VENTS – six (6) intake and seven (7) exhaust vents help keep you cool by providing massive airflow and ventilation
QUICK SNAP REMOVABLE WASHABLE LINER & CHEEK PADS - keep you looking clean and help extend the life of your helmet
HI-FLOW MOUTHPIECE - stylized to look tough and maintain massive airflow
UV HARDENED FINISH - clear coat is hardened with a high tech UV system. This flash-cures the paint giving it the strongest surface possible

FLY RACING TROPHY HELMET RED

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
HIGH VOLUME VENTS – six (6) intake and seven (7) exhaust vents help keep you cool by providing massive airflow and ventilation
QUICK SNAP REMOVABLE WASHABLE LINER & CHEEK PADS - keep you looking clean and help extend the life of your helmet
HI-FLOW MOUTHPIECE - stylized to look tough and maintain massive airflow
UV HARDENED FINISH - clear coat is hardened with a high tech UV system. This flash-cures the paint giving it the strongest surface possible

FLY RACING TROPHY HELMET BLUE

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
HIGH VOLUME VENTS – six (6) intake and seven (7) exhaust vents help keep you cool by providing massive airflow and ventilation
QUICK SNAP REMOVABLE WASHABLE LINER & CHEEK PADS - keep you looking clean and help extend the life of your helmet
HI-FLOW MOUTHPIECE - stylized to look tough and maintain massive airflow
UV HARDENED FINISH - clear coat is hardened with a high tech UV system. This flash-cures the paint giving it the strongest surface possible

FLY RACING TROPHY HELMET BLACK

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market
POLY ALLOY SHELL - combination of high strength poly materials create a durable light weight shell
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption
HIGH VOLUME VENTS – six (6) intake and seven (7) exhaust vents help keep you cool by providing massive airflow and ventilation
QUICK SNAP REMOVABLE WASHABLE LINER & CHEEK PADS - keep you looking clean and help extend the life of your helmet
HI-FLOW MOUTHPIECE - stylized to look tough and maintain massive airflow
UV HARDENED FINISH - clear coat is hardened with a high tech UV system. This flash-cures the paint giving it the strongest surface possible

FLY RACING CARBON DRAGON HELMET LTD

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market
COMPOSITE CONSTRUCTION SHELL – outer shell is constructed using state-of-the-art, aircraft grade woven carbon fiber and Kevlar® composite materials, which creates superior strength while remaining extremely light
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact
MULTI-PORT AIR INDUCTION COOLING SYSTEM – eleven (11) intake and four (4) exhaust vents create massive airflow to keep your head cool
TRI-VENT GOGGLE ANTI-FOG VENTS – three (3) air intake vents above goggle eye port draw air from goggle to help clear away fog
FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM - EPS (Expanded Polystyrene) and comfort liner align to maximize airflow
QUICK RELEASE WASHABLE COMFORT LINER & CHEEK PADS – plush liner absorbs sweat, provides plenty of ventilation, and is easy to remove and clean with out “Quick Snap” system
CUSTOM MOLDED RUBBER TRIM WITH NOSE GUARD - with its smooth lines the integrated nose guard helps keep pesky rocks away from your nose
LIGHTWEIGHT ALUMINUM HARDWARE – helmet is constructed using super-strong, lightweight machined aluminum screws, rivets, and D-rings for superior strength and years of worry free use
OPTIONAL CARBON FIBER INTAKE VENT WING – can be added to the helmet for increased direction of airflow on the front vents

FLY RACING SYSTEMATIC HELMET CARMEL/BROWN

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market
COMPOSITE CONSTRUCTION SHELL – outer shell is constructed using state-of-the-art, aircraft grade woven carbon fiber and Kevlar® composite materials, which creates superior strength while remaining extremely light
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact
MULTI-PORT AIR INDUCTION COOLING SYSTEM – eleven (11) intake and four (4) exhaust vents create massive airflow to keep your head cool
TRI-VENT GOGGLE ANTI-FOG VENTS – three (3) air intake vents above goggle eye port draw air from goggle to help clear away fog
FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM - EPS (Expanded Polystyrene) and comfort liner align to maximize airflow
QUICK RELEASE WASHABLE COMFORT LINER & CHEEK PADS – plush liner absorbs sweat, provides plenty of ventilation, and is easy to remove and clean with out “Quick Snap” system
CUSTOM MOLDED RUBBER TRIM WITH NOSE GUARD - with its smooth lines the integrated nose guard helps keep pesky rocks away from your nose
LIGHTWEIGHT ALUMINUM HARDWARE – helmet is constructed using super-strong, lightweight machined aluminum screws, rivets, and D-rings for superior strength and years of worry free use
OPTIONAL CARBON FIBER INTAKE VENT WING – can be added to the helmet for increased direction of airflow on the front vents

FLY RACING F2 CARBON SYSTEMATIC HELMET YELLOW/BLUE/RED

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market
COMPOSITE CONSTRUCTION SHELL – outer shell is constructed using state-of-the-art, aircraft grade woven carbon fiber and Kevlar® composite materials, which creates superior strength while remaining extremely light
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact
MULTI-PORT AIR INDUCTION COOLING SYSTEM – eleven (11) intake and four (4) exhaust vents create massive airflow to keep your head cool
TRI-VENT GOGGLE ANTI-FOG VENTS – three (3) air intake vents above goggle eye port draw air from goggle to help clear away fog
FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM - EPS (Expanded Polystyrene) and comfort liner align to maximize airflow
QUICK RELEASE WASHABLE COMFORT LINER & CHEEK PADS – plush liner absorbs sweat, provides plenty of ventilation, and is easy to remove and clean with out “Quick Snap” system
CUSTOM MOLDED RUBBER TRIM WITH NOSE GUARD - with its smooth lines the integrated nose guard helps keep pesky rocks away from your nose
LIGHTWEIGHT ALUMINUM HARDWARE – helmet is constructed using super-strong, lightweight machined aluminum screws, rivets, and D-rings for superior strength and years of worry free use
OPTIONAL CARBON FIBER INTAKE VENT WING – can be added to the helmet for increased direction of airflow on the front vents

FLY RACING F2 CARBON SYSTEMATIC HELMET PURPLE

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market
COMPOSITE CONSTRUCTION SHELL – outer shell is constructed using state-of-the-art, aircraft grade woven carbon fiber and Kevlar® composite materials, which creates superior strength while remaining extremely light
DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact
MULTI-PORT AIR INDUCTION COOLING SYSTEM – eleven (11) intake and four (4) exhaust vents create massive airflow to keep your head cool
TRI-VENT GOGGLE ANTI-FOG VENTS – three (3) air intake vents above goggle eye port draw air from goggle to help clear away fog
FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM - EPS (Expanded Polystyrene) and comfort liner align to maximize airflow
QUICK RELEASE WASHABLE COMFORT LINER & CHEEK PADS – plush liner absorbs sweat, provides plenty of ventilation, and is easy to remove and clean with out “Quick Snap” system
CUSTOM MOLDED RUBBER TRIM WITH NOSE GUARD - with its smooth lines the integrated nose guard helps keep pesky rocks away from your nose
LIGHTWEIGHT ALUMINUM HARDWARE – helmet is constructed using super-strong, lightweight machined aluminum screws, rivets, and D-rings for superior strength and years of worry free use
OPTIONAL CARBON FIBER INTAKE VENT WING – can be added to the helmet for increased direction of airflow on the front vents

FLY RACING F2 SHORT REPLICA HELMET GREY/BLACK

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market

COMPOSITE CONSTRUCTION SHELL – outer shell is constructed using state-of-the-art, aircraft grade woven carbon fiber and Kevlar® composite materials, which creates superior strength while remaining extremely light

DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact

MULTI-PORT AIR INDUCTION COOLING SYSTEM – eleven (11) intake and four (4) exhaust vents create massive airflow to keep your head cool

TRI-VENT GOGGLE ANTI-FOG VENTS – three (3) air intake vents above goggle eye port draw air from goggle to help clear away fog

FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM - EPS (Expanded Polystyrene) and comfort liner align to maximize airflow

QUICK RELEASE WASHABLE COMFORT LINER & CHEEK PADS – plush liner absorbs sweat, provides plenty of ventilation, and is easy to remove and clean with out “Quick Snap” system

CUSTOM MOLDED RUBBER TRIM WITH NOSE GUARD - with its smooth lines the integrated nose guard helps keep pesky rocks away from your nose

FLY RACING F2 SHORT REPLICA HELMET YELLOW

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market

DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact

MULTI-PORT AIR INDUCTION COOLING SYSTEM – eleven (11) intake and four (4) exhaust vents create massive airflow to keep your head cool

TRI-VENT GOGGLE ANTI-FOG VENTS – three (3) air intake vents above goggle eye port draw air from goggle to help clear away fog

FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM - EPS (Expanded Polystyrene) and comfort liner align to maximize airflow

QUICK RELEASE WASHABLE COMFORT LINER & CHEEK PADS – plush liner absorbs sweat, provides plenty of ventilation, and is easy to remove and clean with out “Quick Snap” system

CUSTOM MOLDED RUBBER TRIM WITH NOSE GUARD - with its smooth lines the integrated nose guard helps keep pesky rocks away from your nose

FLY RACING F2 CANARD REPLICA HELMET BLUE/WHITE

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market

DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact

MULTI-PORT AIR INDUCTION COOLING SYSTEM – eleven (11) intake and four (4) exhaust vents create massive airflow to keep your head cool

TRI-VENT GOGGLE ANTI-FOG VENTS – three (3) air intake vents above goggle eye port draw air from goggle to help clear away fog

FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM - EPS (Expanded Polystyrene) and comfort liner align to maximize airflow

QUICK RELEASE WASHABLE COMFORT LINER & CHEEK PADS – plush liner absorbs sweat, provides plenty of ventilation, and is easy to remove and clean with out “Quick Snap” system

CUSTOM MOLDED RUBBER TRIM WITH NOSE GUARD - with its smooth lines the integrated nose guard helps keep pesky rocks away from your nose

FLY RACING F2 CANARD REPLICA HELMET ORANGE

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market

DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact

MULTI-PORT AIR INDUCTION COOLING SYSTEM – eleven (11) intake and four (4) exhaust vents create massive airflow to keep your head cool

TRI-VENT GOGGLE ANTI-FOG VENTS – three (3) air intake vents above goggle eye port draw air from goggle to help clear away fog

FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM - EPS (Expanded Polystyrene) and comfort liner align to maximize airflow

QUICK RELEASE WASHABLE COMFORT LINER & CHEEK PADS – plush liner absorbs sweat, provides plenty of ventilation, and is easy to remove and clean with out “Quick Snap” system

CUSTOM MOLDED RUBBER TRIM WITH NOSE GUARD - with its smooth lines the integrated nose guard helps keep pesky rocks away from your nose

FLY RACING F2 REPLICA HELMET ORANGE/BLUE/YELLOW

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market

DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact

MULTI-PORT AIR INDUCTION COOLING SYSTEM – eleven (11) intake and four (4) exhaust vents create massive airflow to keep your head cool

TRI-VENT GOGGLE ANTI-FOG VENTS – three (3) air intake vents above goggle eye port draw air from goggle to help clear away fog

FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM - EPS (Expanded Polystyrene) and comfort liner align to maximize airflow

QUICK RELEASE WASHABLE COMFORT LINER & CHEEK PADS – plush liner absorbs sweat, provides plenty of ventilation, and is easy to remove and clean with out “Quick Snap” system

CUSTOM MOLDED RUBBER TRIM WITH NOSE GUARD - with its smooth lines the integrated nose guard helps keep pesky rocks away from your nose

FLY RACING F2 REPLICA HELMET RED/BLACK

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market

DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact

MULTI-PORT AIR INDUCTION COOLING SYSTEM – eleven (11) intake and four (4) exhaust vents create massive airflow to keep your head cool

TRI-VENT GOGGLE ANTI-FOG VENTS – three (3) air intake vents above goggle eye port draw air from goggle to help clear away fog

FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM - EPS (Expanded Polystyrene) and comfort liner align to maximize airflow

QUICK RELEASE WASHABLE COMFORT LINER & CHEEK PADS – plush liner absorbs sweat, provides plenty of ventilation, and is easy to remove and clean with out “Quick Snap” system

CUSTOM MOLDED RUBBER TRIM WITH NOSE GUARD - with its smooth lines the integrated nose guard helps keep pesky rocks away from your nose

FLY RACING FORMULA MX HELMET BLUE/WHITE

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market

DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact

FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM – EPS (Expanded Polystyrene) and comfort liner align to maximize airflow

QUICK RELEASE WASHABLE DRI-LEX® COMFORT LINER & CHEEK PADS – ultra plush, hydrophilic (water loving) liner absorbs sweat, is perforated to provide plenty of ventilation, and easy to remove and clean with our “Quick Snap” system

TITANIUM HARDWARE – helmet is constructed using super-strong, ultra-lightweight machined titanium screws, rivets, and D-rings for superior strength and years of worry free use

PREMIUM HELMET BAG AND EXTRA VISOR – we include a stylish helmet bag, with plenty of storage and padding to protect your investment, and an extra visor with each helmet

OPTIONAL CARBON FIBER INTAKE VENT WING – can be added to the helmet for increased direction of airflow on the front vents

FLY RACING FORMULA MX HELMET BLUE/WHITE

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market

DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact

FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM – EPS (Expanded Polystyrene) and comfort liner align to maximize airflow

TITANIUM HARDWARE – helmet is constructed using super-strong, ultra-lightweight machined titanium screws, rivets, and D-rings for superior strength and years of worry free use

PREMIUM HELMET BAG AND EXTRA VISOR – we include a stylish helmet bag, with plenty of storage and padding to protect your investment, and an extra visor with each helmet

OPTIONAL CARBON FIBER INTAKE VENT WING – can be added to the helmet for increased direction of airflow on the front vents

FLY RACING FORMULA MX HELMET RED/WHITE

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market

DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact

FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM – EPS (Expanded Polystyrene) and comfort liner align to maximize airflow

TITANIUM HARDWARE – helmet is constructed using super-strong, ultra-lightweight machined titanium screws, rivets, and D-rings for superior strength and years of worry free use

PREMIUM HELMET BAG AND EXTRA VISOR – we include a stylish helmet bag, with plenty of storage and padding to protect your investment, and an extra visor with each helmet

OPTIONAL CARBON FIBER INTAKE VENT WING – can be added to the helmet for increased direction of airflow on the front vents

FLY RACING FORMULA MX HELMET BLACK

Mon, 21 May 2012 03:13:19 +0000

SNELL M2010, DOT APPROVED FOR USA - other standards include: ECE and AS (Australian). Meets or exceeds the toughest safety standards on the market

DUAL DENSITY EPS LINER – two layers of EPS (Expanded Polystyrene), one softer one slightly harder, combine to provide more progressive impact absorption for different levels of impact

FLOW THROUGH EPS AND COMFORT LINER AIR SYSTEM – EPS (Expanded Polystyrene) and comfort liner align to maximize airflow

TITANIUM HARDWARE – helmet is constructed using super-strong, ultra-lightweight machined titanium screws, rivets, and D-rings for superior strength and years of worry free use

PREMIUM HELMET BAG AND EXTRA VISOR – we include a stylish helmet bag, with plenty of storage and padding to protect your investment, and an extra visor with each helmet

OPTIONAL CARBON FIBER INTAKE VENT WING – can be added to the helmet for increased direction of airflow on the front vents

VEMAR JIANO BLUETOOTH HELMET

Mon, 21 May 2012 03:13:19 +0000

The Jiano Bluetooth helmet from Vemar comes fully equipped, no assembly required! Engineered in Italy to the motorcyclist specific EC standard, the Jiano is a very comfortable fitting helmet for riders who like to ride for long distances. Use two together to have a wireless connection to your passenger.

VEMAR JIANO EVO TC HELMET

Mon, 21 May 2012 03:13:19 +0000

The Jiano Evo TC features a mid-oval shell shape which offers a more generous fit front to back and more snug fit ear to ear The Jiano Evo TC is a very comfortable fitting helmet for riders who like to ride for long distances. The internal liner fits the rider without any kind of pressure points The exterior shell is constructed a Kevlar/Carbon Fiber/Fiberglass mix Exterior shell is aerodynamically shaped for ease of cutting through the air with less buffeting and wind noise, thus lessening the stress on the rider’s neck muscles after a long ride The Jiano Evo TC shield closes when the chin bar of the helmet is opened. Not all modular helmets do this. If both the chin bar of a helmet and the shield are open at the same time the aerodynamic effect created is very uncomfortable (unsafe) for the rider, this risk is eliminated with the Jiano Evo TC The Jiano Evo TC’s chin bar lock mechanism exceeds expectations for safety and convenience. The face cover lock utilizes metal pins and hooks, making it extremely resistant to opening in the event of an accident. At the same time, the recessed actuation button is easy to use even with one gloved hand Two sizes of outer shells cover the 6 helmet sizes for the ultimate in a light weight yet proportional fit An anti-fog, non-scratch 2.2mm thick outer quick release clear shield is standard

VEMAR JIANO STREET HELMET

Mon, 21 May 2012 03:13:19 +0000

Besides the clear shield and flip up front chin bar the Jiano features an integrated, tinted, slide up or down fighter pilot type shield. This trick feature plus an effective vent system and a sleekly styled shell make the Vemar Jiano the finest flip up helmet available in the USA today. All Vemar helmets meet USA DOT specs as well as the motorcyclist specific European Union spec, the only motorcyclist specific test standard in the world!

SIDI CANYON GORE-TEX BOOT

Mon, 21 May 2012 03:13:19 +0000

Equipped with a Gore-Tex waterproof breathable membrane.
Top grain leather construction.
Velcro closure system above the ankle
Micro adjustable strap system below the ankle.
Full length inner gaiter.
Rigid nylon innersole.
Composite inner sole.
Internal heel protection.
Internal ankle protection.
Internal toe protection.
Leather toe shift-brake pad.
Nylon plate and internally paddded shin plate.
Double stitched in all high stress areas.
Bonded non-slip lug type sole.
Removable arch support.
Reflective panels
Contrasting texture upper.

AGV TELLURIDE TOURING GLOVES

Mon, 21 May 2012 03:13:19 +0000

A full length, all weather multi purpose glove. Constructed of a hybrid combination of premium cowhide leather and Schoeller Keprotec textiles for high tear strength and abrasion resistance. Plush, soft and comfortable interior. Hipora membrane is waterproof and breathable. Internally insulated for the warmest possible results on cold days. Clarino synthetic leather reinforced palm, index finger and thumb for maximum abrasion resistance. Hard metal mesh armor with shock absorbing memory foam on the knuckles for extra protection. High tensile strength nylon thread stitching used throughout. High impact or use areas are all double stitched. Pre-curved fingers for a snug and comfortable fit. Dual layer panels are used in the upper hand for the finest non-binding fit possible. Elastic band in wrist for a snug fit. Large reflective panel is used on the back of the hand for added safety. Single cuff closure with shock absorbing foam padding in the wrist area.

AGV MAIN STREET SHORT GLOVES

Mon, 21 May 2012 03:13:19 +0000

A short multi purpose glove. Upper is constructed of Clarino and Airprene synthetic materials. Clarino synthetic leather is used for construction of the palm and bottom of the fingers. Soft and comfortable interior. Multi layer Clarino synthetic leather reinforced palm, index finger and thumb for maximum abrasion resistance. Vibration deadening gel inserts are used throughout the palm area. Between the finger areas reinforced with Lycra elastic expansion panels. Pre-curved fingers for a snug and comfortable fit. Multi layer Clarino synthetic leather is used on the top of fingers for extra protection. High tensile strength nylon thread stitching used throughout. High impact or use areas are all double stitched. Reflective piping is used on the back of the hand for added safety. Neoprene cuff with wrist strap for a snug fit.

AGV AEROMESH SHORT GLOVES

Mon, 21 May 2012 03:13:19 +0000

A short multi purpose glove. Upper is constructed of vented mesh textiles and nylon. Clarino synthetic leather is used for construction of the palm and bottom of the fingers. Soft and comfortable interior. Multi layer Clarino synthetic leather reinforced palm and thumb for maximum abrasion resistance. Dual layer panels are used in the upper hand for the finest non-binding fit possible. Perforated panels between the fingers Shock absorbing memory foam on the knuckles and tops of fingers for extra protection. High tensile strength nylon thread stitching used throughout. High impact or use areas are all double stitched. Pre-curved fingers for a snug and comfortable fit. Neoprene cuff with wrist strap for a snug fit.

AGV MAYHEM SHORT GLOVES

Mon, 21 May 2012 03:13:19 +0000

A short sport-freestyle glove. Upper is constructed of vented mesh textiles and nylon. Clarino synthetic leather is used for construction of the palm and bottom of the fingers. Soft and comfortable interior. Vented mesh textile is used on the back of the hand. Multi layer Clarino synthetic leather reinforced palm for maximum abrasion resistance. Extra palm pad is positioned on the base of the palm. Dual layer panels are used in the upper hand for the finest non-binding fit possible. Textured high grip material used on the inside of the thumb. Finger joints reinforced with Lycra elastic expansion panels. Finger and top of hand intake vents for maximum air-flow Hard metal mesh armor with shock absorbing memory foam on the knuckles for extra protection. High tensile strength nylon thread stitching used throughout High impact or use areas are all double stitched Pre-curved fingers for a snug and comfortable fit. Neoprene cuff with wrist strap for a snug fit.

AGV STILETTO SHORT GLOVES

Mon, 21 May 2012 03:13:19 +0000

A short sport-freestyle glove. Upper is constructed of premium cowhide leather with high tear strength and abrasion resistance. Clarino synthetic leather is used for construction of the palm and bottom of the fingers. Soft and comfortable interior. Perforated leather back of hand and top of fingers. Clarino synthetic leather reinforced palm for maximum abrasion resistance. Extra palm pad is positioned on the base of the palm. Dual layer leather panels are used in the upper hand for the finest non-binding fit possible. Textured high grip material used on the inside of the thumb. Finger and top of hand intake vents for maximum air-flow Hard metal mesh armor with shock absorbing memory foam on the knuckles for extra protection. High tensile strength nylon thread stitching used throughout High impact or use areas are all double stitched Pre-curved fingers for a snug and comfortable fit. Wrist strap for a snug fit.

AGV VELOCE SHORT GLOVES

Mon, 21 May 2012 03:13:19 +0000

A short leather sport-freestyle glove. Fully constructed of premium cowhide leather with high tear strength and abrasion resistance. Soft and comfortable interior. Perforated leather back of hand, top and bottom of fingers. Leather reinforced palm, little finger and thumb areas for maximum abrasion resistance. Hard metal mesh armor with shock absorbing memory foam on the knuckles for extra protection. High tensile strength nylon thread stitching used throughout. High impact or use areas are all double stitched. Textured high grip material used on the inside of the first two fingers. Pre-curved fingers for a snug and comfortable fit. A pleated leather panel is used in the upper hand and fingers for the finest non-binding fit possible. Elastic panel in wrist with a wrist strap for a snug fit.

AGV MONZA GLOVES

Mon, 21 May 2012 03:13:19 +0000

A full length sport-racing glove. Constructed of premium cowhide leather with high tear strength and abrasion resistance. Soft and comfortable interior. Textured high grip reinforced palm for secure handling. Hard metal mesh armor with shock absorbing memory foam on the knuckles for extra protection. High tensile strength nylon thread stitching used throughout. High impact or use areas are all double stitched. Textured high grip material used on the inside of the first two fingers. Pre-curved fingers for a snug and comfortable fit. Air pad at base of upper hand and thumb for extra protection. Elastic panel in wrist with a wrist strap for a snug fit. Double cuff closure with shock absorbing foam padding in the wrist area.

AGV WILLOW GLOVES

Mon, 21 May 2012 03:13:19 +0000

A full length sport-racing glove. Constructed of premium cowhide leather with high tear strength and abrasion resistance. Soft and comfortable interior. Leather reinforced palm and thumb for maximum abrasion resistance. Hard metal mesh armor with shock absorbing memory foam on the knuckles for extra protection. High tensile strength nylon thread stitching used throughout. High impact or use areas are all double stitched. Finger vents for maximum air-flow. Perforated leather panels between the finger Pre-curved fingers for a snug and comfortable fit. Dual layer leather panels are used in the upper hand for the finest non-binding fit possible. Air pad at base of upper hand with memory foam upper wrist pads. Elastic panel in wrist with a wrist strap for a snug fit. Double cuff closure with shock absorbing foam padding in the wrist area.

AGV DRAGON GLOVES

Mon, 21 May 2012 03:13:19 +0000

A full length sport-racing glove. Constructed of premium cowhide leather with high tear strength and abrasion resistance. Soft and comfortable interior. Leather reinforced palm, thumb and outer of little finger for maximum abrasion resistance. Extra palm pads are positioned on the base and outside of the palm. An extra impact pad is positioned on the outside of the hand before the wrist. Genuine carbon fiber armor with shock absorbing memory foam on the knuckles for extra protection. High tensile strength nylon thread stitching used throughout. High impact or use areas are all double stitched. Finger vents for maximum air-flow. Pre-curved fingers for a snug and comfortable fit. A pleated leather panel is used in the upper hand for the finest non-binding fit possible. Wrist strap with protective cover. Single cuff closure with shock absorbing foam padding in the wrist area.

AGV LAGUNA GLOVES

Mon, 21 May 2012 03:13:19 +0000

AGV Sport's premier full length sport-racing glove. Constructed of premium cowhide leather with high tear strength and abrasion resistance. Soft and comfortable interior. Leather reinforced palm, thumb and outer of little finger for maximum abrasion resistance. Extra palm pads are positioned on the base and outside of the palm. An extra impact pad is positioned on the outside of the hand before the wrist. Perforated leather panels between the fingers. Genuine carbon fiber armor with shock absorbing memory foam on the knuckles for extra protection. High tensile strength nylon thread stitching used throughout. High impact or use areas are all double stitched. Double finger vents with perforated leather between the fingers for maximum air-flow. Pre-curved fingers for a snug and comfortable fit. A pleated leather panel is used in the upper hand for the finest non-binding fit possible. Wrist strap with protective cover. Double cuff closure with shock absorbing foam padding in the wrist area.

AGV SOLARE TEXTILE JACKET

Mon, 21 May 2012 03:13:19 +0000

A 100% polyester textile and mesh jacket for durability and comfort. Full mesh lining. CE approved shoulder and elbow protectors. 8mm thick memory foam back pad. Full mesh chest, belly, back and front of arms for maximum cooling on hot days. Moisture wicking material is used in the collar for maximum rider comfort. Reflective piping is used on the front and rear of the jacket for safety. Heavy duty seam construction for maximum tear resistance. World famous YKK zippers. Extra long zipper pulls are used on all zippers. Sleeve gather straps are used on each arm for maximum comfort. Two front hand warmer pockets. Inside horizontal and vertical pockets one of which is designed to be a media pocket. Adjustable Velcro waist tabs. Two position cuff snaps.

AGV VALENCIA TEXTILE JACKET

Mon, 21 May 2012 03:13:19 +0000

A 100% polyester textile and mesh jacket that is highly reinforced with high abrasion resistant ballistic nylon for optimum protection, durability and comfort. Removable waterproof and breathable Reissa liner zips in over a permanent mesh lining. Liner features one pocket and may be worn separately as a windbreaker. CE approved dual-density shoulder and elbow protectors. 8mm thick memory foam upper chest and upper and lower back padding. Permanent mesh lining. Perforated chest, belly, sides and front of upper arms and back for maximum cooling on hot days. Moisture wicking material as well as neoprene is used in the collar for maximum rider comfort. Pre curved arms for a perfect look, fit and for maximum riding comfort. Reflective piping is used on the front and rear of the jacket for safety. Multiple stitched main seam construction for maximum tear resistance. World famous YKK zippers. Extra long zipper pulls are used on all zippers. Dual sleeve gather snaps are used on each arm for maximum comfort. Pleated textile panels are used in multiple locations for the finest non-binding fit possible. Waist connection zipper for pant attachment. Two front hand warmer pockets. Inside horizontal and vertical pockets one of which is designed to be a media pocket. Adjustable Velcro waist tabs.

AGV LAGUNA TEXTILE JACKET

Mon, 21 May 2012 03:13:19 +0000

A 100% polyester textile and mesh jacket that is highly reinforced with high abrasion resistant ballistic nylon for optimum protection, durability and comfort. Removable waterproof and breathable Reissa liner zips in over a permanent mesh lining. Liner features one pocket and may be worn separately as a windbreaker. CE approved dual-density shoulder and elbow protectors. 8mm thick memory foam upper chest and upper and lower back padding. Molded plastic air vents are positioned on the shoulders. External Titanium shoulder caps. Perforated chest, belly, and front of upper arms and back for maximum cooling on hot days. Moisture wicking material is used in the collar for maximum rider comfort. Pre curved arms for a perfect look, fit and for maximum riding comfort. Reflective piping is used on the front and rear of the jacket for safety. Multiple stitched main seam construction for maximum tear resistance. World famous YKK zippers. Extra long zipper pulls are used on all zippers. Dual sleeve gather snaps are used on each arm for maximum comfort. Pleated textile panels are used in multiple locations for the finest non-binding fit possible. Waist connection zipper for pant attachment. Two front hand warmer pockets. Inside horizontal and vertical pockets one of which is designed to be a media pocket. Adjustable Velcro waist tabs.

AGV TELLURIDE WATERPROOF JACKET

Mon, 21 May 2012 03:13:19 +0000

AGV Sport's three quarter length touring/adventure jacket. Multi layer Dura Guard textile jacket that is 100% windproof and waterproof with high abrasion resistance for optimum protection, durability and comfort. Constructed with a permanent waterproof yet breathable Reissa membrane between the outer layer and liner. Removable and washable quilted liner zips in over a permanent mesh lining. CE approved dual-density shoulder and elbow protectors. 8mm thick memory foam back padding. Zip open air vents are positioned on the shoulders and back. Moisture wicking material is used in the collar for maximum rider comfort. Pre curved arms for a perfect look, fit and for maximum riding comfort. Reflective piping is used on the shoulders, upper arms and rear of the jacket for safety. Multiple stitched main seam construction for maximum tear resistance. World famous YKK zippers throughout. Velcro secured wind flap over the two way main entry zipper. Equipped with a collar snap so the jacket may be used comfortably when open at the neck. Extra long zipper pulls are used throughout. Dual sleeve gather snaps are used on each arm for maximum comfort. Waist connection zipper for pant attachment. Outer pockets include; Four front horizontal entry pockets, two front vertical entry pockets in the chest area, one left sleeve pocket and a large rear pocket that can hold the quilted liner once removed. One interior zip open vertical wallet pocket. Elastic waist gatherer is positioned in the rear of the jacket. Adjustable Velcro waist, collar and cuff straps.

AGV TEMPEST TEXTILE JACKET

Mon, 21 May 2012 03:13:19 +0000

A 100% polyester textile jacket that is highly reinforced with high abrasion resistant ballistic nylon for optimum protection, durability and comfort. Constructed with a waterproof and breathable Reissa membrane. Removable and washable quilted liner zips in over a permanent mesh lining. CE approved dual-density shoulder and elbow protectors. 8mm thick memory foam upper and lower back padding. Zip open air vents are positioned on the upper chest, arms and back. Moisture wicking material is used in the collar and cuffs for maximum rider comfort. Pre curved arms for a perfect look, fit and for maximum riding comfort. Reflective piping is used on the arms, front and rear of the jacket for safety. Multiple stitched main seam construction for maximum tear resistance. World famous YKK zippers. Extra long zipper pulls are used throughout. Dual sleeve gather snaps are used on each arm for maximum comfort. Pleated textile panels are used in multiple locations for the finest non-binding fit possible. Waist connection zipper for pant attachment. Two front hand warmer pockets and five interior pockets. Adjustable Velcro waist tabs.

AGV DRAGON LEATHER JACKET

Mon, 21 May 2012 03:13:19 +0000

1.2mm (body) to 1.4mm (impact areas) premium leather construction for optimum protection, durability and comfort. Removable and washable quilted liner with a pocket zips in over a permanent mesh lining. CE approved shoulder and elbow protectors. 10mm thick memory foam back protector. Extra padding is also provided via padded panels throughout the jacket. Zip open air vents are positioned on the chest and back of shoulders. Moisture wicking neoprene in the collar for maximum rider comfort. Pre curved arms for a perfect look, fit and for maximum riding comfort. Multiple stitched main seam construction for maximum tear resistance. World famous YKK zippers. Extra long zipper pulls are used on all zippers. Two front hand warmer pockets. Two inner pockets; one with zipper closure. Pleated leather panels are used in multiple locations for the finest non-binding fit possible. Two waist connection zippers for any type of pant attachment.

AGV LAGUNA LEATHER JACKET

Mon, 21 May 2012 03:13:19 +0000

1.2mm (body) to 1.4mm (impact areas) premium, top-grain leather construction for optimum protection, durability and comfort. Removable and washable quilted liner zips in over a permanent mesh lining. CE approved dual-density shoulder and elbow protectors. 8mm thick memory foam upper and lower back and chest padding. Molded plastic air vents are positioned on the shoulders. External titanium shoulder caps. Perforated chest, belly and the front of the upper arms for maximum cooling on hot days. Moisture wicking neoprene is used in the collar for maximum rider comfort. Aerodynamic and protective vented back hump. Pre curved arms for a perfect look, fit and for maximum riding comfort. Reflective piping is used on the front and rear of the jacket for safety. Multiple stitched main seam construction for maximum tear resistance. World famous YKK zippers. Extra long zipper pulls are used on all zippers. Teramid Kevlar fabric is used on the inner arms for maximum comfort. Pleated leather panels are used in multiple locations for the finest non-binding fit possible. Two waist connection zippers for any type of pant attachment.

AGV MONZA LEATHER JACKET

Mon, 21 May 2012 03:13:19 +0000

1.2mm (body) to 1.4mm (impact areas) premium, top-grain leather construction for optimum protection, durability and comfort. Full mesh lining. CE approved dual-density shoulder and elbow protectors. 10mm thick memory foam back pad. Perforated air vents are positioned on the shoulders and lower back. External Titanium shoulder caps. Moisture wicking neoprene in the collar for maximum rider comfort. Pre curved arms for a perfect look, fit and for maximum riding comfort. Reflective material is used on the AGV Sport front and rear logos for safety. Multiple stitched main seam construction for maximum tear resistance. World famous YKK zippers. Extra long zipper pulls are used on all zippers. Two front hand warmer pockets. Two inner pockets; one with Velcro closure, one with zipper closure. Teramid Kevlar fabric is used on the inner arms for maximum comfort. Waist connection zipper for pant attachment.

AGV WILLOW LEATHER JACKET

Mon, 21 May 2012 03:13:19 +0000

1.2mm (body) to 1.4mm (impact areas) premium leather construction for optimum protection, durability and comfort. Removable and washable quilted liner with a pocket zips in over a permanent mesh lining. CE approved shoulder and elbow protectors. 10mm thick memory foam back protector. Extra padding is also provided via padded panels on the chest and upper-rear shoulder areas. Zip open air vents are positioned on the upper arms and lower back. Perforated armpit area. Moisture wicking neoprene in the collar and a portion of each cuff for maximum rider comfort. Pre curved arms for a perfect look, fit and for maximum riding comfort. Multiple stitched main seam construction for maximum tear resistance. World famous YKK zippers. Extra long zipper pulls are used on all zippers. Two front hand warmer pockets. Two inner pockets; one with zipper closure. Pleated leather panels are used in back of the shoulders and in the elbows for the finest non-binding fit possible. Waist connection zipper for pant attachment. Reflective piping is used on the front and rear of the jacket for safety. Two position waist snaps plus zip open expansion panel.

AGV PELLA PERFORATED LEATHER JACKET

Mon, 21 May 2012 03:13:19 +0000

The Pella Perforated Leather Jacket has the same features as the Pella, plus fully perforated front and rear for maximum ventilation.

AGV PELLA LEATHER JACKET

Mon, 21 May 2012 03:13:19 +0000

Removable CE approved shoulder and elbow protectors 1cm thick memory foam back protector Fully perforated front and back for maximum ventilation Moisture wicking neoprene in the collar for maximum rider comfort Pre curved arms for a perfect look, fit and for maximum riding comfort Waist connection zipper for pant attachment Multiple stitched main seam construction for maximum tear resistance World famous YKK zippers Custom zip pulls on each zipper Full mesh lining Two front hand warmer pockets Inside horizontal and vertical pockets Inside waterproof media pocket consists of cell phone pocket and IPOD pocket with earphone wire opening and tab for tangle free use

AGV TOPANGA PERFORATED LEATHER JACKET

Mon, 21 May 2012 03:13:19 +0000

The Topanga Perforated Leather Jacket has the same features as the Topanga, with the addition of perforation panels on the front and rear for added ventilation.

AGV TOPANGA LEATHER JACKET

Mon, 21 May 2012 03:13:19 +0000

Premium, top-grain leather construction for optimum protection, durability and comfort Full mesh lining Removable CE approved shoulder and elbow protectors 1cm thick memory foam back protector Strategically placed zip front intake and rear exit vents for maximum ventilation Moisture wicking neoprene in the collar for maximum rider comfort Adjustable Velcro waist tabs Pre curved arms for a perfect look, fit and for maximum riding comfort Waist connection zipper for pant attachment Multiple stitched main seam construction for maximum tear resistance World famous YKK zippers Custom zip pulls on each zipper Two front hand warmer pockets Inside horizontal and vertical pockets Inside waterproof media pocket consists of cell phone pocket and IPOD pocket with earphone wire opening and tab for tangle free use

SIDI DOHA BOOT

Mon, 21 May 2012 03:13:19 +0000

Low cut design.
Heel reflective stripe.
Leather toe shift pad.
Double stitched in all high stress areas.
Lace and Velcro closure.
Leather/Cordura upper.

Reinforced internal toe.
Ankle ball protection panel.
Removable arch support.
Reinforced internal heel cup.

SIDI LAGUNA GORE-TEX

Mon, 21 May 2012 03:13:19 +0000

Classic touring style equipped with a GORE-TEX waterproof-breathable membrane
Top grain leather construction
Contrasting Cordura upper
Removable arch support
Velcro and zipper closure system
Full length inner gaiter
Rigid nylon innersole
Removable arch support
Internal heel protection
Internal ankle protection
Internal toe protection
Leather toe shift-brake pad
Internally padded Nylon shin plate
Double stitched in all high stress areas
Reflective panel above the heel
Bonded non-slip Sidi touring sole
Currently Sidi products can only be shipped to U.S. customers

SIDI CLEVER AIR BOOT

Mon, 21 May 2012 03:13:19 +0000

THE SOLE:

Composite inner sole.
All new Sidi non-slip sole.

PROTECTION:

Internal protective ankle ball pads.
Protective internal toe cup.

FIT & FUNCTION:

Lorica and vented Nylon outer construction.
Cambrelle lining.
Removable arch support.
Fully encapsulated heel cup.
Double stitched in all high stress areas.
DuPont polymer toe shift pad.
Velcro and zipper closure system.
Reflective panel.

SIDI ADVENTURE GORE-TEX

Mon, 21 May 2012 03:13:19 +0000

Gore Tex breathable and waterproof membrane equipped to add a water resistant yet breathable barrier between the elements and the rider’s feet
Soft rubber sole for maximum grip
Replaceable strap system
Top grain leather construction
Composite inner sole
Removable arch support
Exclusive cam-lock buckle system
Cambrelle lining
Slim, cool non-bootie design
Rigid, shock resistant, anatomically shaped heel for maximum protection
Split grain leather inner anti-wear/heat panel
Single Flex System upper
Currently Sidi products can only be shipped to U.S. customers

SIDI CHARGER BLACK

Mon, 21 May 2012 03:13:19 +0000

Three extended ribs are featured at the back of the boot to assist the rider in making upshifts with his heel when starting a race. Rigid, shock resistant, anatomically shaped heel for maximum protection. Sidi boots do not incorporate inner booties into their design, and for good reason. Booties make the design larger and cumbersome; add to the boot's thickness, which interferes with shifting, plus the inner booties retain body heat affecting the rider's performance and comfort. Sidi's exclusive cam-lock buckle system is acknowledged as the finest system on the planet. It must be as most of Sidi's competitors have attempted to copy various aspects of it. The cam-lock buckle system incorporates a strap memory retention system. Adjust the straps once and they will be at the same position for every ride after that! No more readjusting for every ride or mid-day during a ride.

SIDI CROSSFIRE TA

Mon, 21 May 2012 03:13:20 +0000

The hinged, dual position, stitch-free upper is constructed from injection-molded plastic. With the exclusive Dual Flex system and the four floating â€“ independent straps the Crossfire can provide each rider with a personal fit no matter his body shape or if he uses knee braces or not. Three extended ribs are featured at the back of the boot to assist the rider in making upshifts with his heel when starting a race. Rigid, shock resistant, anatomically shaped heel for maximum protection.

SIDI CROSSFIRE SR

Mon, 21 May 2012 03:13:20 +0000

Sidi's exclusive, patented, adjustable calf system allows the rider to adjust the diameter of the Crossfire boot at the calf. This system, along with longer upper straps, allows the Crossfire boot to accommodate riders with larger calves easier than any other boot now available. The Crossfire can accommodate riders with up to a 22-inch calf diameter 14 inches above from the bottom of their heel. The inner plastic plate is made of two different materials; a rigid one to support the boot and a heat resistant one to protect the rider's leg from exhaust heat. All components of this system are fully replaceable and are available in a wide variety of colors.

SIDI DOHA BOOTS

Mon, 21 May 2012 03:13:20 +0000

A low cut stunter design with a composite inner sole and a removable arch support, the Doha also sports a non-slip sole, reinforced internal heel cup and toe, double-stitchin gin all high stress areas and a lace & Velcro closure. Leather/Cordura upper construction. Ankle ball protection panel. Heel reflective stripe. Leather toe shift pad.

SIDI BLADE BOOTS

Mon, 21 May 2012 03:13:20 +0000

Low cut design and the lightest boot in the Sidi line, the Blade also features a Lorica outer construction, perforatedTeflon treated nylon lining and a composite inner sole.

SIDI FUSION BOOTS

Mon, 21 May 2012 03:13:20 +0000

Composite inner sole Dual compound sole Vertebra system Achilles and rear calf protection panel Replaceable nylon toe scuff pad Replaceable outer ankle protective cap Nylon shin deflector plate Fully encapsulated heel cup DuPont polymer toe shift pad An elastic panel adjacent to the entry zipper allows a bind free zip and improved fit Removable arch support Double stitched in all high stress areas Zipper and Velcro closure system Lorica outer construction Perforated Teflon treated nylon lining

SIDI STREETBURNER BOOTS

Mon, 21 May 2012 03:13:20 +0000

The Streetburner is designed for stunters, or any rider who just want the racer look without wearing a full height boot.The Sidi Streetburner incorporates many of the Sidi Vertigo Corsa award winning features. Granted it aint cheap but when was the last time that any product of timeless design and quality was?

SIDI VERTIGO BOOTS

Mon, 21 May 2012 03:13:20 +0000

The Vertigo was created after an arduous 2+ year development period with lofty goals in mind. The boot had to push the technology of the sport road boot segment to an even higher level than the legendary Vertebra series. They are designed to be the best, no matter the cost. The Vertigo series of boots has achieved all that and much more!

SIDI VERTIGO MEGA GORE-TEX BOOTS

Mon, 21 May 2012 03:13:20 +0000

The Vertigo Mega Gore Tex features double E width and has a larger circumference around the whole foot, to give you a larger, more comfortable fit that you can't find anywhere else. The legendary Gore Tex membrane is encapsulated in a top grain leather outer shell for a 100% waterproof wide boot, one of only two in the USA!

SIDI VORTICE AIR BOOTS

Mon, 21 May 2012 03:13:20 +0000

The all-new Vortice Air has a perforated Lorica outer for maximum air flow. The boot is constructed of leather-like (but way stronger & lighter) Lorica, lined with Teflon vented mesh, with soft Cambrelle in the toe area.

SIDI VORTICE BOOTS

Mon, 21 May 2012 03:13:20 +0000

The all-new Vortice is constructed of leather-like (but way stronger & lighter) Lorica, lined with Teflon vented mesh, with soft Cambrelle in the toe area.

SIDI VERNICE VORTICE BOOTS

Mon, 21 May 2012 03:13:20 +0000

Identical in design to the Vortice, the Vernice's Lorica Micro fiber treatment gives the boots a high gloss, shiny finish. A Sidi Vortice Vernice can't be missed on the track! Used by Josh Herrin during his four race wins in the 2009 AMA Daytona Sportbike series.

SIDI ST BOOTS

Mon, 21 May 2012 03:13:20 +0000

Composite inner sole. Dual compound sole. External ankle brace system. Sidiâ€™s exclusive cam-lock buckle system for easy entry and boot removal while still offering a perfect glove like fit. Bolt on (no Velcro!) replaceable, adjustable and aerodynamic nylon scuff pads on the toe. Padded Achilles area. DuPont polymer toe shift pad. Lorica outer construction. Removable arch support. Double stitched in all high stress areas. Closable air vents on the foot outer. All bolt on parts are replaceable. An elastic panel adjacent to the entry zipper allow a bind free zip and improved fit. Perforated Teflon treated nylon lining. Replaceable, Shock absorbing heel cup. The ST can accommodate riders with up to an 15-inch calf diameter 12.5 inches above from the bottom of their heel.

SIDI FUSION AIR BOOTS

Mon, 21 May 2012 03:13:20 +0000

Sidi has expanded its line of cost effective competition/sport boots and offers the Fusion Air Boots for the budget-minded rider. The Fusion Air boots combines all the functionality of the Fusion Boot with an outer shell constructed of perforated Lorica for maximum air flow without compromising protection.

SIDI ST AIR BOOTS

Mon, 21 May 2012 03:13:20 +0000

The ST Air has a perforated Lorica outer for maximum air flow. Composite inner sole. Dual compound sole. External ankle brace system. Sidi's exclusive cam-lock buckle system for easy entry and boot removal while still offering a perfect glove like fit. Bolt on (no Velcro!) replaceable, adjustable and aerodynamic nylon scuff pads on the toe. Padded Achilles area. DuPont polymer toe shift pad. Lorica outer construction. Removable arch support. Double stitched in all high stress areas. Closable air vents on the foot outer. All bolt on parts are replaceable. An elastic panel adjacent to the entry zipper allow a bind free zip and improved fit. Perforated Teflon treated nylon lining. Replaceable, Shock absorbing heel cup. The ST can accommodate riders with up to an 15-inch calf diameter 12.5 inches above from the bottom of their heel.

SIDI COBRA RAIN BOOTS

Mon, 21 May 2012 03:13:20 +0000

The patented and trademarked Vertebra System protects the rider’s Achilles tendon Thermoplastic resin ankle protection Bolt on (no Velcro!) replaceable, adjustable and aerodynamic nylon scuff pads on the toe Composite inner sole Removable arch support Nylon shin deflector plate Lorica outer construction Double stitched in all high stress areas All bolt on parts are replaceable An elastic panel adjacent to the entry zipper allows a bind free zip and improved fit Dual compound sole DuPont polymer toe shift pad Membrane equipped to add a water resistant yet breathable barrier between the elements and the rider’s feet Replaceable shock absorbing heel cup Padded Achilles area

SIDI COBRA AIR BOOTS

Mon, 21 May 2012 03:13:20 +0000

Perforated Lorica outer for maximum air flow The patented and trademarked Vertebra System protects the rider’s Achilles tendon Thermoplastic resin ankle protection Bolt on (no Velcro!) replaceable, adjustable and aerodynamic nylon scuff pads on the toe Composite inner sole Removable arch support Nylon shin deflector plate Lorica outer construction Double stitched in all high stress areas All bolt on parts are replaceable An elastic panel adjacent to the entry zipper allows a bind free zip and improved fit Dual compound sole DuPont polymer toe shift pad Perforated Teflon treated nylon lining Replaceable shock absorbing heel cup Padded Achilles area

SIDI COBRA BOOTS

Mon, 21 May 2012 03:13:20 +0000

Cobra Boots have a Dual compound sole and composite inner sole. Protection includes: Vertebra system Achilles and rear calf protection panel. Thermoplastic resin ankle protection. Bolt on (no Velcro!) replaceable, adjustable and aerodynamic nylon scuff pads on the toe. Nylon shin deflector plate. Replaceable shock absorbing heel cup. Padded Achilles area. Fit and Function includes Removable arch support. Lorica outer construction. Double stitched in all high stress areas. All bolt on parts are replaceable. An elastic panel adjacent to the entry zipper allows a bind free zip and improved fit. DuPont polymer toe shift pad. Perforated Teflon treated nylon lining.

SIDI FUSHION RAIN BOOTS

Mon, 21 May 2012 03:13:20 +0000

New for 2011, the Fusion Rain.

RIVER ROAD PECOS MESH SHORTY GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Breathable mesh fabric on back • Textured rubber grip • Stretch fabric between fingers for comfort • Hook-and-loop closure provides a secure fit • Includes 1-year manufacturer's warranty

RIVER ROAD HOLLISTER SHORTY LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Genuine all-leather construction • Padded palm • Perforated finger backs for comfort • Knuckle vents • Hook-and-loop closure provides a secure fit • Includes 1-year manufacturer's warranty

RIVER ROAD BUSTER SHORTY LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Genuine all-leather construction • Perforated leather on back for comfort • Comfort Gel Palm - Gel pad in palm area provides comfort and nerve protection on long rides • Hook-and-loop closure provides a secure fit • Includes 1-year manufacturer's warranty

RIVER ROAD CARLSBAD SHORTY GLOVES

Mon, 21 May 2012 03:13:20 +0000

RIVER ROAD PECOS MESH GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Breathable mesh fabric on back • Textured rubber grip • Stretch fabric between fingers for comfort • Hook-and-loop closure provides a secure fit • Includes 1-year manufacturer's warranty

RIVER ROAD MYSTIC LEATHER-MESH GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Breathable mesh fabric on back • Leather covering knuckles for added protection • Comfort Gel Palm - Gel pad in palm area provides comfort and nerve protection on long rides • Stretch fabric between fingers for comfort • Adjustable wrist strap with hook-and-loop closure • Includes 1-year manufacturer's warranty

RIVER ROAD SWINDLER DISTRESSED LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Comfortable, summer-weight leather is distressed for a worn-in look and feel • Perforated leather back with knuckle vents keep you cool • Comfort Gel Palm - Gel pad in palm area provides comfort and nerve protection on long rides • Adjustable wrist strap offers a more precise fit • Includes 1-year manufacturer's warranty

RIVER ROAD STURGIS LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Comfortable summer-weight leather • Comfort Gel Palm - Gel pad in palm area provides comfort and nerve protection on long rides • Perforated leather back with knuckle vents keeps you cool • Adjustable wrist strap with hook-and-loop closure • Includes 1-year manufacturer's warranty

RIVER ROAD OUTLAW VINTAGE LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Comfortable summer-weight leather is rich distressed dark brown for a vintage worn-in look and feel • Perforated leather back with knuckle vents keeps you cool • Comfort Gel Palm - Gel pad in palm area provides comfort and nerve protection on long rides • Adjustable wrist strap offers a more precise fit • Includes 1-year manufacturer's warranty

RIVER ROAD MESA PERFORATED LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Genuine all-leather construction • Perforated leather back provides breathability and comfort • Adjustable wrist strap offers a more precise fit • Includes 1-year manufacturer's warranty

RIVER ROAD TUCSON LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

RIVER ROAD CUSTER GAUNTLET LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Classic styling with all-leather construction • Fully-lined for comfort • Lightly insulated with Thinsulate on back of the hand for warmth • Adjustable wrist strap with hook-and-loop closure • Includes 1-year manufacturer's warranty

RIVER ROAD MONTEREY LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Supple, all-leather construction • Perforated leather back for comfort • Comfort Gel Palm - Gel pad in palm area provides comfort and nerve protection on long rides • Padded knuckles • Adjustable wrist strap with hook-and-loop closure • Includes 1-year manufacturer's warranty

RIVER ROAD CHEYENNE LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Reinforced leather palm combined with a durable textile back • Waterproof, breathable and windproof Hipora glove insert • Thinsulate insulation for warmth • Adjustable wrist straps provide a secure fit • Reflective piping for safety

RIVER ROAD TAOS LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Supple, all-leather construction • Waterproof, breathable and windproof Hipora glove insert • Thinsulate insulation for warmth • Rubber shield wiper on left glove • Zippered gauntlet closure with adjustable wrist strap • Includes 1-year manufacturer's warranty

RIVER ROAD DEL RIO LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

Genuine all-leather construction • This riding glove offers a classic look and feel • Adjustable wrist strap offers a more precise fit • Includes 1-year manufacturer's warranty

RIVER ROAD LAREDO LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Genuine naked cowhide leather gloves • Comfort Gel Palm - Gel pad in palm area provides comfort and nerve protection on long rides • Adjustable wrist strap with hook-and-loop closure • Includes 1-year manufacturer's warranty

RIVER ROAD CHISEL LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

• Genuine all-leather construction with a premium matte finish • Perforated leather panels between fingers and across knuckles allow breathability • Comfort Gel Palm - Gel pad in palm area provides comfort and nerve protection on long rides • Includes 1-year manufacturer's warranty

RIVER ROAD FIRESTONE LEATHER GLOVES

Mon, 21 May 2012 03:13:20 +0000

Genuine naked cowhide leather gloves • Reinforced knuckle protection • Comfort Gel Palm - Gel pad in palm area provides comfort and nerve protection on long rides • Reflective piping • Adjustable wrist strap with hook-and-loop closure

RIVER ROAD SEDONA MESH JACKET

Mon, 21 May 2012 03:13:20 +0000

Abrasion-resistant, polyester mesh allows maximum air flow • A removable, insulated, fully-sleeved liner offers warmth in slightly cooler temperatures • Removable or upgradable EVA foam armor is used in the shoulders, elbows and back for protection • Adjustable waist side tabs provide a more precise fit • Reflective piping increases visibility • Several pockets give you plenty of storage space

RIVER ROAD LAUGHLIN TEXTILE JACKET

Mon, 21 May 2012 03:13:20 +0000

This soft yet durable, polyester/nylon blend jacket is treated to provide water resistance • 2 front chest intake combination vents/pockets and 2 vertical rear exhaust vents keep you cool • Protection comes from removable, CE-approved armor in shoulders and elbows • Removable or upgradable EVA foam armor in back offers added protection • The removable, insulated, fully-sleeved warm liner has a built-in pocket for most mobile devices • Reflective piping on front and back gives increased visibility • Snap-down adjustable waist side tabs provide a more precise fit • Several exterior and interior pockets offer plenty of storage space • Snap-down feature keeps collar from flapping in the wind

RIVER ROAD TREKKER TEXTILE JACKET

Mon, 21 May 2012 03:13:20 +0000

A soft yet durable, polyester/nylon blend makes this casual riding jacket comfortable both on and off the bike • Treated to provide water-resistance • Protection comes from removable, CE-approved armor in shoulders and elbows • Removable or upgradable EVA foam armor in back offers added protection • The removable, insulated, fully-sleeved liner has a built-in pocket for most mobile devices • Reflective piping on front and back gives increased visibility • Snap-down front flap helps keep you dry in a light rain • Several exterior and interior pockets offer plenty of room for essentials

RIVER ROAD RAIDER TEXTILE JACKET

Mon, 21 May 2012 03:13:20 +0000

Heavy-duty, abrasion-resistant polyester is treated for water-resistance • The removable, insulated, fully-sleeved liner has a built-in pocket for most mobile devices • Protection comes from removable, CE-approved armor in shoulders and elbows • Removable or upgradable EVA foam armor in back offers added protection • 2 front horizontal chest intake vents and 1 rear horizontal exhaust vent keep you cool • Zippered sleeve vents provide additional air flow • Reflective piping on front and back gives increased visibility • Adjustable cuffs and waist side belts give a precise, comfortable fit

RIVER ROAD CANYON TEXTILE JACKET

Mon, 21 May 2012 03:13:20 +0000

This lightweight, waterproof, breathable, Taslan 660 Denier jacket is extremely durable and has a comfortable, soft touch • The Humax® membrane makes the jacket highly resistant to outdoor conditions such as rain, wind and cold • 2 sleeve intake vents and 2 rear vertical exhaust vents keep you cool in warmer weather • Protection comes from removable, CE-approved armor in shoulders and elbows • Removable or upgradable EVA foam armor in back offers added protection • The removable, insulated, fully-sleeved warm liner has a built-in pocket for most mobile devices • Snap-down front flap helps keep you dry • Reflective tape on front and back gives increased visibility • Snap-down feature keeps collar from flapping in the wind • Several exterior and interior pockets offer plenty of room for essentials

RIVER ROAD TAOS TEXTILE JACKET

Mon, 21 May 2012 03:13:20 +0000

This waterproof, breathable, 3/4 length, heavy-duty textile riding jacket knows no boundaries • 2-way front zipper covered by a snap down external storm flap keeps water and cold air out • Venting comes from 2 front shoulder intake vents and 2 rear vertical exhaust vents; both sets of vents are protected with high quality waterproof zippers • The removable, insulated, fully-sleeved liner hasa built-in pocket for most mobile devices • High quality and flexible CE-approved armor isused in shoulders and elbows for protection; theback is protected by a removable, upgradable EVA foam armor • The suede-like lined collar with adjustable tabclosure offers a comfortable, secure fit • 2 chest storage pockets, protected by waterproofzippers, and 2 lower front pockets with snapclosure offer plenty of storage space • Reflective piping on front and back increases visibility • Adjustable cuffs and adjustable waist belt provide a secure fit • Jacket-to-pant zipper attachment system connects to the Taos Pant

RIVER ROAD BASIC LEATHER JACKET

Mon, 21 May 2012 03:13:20 +0000

Quality, imported leather offers protection and comfort • The lightly quilted lining will keep you comfortable in slightly cooler temperatures • Nylon stitching provides added durability • Shoulder treatments and aluminum hardware give this jacket a classic look • Interior and exterior pockets offer plenty of storage space • Adjustable waist belt provides a comfort form fit

RIVER ROAD DRIFTER LEATHER JACKET

Mon, 21 May 2012 03:13:20 +0000

Quality, medium-weight leather provides protection and comfort • The distressed finish (as in many miles) has a great look and feel • 2 front chest intake combination vents/pockets and 2 vertical rear exhaust vents keep you cool • 2 front, waist-level, on-seam zippered pockets to hold essentials • The fully-sleeved, removable, insulated liner has a built-in pocket for most mobile devices • 1 zippered placket pocket allows easy access to important contents • Snap closure tab collar provides a secure fit

RIVER ROAD HOODLUM LEATHER JACKET

Mon, 21 May 2012 03:13:20 +0000

Quality, medium-weight leather provides protection and comfort • Vintage finish gives that broken-in look and feel like your favorite pair of jeans • 2 front chest intake combination vents/pockets and 2 vertical rear exhaust vents keep you cool • Zippered sleeve vents allow additional air flow • The removable, insulated, fully-sleeved warm liner has a built-in pocket for most mobile devices • 2 front, waist level, on-seam zippered pockets will hold essentials • Snap closure tab collar provides a secure fit • Zippered placket pocket allows easy access to important contents • Snap closure adjustable waist provides a more precise fit

RIVER ROAD ROADSTER LEATHER JACKET

Mon, 21 May 2012 03:13:20 +0000

Quality, medium-weight leather provides protection and comfort • Vintage, old school styling gives a classic look • 2 front chest intake combination vents/pockets and 2 vertical rear exhaust vents keep you cool • The removable, insulated, fully-sleeved warm liner has a built-in pocket for most mobile devices • 2 front, waist-level, on-seam zippered pockets will hold essentials • Adjustable waist side belts provide a more precise fit • Zippered placket pocket allows easy access to important contents • Snap closure tab collar provides a secure fit

RIVER ROAD ANVIL LEATHER JACKET

Mon, 21 May 2012 03:13:20 +0000

Premium, matte finish leather offers protection and comfort • The removable, insulated, fully-sleeved liner has a built-in pocket for most mobile devices • Removable or upgradable EVA foam armor in the shoulders, elbows & back provides protection • Snap-down mandarin collar gives a secure, comfortable fit • Two large front zippered intake vents and two large rear exhaust vents allow maximum air flow • Two-way zippered sleeve cuffs with perforated leather gussets provide added ventilation • Zippered side gussets offer an adjustable fit and increased freedom of movement (Women’s Tango only) • Interior and exterior storage pockets give you plenty of room for essentials

RIVER ROAD ALLOY LEATHER JACKET

Mon, 21 May 2012 03:13:20 +0000

RIVER ROAD VISE LEATHER JACKET

Mon, 21 May 2012 03:13:20 +0000

Premium, matte finish leather offers protection and comfort • The removable, insulated, fully-sleeved liner has a built-in pocket for most mobile devices • Protection comes from removable or upgradable EVA foam armor in the shoulders, elbows and back • 2 front intake sleeve vents and 1 horizontal rear exhaust vent keep you cool • Power stretch leather panels at underarm and back stress points allow freedom of movement • Power stretch leather panels at the waist provide amore precise fit • Several exterior and interior storage pockets giveyou plenty of room for essentials

RIVER ROAD IRON CROSS GRAPHIX LEATHER JACKET

Mon, 21 May 2012 03:13:20 +0000

Graphics by Lethal Threat® Designs • Premium leather offers protection and comfort • The removable, insulated, fully-sleeved warm liner has a built-in pocket for most mobile devices • Removable or upgradable EVA foam armor in the shoulders, elbows and back provides protection • Two large front intake vents and two large rear exhaust vents allow maximum air flow • Two-way zippered sleeve cuffs with perforated leather gussets provide added ventilation • Two-way front zipper gives a comfortable fit in the riding position • Action back gusset allows increased freedom of movement • Snap-down mandarin collar provides a secure, comfortable fit • Several exterior and interior storage pockets give you plenty of storage space • Includes 2-year manufacturer's warranty

RIVER ROAD ANGEL-DEVIL GRAPHIX LEATHER JACKET

Mon, 21 May 2012 03:13:20 +0000

RIVER ROAD RIDE FREE GRAPHIX LEATHER JACKET

Mon, 21 May 2012 03:13:20 +0000

Graphics by Lethal Threat Designs • Premium leather offers protection and comfort • The removable, insulated, fully-sleeved warm liner has a built-in pocket for most mobile devices • Removable or upgradable EVA foam armor in the shoulders, elbows and back provides protection • Two large front intake vents and two large rear exhaust vents allow maximum air flow • Two-way zippered sleeve cuffs with perforated leather gussets provide added ventilation • Two-way front zipper gives a comfortable fit in the riding position • Action back gusset allows increased freedom of movement • Snap-down mandarin collar provides a secure, comfortable fit • Several exterior and interior storage pockets give you plenty of storage space

FIRSTGEAR SCOUT LEATHER JACKET

Mon, 21 May 2012 03:13:20 +0000

Premium, heavy-weight 1.2-1.3 mm leather Kwik-Dry water-resistance limits water absorption to 30% and dries quickly 2 front perforated leather vents that let air into the jacket and exit the rear exhaust vents Sleeve cuffs have 2-way zippers to regulate air through the mesh gussets Concealed under the front pockets is the Cargo Storage System Multiple compartments make it easy to carry all the necessities of the road Two front side pockets Powerstretch panels on the side and behind the arms provide freedom of movement and a flexible fit Reflective panels in the front and back CE-rated armor in the shoulders and elbows plus an EVA foam back pad Fully-sleeved, snap-out Thermoliner reflects body heat inward and permits humidity to escape Thermoneck extends up the neck and chin and stows back into the jacket when not in use Lined with soft-to-the-touch fleece Phone pocket on the left side and a map/cargo pocket on the right side For comfort, the collar is finished with a soft, smooth padded tipping

FIRSTGEAR MILITARY SPEC VEST

Mon, 21 May 2012 03:13:20 +0000

• Meets Military specifications for on base use • Highly visible reflective material so oncoming traffic can spot you 1000 yards away • Removable double window, super secure ID badge holder • Integrated stuff bag for stowing away when not in use • Maximum adjustability with four side tabs secured by hook-and-loop closure • Double layer mesh material cool and durable • Ribbed knit collar for added comfort • Rear storage pocket with easy access

FIRSTGEAR CONTOUR MESH WOMENS JACKET

Mon, 21 May 2012 03:13:20 +0000

Outer shell made of 250 denier poly mesh for complete ventilation in warm weather • Lightweight, nylon, perforated inner lining for maximum airflow • Detachable, fully-sleeved, water-resistant, wind block liner • Protection includes CE-rated armor in the shoulders and elbows plus an EVA foam back pad • 2 exterior pockets secured with zip closures • A Firstgear standard; inside every jacket there is a phone pocket on the left side and a map/cargo pocket on the right side. The Contour Mesh has these pockets in both the liner and the jacket. So, whether the liner is in or out, the internal pockets are in the same place • Left side interior security pocket with red slider for easy visibility. Perfect for a wallet • Reflective panels on the front and back offer nighttime visibility • Collar and sleeve cuffs finished with soft, smooth tipping for comfort • Jacket-to-pant 10” full conjunction zipper can be sewn onto your favorite pair of pants

FIRSTGEAR RUSH MESH JACKET

Mon, 21 May 2012 03:13:20 +0000

Outer shell made of 250 denier poly mesh for complete ventilation in warm weather Lightweight nylon perforated inner lining for maximum airflow Detachable, fully-sleeved, water-resistant, windblock liner Protection includes CE-rated armor in the shoulders and elbows plus an EVA foam back pad 2 exterior pockets secured with zip closures A Firstgear standard; inside every jacket there is a phone pocket on the left side and a map/cargo pocket on the right side. The Rush Mesh has these pockets in both the liner and the jacket. So, whether the liner is in or out, the internal pockets are in the same place Left side interior security pocket with red slider for easy visibility. Perfect for a wallet Reflective panels on the front, arms and back offer nighttime visibility Adjustable side waist straps held secure by hook-and-loop closure Jacket-to-pant 10” full conjunction zipper can be sewn onto your favorite pair of pants

FIRSTGEAR VENTURE AT MESH JACKET

Mon, 21 May 2012 03:13:20 +0000

Outer shell combines 250 denier polyester mesh panels for continuous airflow and 600 denier high density polyester for durability

FIRSTGEAR MESH-TEX JACKET

Mon, 21 May 2012 03:13:20 +0000

Outer shell made of 250 denier polyester mesh for total ventilation Lightweight nylon perforated lining for maximum airflow Detachable, fully sleeved water-resistant wind liner with phone and patch pocket CE armor to protect shoulders and elbows in addition to 2 layers of mesh fabric on shoulders and elbows EVA dense foam back pad 2 exterior hand warmer pockets Jacket interior includes left side phone pocket, right side patch pocket Left side Napoleon pocket with red slider for easy visibility Adjustable side waist spring snaps Reflective piping on back

FIRSTGEAR JAUNT JACKET

Mon, 21 May 2012 03:13:20 +0000

Hypertex waterproof and breathable, high-density 600 denier polyester outer shell CE-rated armor in the shoulders and elbows plus an EVA foam back pad with reinforced shoulders and elbows Inside the storm flap is a security pocket with a red slider for visibility Two front 8” intake plus two 10” back exhaust vents Detachable, insulated, fully-sleeved liner Four generous patch pockets with envelope fold, hook-and-loop and snap closures Adjustable straps on the collar, arms, sleeve cuffs and waist Reflective panels on the front, side, arms and back Phone pocket on the left side and a map/cargo pocket on the right side The Jaunt has these pockets in both the liner and the jacket

FIRSTGEAR RUSH TEX JACKET

Mon, 21 May 2012 03:13:20 +0000

Hypertex waterproof and breathable high-density 600 denier polyester outer shell Two 6" chest intake vents, two 10” back exhaust vents plus two 7” sleeve cuff vents with 2-way zippers YKK main zipper Storm flap system with rain gutter CE-rated armor in the shoulders and elbows plus an EVA foam back pad Reflective panels on the front, side arm and back Adjustable waist and sleeve cuffs for a personal fit Snap tab cover on the lower front of the jacket protects your fuel tank from scratches Two front side pockets protected by waterproof zippers Phone pocket on the left side and map/cargo pocket on the right side and a vertical zippered pocket Jacket-to-pants 10" full conjunction zipper can be sewn onto your favorite pair of pants A perfect jacket for fair weather temperatures and commuting

FIRSTGEAR KATHMANDU JACKET

Mon, 21 May 2012 03:13:20 +0000

HYPERTEX™ Waterproof and breathable outer shell, constructed of 420 denier rip-stop nylon 1.5 liter hydration bladder included in removable backpack Front left and right restraining loops for bladder tube make access easy CE armor in elbows and shoulders, plus an EVA dense foam back pad Achieve maximum air flow with two 9” chest intake vents, two 7” armpit intake vents and one extra large 14” rear exhaust vent Double storm flap front with snap and hook-and-loop closure that covers a #8 YKK Vision 2-way main zipper Dry Pockets will keep your stash dry - 5 in front with flaps, protected by waterproof zippers and/or envelope closures Large rear dry pouch with 14” mouth to stow insulated liner, protected by waterproof zipper and flap with snap and hook-and-loop closure to keep it all intact and safe from the elements Reflective piping on front and rear for improved night time visibility 1-time adjustable waist belt with hook-and-loop closure Adjustable cuff using hook-and-loop closure Custom fit the forearm and bicep with snap adjustments Elbow bend and armpit features waterproof and breathable stretch fabric that adds flexibility and reduces binding Removable, full insulated thermal liner with wind blocking, adjustable neoprene cuffs Removable liner also includes phone storage, large patch cargo and vertical wallet pocket with zippered closure and red slider for easy visibility Jacket to Pant 10” full conjunction zipper; fits easily through liner portal Collar conceals an under helmet rain hood to keep water out

FIRSTGEAR KENYA JACKET

Mon, 21 May 2012 03:13:20 +0000

Hypertex waterproof and breathable, high-density, 600 denier polyester outer shell YKK waterproof zippers are used on all exterior closures CE-rated armor in the shoulders and elbows plus an EVA foam back pad Two 10” chest intake vents, two 8” arm pit vents, two 10” back exhaust vents plus two 9-1/2” sleeve cuff vents Inside the storm flap is a security pocket with a red slider for visibility Concealed under the front pockets is the Cargo Storage System Clip-on bungee lanyard for keys Reflective panels on the front, side arm and back Thermoneck extends up the neck and chin and stows back into the jacket when not in use Lined with soft-to-the-touch fleece Removable, insulated, fully-sleeved internal liner Phone pocket on the left side and a map/cargo pocket on the right side Jacket-to-pant 10” full conjunction zipper can be sewn onto your favorite pair of pants

FIRSTGEAR KILIMANJARO JACKET

Mon, 21 May 2012 03:13:20 +0000

HYPERTEX™ waterproof and breathable outer shell made of high density 600 denier polyester with removable inner jacket liner (see features below) CE armor in the elbows and shoulders; EVA dense foam back pad Exterior shoulders and elbows heavily reinforced with 640 denier nylon to resist abrasion Two 9” chest intake vents, two 8” armpit intake vents and a 13” rear exhaust vent Double storm flag front with snap closure over a #8 YKK Vision two-way zipper, rain gutter and placket Napoleon pocket with red slider for easy visibility 2 chest flap pockets utilizing waterproof zippers and hook-and-loop closures 2 front lower patch pockets with envelope closures 2 side entry pockets protected by waterproof zippers Collar is lined with soft touch stretch fabric for a comfortable, flexible fit 1 time adjustable waist belt with hook-and-loop closure 3 position adjustable arm compression straps secured by snaps Adjustable cuff closures Elbow bends and armpits feature waterproof and breathable stretch fabric Interior pockets

FIRSTGEAR TPG MONARCH WOMENS JACKET

Mon, 21 May 2012 03:13:20 +0000

D30 intelligent shock absorption in the shoulders and elbows provides superior protection Hypertex Plus 100% 600 denier nylon waterproof and breathable outer shell material keeps rain outside, but allows inside humidity to escape Kevlar reinforced Teramid underlay at the crucial first point of contact on the shoulders and elbows to keep your skin safe from the road Six vents - two 8” chest vents with cord locks to securely hold them open for airflow, two 9” sleeve cuff vents with 2-way zippers to regulate volume and two 9” rear exhaust vents Four front cargo pockets, two chest pockets, two front side pockets (Left side contains a port for heated apparel power cord or headphones) Key pocket on the left sleeve plus a large rear storage with a 13” opening Under-the-helmet rain hood Integrated in the collar Reflective panels on the front, side, arm and back keep you visible at night Adjustable waist and arm straps and a drop-tail design ensures the jacket will not ride up in the sitting position The main front, 2-way YKK zipper is shielded from moisture by a double storm flap with rain gutter, held in place by spring-snap closures Security pocket with a red slider for visibility inside the storm flap Loop at the center back of the jacket for an L.E.D. accessory light (sold separately) Jacket-to-pant 10” full conjunction zipper fits easily through zipped liner portal and can be sewn onto your favorite pair of riding pants Standalone 3-layer laminate that is water and windproof and micro fleece lined jacket included as a zip-in liner Phone pocket on the left side and a map/cargo pocket on right side in both the liner and the jacket

FIRSTGEAR TPG TETON JACKET

Mon, 21 May 2012 03:13:20 +0000

D30 intelligent shock absorption in the shoulders and elbows provides superior protection Hypertex Plus 100% 600 denier nylon waterproof and breathable outer shell material keeps rain outside, but allows inside humidity to escape Kevlar reinforced Teramid underlay at the crucial first point of contact on the shoulders and elbows to keep your skin safe from the road Six vents - two 8” chest vents with cord locks to securely hold them open for airflow, two 9” sleeve cuff vents with 2-way zippers to regulate volume and two 9” rear exhaust vents Four front cargo pockets, two chest pockets, two front side pockets (Left side contains a port for heated apparel power cord or headphones) Key pocket on the left sleeve plus a large rear storage with a 13” opening Under-the-helmet rain hood Integrated in the collar Reflective panels on the front, side, arm and back keep you visible at night Adjustable waist and arm straps and a drop-tail design ensures the jacket will not ride up in the sitting position The main front, 2-way YKK® zipper is shielded from moisture by a double storm flap with rain gutter, held in place by spring-snap closures Security pocket with a red slider for visibility inside the storm flap Loop at the center back of the jacket for an L.E.D. accessory light (sold separately) Jacket-to-pant 10” full conjunction zipper fits easily through zipped liner portal and can be sewn onto your favorite pair of riding pants Standalone 3-layer laminate that is water and windproof and micro fleece lined jacket included as a zip-in liner Phone pocket on the left side and a map/cargo pocket on right side in both the liner and the jacket

FIRSTGEAR TPG TETON JACKET

Mon, 21 May 2012 03:13:20 +0000

d3o intelligent shock absorption in the shoulders and elbows provides superior protection and Hypertex Plus waterproof and breathable 100% 600 denier nylon Kevlar reinforced Teramid underlay shoulders and elbows Six vents and YKK and RiRi waterproof zippers Two chest pockets, two front side (Left side contains a port for heated apparel power cord or headphones) and key pocket on the left sleeve Under-the-helmet rain hood integrated in the collar and reflective panels on the front, side, arm and back Adjustable waist and arm straps with 3” drop-tail design with inside the storm flap on the left side is a security pocket Loop at the center back of the jacket for an L.E.D. accessory light (sold separately) Jacket-to-pant 10” full conjunction zipper can be sewn onto your favorite pair of riding pants Stand-alone 3-layer laminate windproof and micro fleece lined jacket included as a zip-in liner Phone pocket on the left side and a map/cargo pocket on the right side

MSR ASSAULT PURPLE

Mon, 21 May 2012 03:13:20 +0000

Aerodynamic, precision molded, ABS shell with molded-in mouth guard ribbing for increased structural integrity Custom graphics with a high gloss, UV coated finish Comfortable, “Quick Snap” liner is easily removable and washable Impact resistant adjustable visor DOT approved, weight: 3.3-3.5 lbs/1.49-1.59 kg

MSR ASSAULT GREEN

Mon, 21 May 2012 03:13:20 +0000

MSR ASSAULT RED

Mon, 21 May 2012 03:13:20 +0000

MSR ASSAULT FORTY

Mon, 21 May 2012 03:13:20 +0000

MSR ASSAULT CYAN

Mon, 21 May 2012 03:13:20 +0000

MSR VELOCITY ROCKSTAR

Mon, 21 May 2012 03:13:20 +0000

Light-weight precision molded, carbon fiber/Kevlar shell with molded-in dome crests for increased structural integrity Custom graphics with a high gloss, UV coated finish Comfortable, color matched "quick snap" liner is easily removable and washable Snap-on cheek pads are removable and washable SNELL and DOT approved, weight: 3.15lbs/1.43kg

MSR VELOCITY METAL MULISHA

Mon, 21 May 2012 03:13:20 +0000

MSR VELOCITY BLACK

Mon, 21 May 2012 03:13:20 +0000

MSR VELOCITY RED

Mon, 21 May 2012 03:13:20 +0000

MSR VELOCITY SCAN

Mon, 21 May 2012 03:13:20 +0000

MSR VELOCITY FRACTURE

Mon, 21 May 2012 03:13:20 +0000

MSR VELOCITY NXT SPRING

Mon, 21 May 2012 03:13:20 +0000

ANSWER NOVA SYNCHRON

Mon, 21 May 2012 03:13:20 +0000

Features injection molded ABS shell, adjustable visor and goggle pads Vibrant graphics with UV clear coat in popular colorways to match any gear Full EPS lined, including chin bar provides superior protection Meets or exceeds DOT standards Snap-in liner is removable/washable and made with moisture wicking fabrics Multiple front air intakes with rear exhaust venting keeps head cool and dry

ANSWER NOVA ION

Mon, 21 May 2012 03:13:20 +0000

ANSWER COMET ROCKSTAR

Mon, 21 May 2012 03:13:21 +0000

The Comet helmet model features an all new aerodynamic shell with multiple air intake and exhaust vents for cool air circulation, injection molded visor and new, hi-flow mouth vent design. Answer's secure-lock liner and new contoured check pads incorporate a snap system for ease of removal and features plush aero-cool and airmesh fabrics.

SCORPION EXO-1100 PRECIOSA BLACK

Mon, 21 May 2012 03:13:21 +0000

Fiberglass/Kevlar™ Matrix Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection.
AirFit® permits a rider to personalize helmet fit through air adjustable cheek pads.
SpeedView® an internal retractable light smoke sun visor that eases eye strain instantly in varying light conditions without changing face shields, plus an EverClear® coating on both sides for a fog free ride.
SpeedShift® quick-change shield system (patent pending): Easy, secure tool-less faceshield changes in ten seconds or less.
EverClear® no-fog faceshield: Optically-correct shield with state-of-the art fog-free technology and anti-scratch hardened coating.
KwikWickII® moisture-wicking helmet liner and cheek pads: Breathable, easily removable and washable.
Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet.
Breath-deflector: Enhanced fog-free performance.
ECE 22.05/DOT Certified.

SCORPION EXO-1100 PRECIOSA VIOLET

Mon, 21 May 2012 03:13:21 +0000

Fiberglass/Kevlar™ Matrix Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection.
AirFit® permits a rider to personalize helmet fit through air adjustable cheek pads.
SpeedView® an internal retractable light smoke sun visor that eases eye strain instantly in varying light conditions without changing face shields, plus an EverClear® coating on both sides for a fog free ride.
SpeedShift® quick-change shield system (patent pending): Easy, secure tool-less faceshield changes in ten seconds or less.
EverClear® no-fog faceshield: Optically-correct shield with state-of-the art fog-free technology and anti-scratch hardened coating.
KwikWickII® moisture-wicking helmet liner and cheek pads: Breathable, easily removable and washable.
Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet.
Breath-deflector: Enhanced fog-free performance.
ECE 22.05/DOT Certified.

ANSWER COMET ALPHA AIR

Mon, 21 May 2012 03:13:21 +0000

ANSWER COMET WIRED

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-1100 FREEDOM

Mon, 21 May 2012 03:13:21 +0000

Fiberglass/Kevlar™ Matrix Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection.
AirFit® permits a rider to personalize helmet fit through air adjustable cheek pads.
SpeedView® an internal retractable light smoke sun visor that eases eye strain instantly in varying light conditions without changing face shields, plus an EverClear® coating on both sides for a fog free ride.
SpeedShift® quick-change shield system (patent pending): Easy, secure tool-less faceshield changes in ten seconds or less.
EverClear® no-fog faceshield: Optically-correct shield with state-of-the art fog-free technology and anti-scratch hardened coating.
KwikWickII® moisture-wicking helmet liner and cheek pads: Breathable, easily removable and washable.
Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet.
Breath-deflector: Enhanced fog-free performance.
ECE 22.05/DOT Certified.

SCORPION EXO-1100 KRANIUM

Mon, 21 May 2012 03:13:21 +0000

Fiberglass/Kevlar™ Matrix Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection.
AirFit® permits a rider to personalize helmet fit through air adjustable cheek pads.
SpeedView® an internal retractable light smoke sun visor that eases eye strain instantly in varying light conditions without changing face shields, plus an EverClear® coating on both sides for a fog free ride.
SpeedShift® quick-change shield system (patent pending): Easy, secure tool-less faceshield changes in ten seconds or less.
EverClear® no-fog faceshield: Optically-correct shield with state-of-the art fog-free technology and anti-scratch hardened coating.
KwikWickII® moisture-wicking helmet liner and cheek pads: Breathable, easily removable and washable.
Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet.
Breath-deflector: Enhanced fog-free performance.
ECE 22.05/DOT Certified.

ANSWER COMET SHRED

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-1100 STRET DEMON GREY

Mon, 21 May 2012 03:13:21 +0000

Fiberglass/Kevlar™ Matrix Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection.
AirFit® permits a rider to personalize helmet fit through air adjustable cheek pads.
SpeedView® an internal retractable light smoke sun visor that eases eye strain instantly in varying light conditions without changing face shields, plus an EverClear® coating on both sides for a fog free ride.
SpeedShift® quick-change shield system (patent pending): Easy, secure tool-less faceshield changes in ten seconds or less.
EverClear® no-fog faceshield: Optically-correct shield with state-of-the art fog-free technology and anti-scratch hardened coating.
KwikWickII® moisture-wicking helmet liner and cheek pads: Breathable, easily removable and washable.
Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet.
Breath-deflector: Enhanced fog-free performance.
ECE 22.05/DOT Certified.

ANSWER COMET DOTCOM

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-1100 STREET DEMON BLUE

Mon, 21 May 2012 03:13:21 +0000

Fiberglass/Kevlar™ Matrix Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection.
AirFit® permits a rider to personalize helmet fit through air adjustable cheek pads.
SpeedView® an internal retractable light smoke sun visor that eases eye strain instantly in varying light conditions without changing face shields, plus an EverClear® coating on both sides for a fog free ride.
SpeedShift® quick-change shield system (patent pending): Easy, secure tool-less faceshield changes in ten seconds or less.
EverClear® no-fog faceshield: Optically-correct shield with state-of-the art fog-free technology and anti-scratch hardened coating.
KwikWickII® moisture-wicking helmet liner and cheek pads: Breathable, easily removable and washable.
Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet.
Breath-deflector: Enhanced fog-free performance.
ECE 22.05/DOT Certified.

ANSWER COMET HAZE

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-1100 STREET DEMON RED

Mon, 21 May 2012 03:13:21 +0000

Fiberglass/Kevlar™ Matrix Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection.
AirFit® permits a rider to personalize helmet fit through air adjustable cheek pads.
SpeedView® an internal retractable light smoke sun visor that eases eye strain instantly in varying light conditions without changing face shields, plus an EverClear® coating on both sides for a fog free ride.
SpeedShift® quick-change shield system (patent pending): Easy, secure tool-less faceshield changes in ten seconds or less.
EverClear® no-fog faceshield: Optically-correct shield with state-of-the art fog-free technology and anti-scratch hardened coating.
KwikWickII® moisture-wicking helmet liner and cheek pads: Breathable, easily removable and washable.
Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet.
Breath-deflector: Enhanced fog-free performance.
ECE 22.05/DOT Certified.

SCORPION EXO-1100 HYPER SILVER

Mon, 21 May 2012 03:13:21 +0000

Fiberglass/Kevlar™ Matrix Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection.
AirFit® permits a rider to personalize helmet fit through air adjustable cheek pads.
SpeedView® an internal retractable light smoke sun visor that eases eye strain instantly in varying light conditions without changing face shields, plus an EverClear® coating on both sides for a fog free ride.
SpeedShift® quick-change shield system (patent pending): Easy, secure tool-less faceshield changes in ten seconds or less.
EverClear® no-fog faceshield: Optically-correct shield with state-of-the art fog-free technology and anti-scratch hardened coating.
KwikWickII® moisture-wicking helmet liner and cheek pads: Breathable, easily removable and washable.
Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet.
Breath-deflector: Enhanced fog-free performance.
ECE 22.05/DOT Certified.

SCORPION EXO-1100 MATTE BLACK

Mon, 21 May 2012 03:13:21 +0000

Fiberglass/Kevlar™ Matrix Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection.
AirFit® permits a rider to personalize helmet fit through air adjustable cheek pads.
SpeedView® an internal retractable light smoke sun visor that eases eye strain instantly in varying light conditions without changing face shields, plus an EverClear® coating on both sides for a fog free ride.
SpeedShift® quick-change shield system (patent pending): Easy, secure tool-less faceshield changes in ten seconds or less.
EverClear® no-fog faceshield: Optically-correct shield with state-of-the art fog-free technology and anti-scratch hardened coating.
KwikWickII® moisture-wicking helmet liner and cheek pads: Breathable, easily removable and washable.
Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet.
Breath-deflector: Enhanced fog-free performance.
ECE 22.05/DOT Certified.

SCORPION EXO-1100 BLACK

Mon, 21 May 2012 03:13:21 +0000

Fiberglass/Kevlar™ Matrix Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection.
AirFit® permits a rider to personalize helmet fit through air adjustable cheek pads.
SpeedView® an internal retractable light smoke sun visor that eases eye strain instantly in varying light conditions without changing face shields, plus an EverClear® coating on both sides for a fog free ride.
SpeedShift® quick-change shield system (patent pending): Easy, secure tool-less faceshield changes in ten seconds or less.
EverClear® no-fog faceshield: Optically-correct shield with state-of-the art fog-free technology and anti-scratch hardened coating.
KwikWickII® moisture-wicking helmet liner and cheek pads: Breathable, easily removable and washable.
Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet.
Breath-deflector: Enhanced fog-free performance.
ECE 22.05/DOT Certified.

SCORPION VX-24 IMPACT

Mon, 21 May 2012 03:13:21 +0000

Scorpion VX-24 Graphic Helmets are equipped with trademarked AirFit technology taken from top of the line road racing helmets and adapted to the off-road segment. Scorpion constructs stylish helmets with the best features. Deep rich graphics make the VX-24 one of the most attractive helmets out there and suits either the bold or old racer! A new chin bar, rubber nose roost shield now deflects more debris without reducing the generous goggle/eye port area. The large eye port fits all goggles and provides maximum visibility. Life is too short for traffic, take the Scorpion VX-24 helmet out for a spin on a dirt bike trail!

SCORPION VX-24 VORTECH

Mon, 21 May 2012 03:13:21 +0000

SCORPION VX-24 HELLRAISER

Mon, 21 May 2012 03:13:21 +0000

SCORPION VX-24 AMPT

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-400 SKULL BUCKET

Mon, 21 May 2012 03:13:21 +0000

Scorpion EXO-400 Graphic Helmets are quiet with an aero-tuned design for wind-tunnel tested comfort. Scorpion gave the EXO-400 sharp graphics that compliment the helmet design. The EXO-400 has adjustable, indexed front and rear vents with an aero-tuned rear spoiler that reduces lift, creates vacuum and maximizes airflow through the helmet. If you need a full face helmet with ample ventilation you came to the right place! The EXO-400 has an aerodynamic design with ventilation for an aggressive sport riding position. The Scorpion EXO-400 full face helmet is perfect for fast and slow paced riders.

SCORPION EXO-400 URBAN DESTROYER

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-400 SPRING CHAMELEON

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-400 RAPTURE

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-400 LILLY

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-400 SOLIDS

Mon, 21 May 2012 03:13:21 +0000

EXO-400 Solid Helmets are Scorpion's entry level full-face helmet. Whether you are a first-time rider or have been riding for years, you will have trouble finding another helmet that offers this much bang for your buck! The EXO-400 has an optically-correct shield with state-of-the art fog-free technology. A breath-deflector enhances fog-free performance and makes vision superb in all riding conditions. Scorpion’s SpeedShift shield system makes changing your face shield quick and effortless. Be bold and customize your EXO-400 helmet! Custom liner and cheek pad kits are available in hot colors and wild graphics!. The Scorpion EXO-400 makes choosing the right full-face helmet a piece of cake!

SCORPION EXO-500 ARDENT

Mon, 21 May 2012 03:13:21 +0000

Scorpion EXO-500 Graphic Helmets are packed with all the high-end features you crave! You will not break a sweat in the EXO-500, the ventilation system circulates fresh air continuously allowing the rider to stay comfortable. Having the snuggest fit is of critical importance when wearing a helmet. A pump-and-release button inflates the cheek pads to ensure a custom fit. The EXO-500 comes in cool graphic designs that are perfect for riders not looking to break the bank. The Scorpion EXO-500 Helmet is going to be the leading choice for the aggressive street rider and long-distance sport tourer.

SCORPION EXO-500 OIL

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-500 BIOMETAL

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-500 SOLIDS

Mon, 21 May 2012 03:13:21 +0000

The Scorpion EXO-500 Solid Helmet caters to motorcyclists seeking a comfortable, protective, high-performance helmet. Scorpion made the EXO-500 lighter so you no longer have to fear wearing a heavy helmet for long distances. AirFit permits a rider to personalize the helmet fit through air adjustable cheek pads. An internal and retractable sun visor eases eye strain instantly in varying light conditions without changing face shields. The EverClear no-fog face shield is a hidden gem that can easily be changed from clear to smoke when the sun is too bright. The Scorpion EXO-500 Helmet allows you to focus on your surroundings and stay safe on the road.

SCORPION EXO-700 HOLLYWOOD

Mon, 21 May 2012 03:13:21 +0000

The Scorpion EXO-700 graphics offer a diverse collection of styles and designs that do not disappoint! The Scorpion EXO-700 graphic designs include everything from wacky stripes and bright colors to feminine floral patterns. The EXO-700 helmet is a great way to get a top of the line, full face, Snell rated helmet for rock bottom pricing. The fiberglass Kevlar shell allows for an easy, lightweight and comfortable fit. With such great features as their exclusive SpeedShift shield system and KwikWick moisture reducer it's hard not to love these graphics! The Scorpion EXO-700 exceeds all expectations set for full face motorcycle helmets: it feels great, it looks great and it costs less! Get your Scorpion EXO-700 graphic today!

SCORPION EXO-700 FIORE

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-700 ENGINE

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-700 PREDATOR

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-700 SOLIDS

Mon, 21 May 2012 03:13:21 +0000

The Scorpion EXO-700 solid motorcycle helmets offer all the great qualities you expect from a full face helmet. The Scorpion EXO-700 helmet offers a great fit with a fog decreasing, quick change shield system and an adjustable ventilation system. All these features come along with a Snell/Dot certification for a fantastic price. The Scorpion EXO-700 solid colors available include Black, Dark Silver, Matte Black, Silver, White and Neon! Where else other than from Scorpion can you find a neon full face helmet fully loaded with features?! The Scorpion EXO-700 is also available in several great graphics, just as diverse and lovable as their Neon solid counterpart.

SCORPION EXO-750 KINGDOM

Mon, 21 May 2012 03:13:21 +0000

Scorpion EXO-750 Graphic Helmets exemplify life in the fast lane. Why turn your head when you can turn every one's around you? The EXO-750 helmet, their rebellious style graphics, will do that and more! The EXO-750 is also available in a more subtle graphic design that exudes a vintage feel. The vintage version comes in a classic black & white with gold trim or a tricolor red, white and green colorway. The EXO-750 is not just a helmet - it is an attitude. Hit the open road with a Scorpion EXO-750 motorcycle helmet and forget what you do for a living. Pick a destination and go!

SCORPION EXO-750 LIVE FAST ORANGE

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-750 ETERNITY

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-750 VINTAGE

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-750 SOLIDS

Mon, 21 May 2012 03:13:21 +0000

Scorpion EXO-750 Solid Helmets pack in features at an affordable price. Modern day motorcyclists will enjoy the solid matte black and hyper silver colors available. The upgrades are what really set the EXO-750 apart from any other helmet. A face shield lock/vent mechanism ensures a secure seal in the closed position or open it slightly for additional air. Change your face shield in ten seconds or less with the SpeedShift feature. Pick a destination and live in the fast lane with the Scorpion EXO-750 solid helmet!

SCORPION EXO-900 TRANSFORMER

Mon, 21 May 2012 03:13:21 +0000

The Scorpion EXO-900 helmet presents options with a unique twist that no other modular helmet can provide. Scorpion generated a transforming helmet that can be quickly converted into a full-face or open-face helmet. In seconds and with no tools, you can convert your EXO-900 helmet to meet changing riding conditions or style preferences.

SCORPION EXO-1100 RPM

Mon, 21 May 2012 03:13:21 +0000

Scorpion EXO-1100 Helmets are more refined, feature packed, and lighter than its predecessor. The EXO-1100 Helmet is the new replacement for the popular EXO-1000 and the upgrades are noticeable right from the get-go. First off before anything else, the Scorpion EXO-1100 Helmet features DOT and ECE22.05 certification rather than the DOT/Snell rating. ECE provides an extreme degree of protection, but allows for significant weight savings. As a result, you get a lightweight helmet with high performance.

SCORPION EXO-1100 SUBLIMINAL

Mon, 21 May 2012 03:13:21 +0000

SCORPION EXO-1100 SOLIDS

Mon, 21 May 2012 03:13:21 +0000

ARAI VECTOR-2 BLACK FROST

Mon, 21 May 2012 03:13:21 +0000

Exclusive 5mm Peel-away Temple Pad Layer:

The Arai Vector-2 also adds the new 5mm peel-away layer to the removable interior comfort liner's temple pad, giving you another level of customization no other helmet brand offers.

Exclusive 5mm Peel-away Cheekpad Layer:

Giving you even more ability to craft the perfect fit and comfort for your face, the cheekpads now feature a 5mm peel-away layer for added room if needed.

Extreme Peripheral View:

Same wider feld of side-to-side visibility as the Corsair V racing helmet and Arai RX-Q.

Improved Ventilation:

The new ACF-2 front intake vent has an oversized intake opening for better airflow, and a sliding-door mechanism to more completely close it. The placement of the new chinvent design within the Vector 2's chinbar gives it a distinctive look all its own - while flowing a lot of air into the interior.

Tuned Rear Vent/Wing:

New ACR-2 rear exhaust vent- wing combo: Wind-tunnel tuned air inlets markedly improve interior ventilation and heat removal.

Removable, Washable Liner:

An upgrade to the old Arai Vector's fixed liner, the fully removable, washable, and replaceable interior comfort- liner also comes in optional sizes to micro-fit your helmet to your head. Furthermore, it is designed with a full-perimeter crown pad with minimal frame support for increased comfort The removable/ replaceable cheekpads also have removable washable covers for easier, thorough cleaning.

Hyper-Ridge Band:

This newly-sculpted lower reinforcement band provides stability and a lower center of gravity for a very lightweight feeling. Large side exhaust ports increase airfow while minimizing noise levels. And the larger bottom opening makes for easier on-off.

Meets or exceeds Snell + D.O.T. standards.

ARAI VX-PRO 3 AKIRA

Mon, 21 May 2012 03:13:21 +0000

Arai VX-Pro III Graphic Motorcycle Helmets were redesigned to be more functional with comfort and fit like no other. Wearing a helmet that is hot with poor ventilation can be unbearable but a combination of vents and exhausts ensures the temperature in the helmet is always comfortable. The VX-Pro III has developed a new tilt system that makes the helmet more spacious and allows you to see the track and other riders better. Arai developed a new rounded chin bar that is less likely to get caught on other riders.

ARAI VX-PRO 3 SAMURAI

Mon, 21 May 2012 03:13:21 +0000

ARAI VX-PRO 3 OSBORNE

Mon, 21 May 2012 03:13:21 +0000

ARAI VX-PRO 3 RUSSELL

Mon, 21 May 2012 03:13:21 +0000

ARAI VX-PRO 3 CRUTCHLOW

Mon, 21 May 2012 03:13:21 +0000

ARAI VECTOR-2 NEEVSEY

Mon, 21 May 2012 03:13:21 +0000

Exclusive 5mm Peel-away Temple Pad Layer:

The Arai Vector-2 also adds the new 5mm peel-away layer to the removable interior comfort liner's temple pad, giving you another level of customization no other helmet brand offers.

Exclusive 5mm Peel-away Cheekpad Layer:

Giving you even more ability to craft the perfect fit and comfort for your face, the cheekpads now feature a 5mm peel-away layer for added room if needed.

Extreme Peripheral View:

Same wider feld of side-to-side visibility as the Corsair V racing helmet and Arai RX-Q.

Improved Ventilation:

The new ACF-2 front intake vent has an oversized intake opening for better airflow, and a sliding-door mechanism to more completely close it. The placement of the new chinvent design within the Vector 2's chinbar gives it a distinctive look all its own - while flowing a lot of air into the interior.

Tuned Rear Vent/Wing:

New ACR-2 rear exhaust vent- wing combo: Wind-tunnel tuned air inlets markedly improve interior ventilation and heat removal.

Removable, Washable Liner:

An upgrade to the old Arai Vector's fixed liner, the fully removable, washable, and replaceable interior comfort- liner also comes in optional sizes to micro-fit your helmet to your head. Furthermore, it is designed with a full-perimeter crown pad with minimal frame support for increased comfort The removable/ replaceable cheekpads also have removable washable covers for easier, thorough cleaning.

Hyper-Ridge Band:

This newly-sculpted lower reinforcement band provides stability and a lower center of gravity for a very lightweight feeling. Large side exhaust ports increase airfow while minimizing noise levels. And the larger bottom opening makes for easier on-off.

Meets or exceeds Snell + D.O.T. standards.

ARAI VX-PRO 3 WARFARE

Mon, 21 May 2012 03:13:21 +0000

ARAI VX-PRO 3 MOTION

Mon, 21 May 2012 03:13:21 +0000

ARAI VECTOR-2 ID

Mon, 21 May 2012 03:13:21 +0000

Exclusive 5mm Peel-away Temple Pad Layer:

The Arai Vector-2 also adds the new 5mm peel-away layer to the removable interior comfort liner's temple pad, giving you another level of customization no other helmet brand offers.

Exclusive 5mm Peel-away Cheekpad Layer:

Giving you even more ability to craft the perfect fit and comfort for your face, the cheekpads now feature a 5mm peel-away layer for added room if needed.

Extreme Peripheral View:

Same wider feld of side-to-side visibility as the Corsair V racing helmet and Arai RX-Q.

Improved Ventilation:

The new ACF-2 front intake vent has an oversized intake opening for better airflow, and a sliding-door mechanism to more completely close it. The placement of the new chinvent design within the Vector 2's chinbar gives it a distinctive look all its own - while flowing a lot of air into the interior.

Tuned Rear Vent/Wing:

New ACR-2 rear exhaust vent- wing combo: Wind-tunnel tuned air inlets markedly improve interior ventilation and heat removal.

Removable, Washable Liner:

An upgrade to the old Arai Vector's fixed liner, the fully removable, washable, and replaceable interior comfort- liner also comes in optional sizes to micro-fit your helmet to your head. Furthermore, it is designed with a full-perimeter crown pad with minimal frame support for increased comfort The removable/ replaceable cheekpads also have removable washable covers for easier, thorough cleaning.

Hyper-Ridge Band:

This newly-sculpted lower reinforcement band provides stability and a lower center of gravity for a very lightweight feeling. Large side exhaust ports increase airfow while minimizing noise levels. And the larger bottom opening makes for easier on-off.

Meets or exceeds Snell + D.O.T. standards.

ARAI VX-PRO 3 SOLIDS

Mon, 21 May 2012 03:13:21 +0000

The Arai VX-Pro III Solid Motorcycle Helmet is one of the most highly rated off-road helmets. Arai improved the VX-Pro III with added innovative safety features. Emergency-release cheek pads slide out easily allowing medical technicians access to an unconscious or injured rider. The chinbar area has a smooth radius to help reduce snagging or digging during a spill. Shell recesses allow goggles to have a better fit and seal on rider’s face. For dusty or cold conditions, the new ventilation system contains vents that are adjustable and fully close-able. Ride in confidence with the new Arai VX-Pro III motorcycle helmet.

ARAI VECTOR-2 THRILL

Mon, 21 May 2012 03:13:21 +0000

Exclusive 5mm Peel-away Temple Pad Layer:

The Arai Vector-2 also adds the new 5mm peel-away layer to the removable interior comfort liner's temple pad, giving you another level of customization no other helmet brand offers.

Exclusive 5mm Peel-away Cheekpad Layer:

Giving you even more ability to craft the perfect fit and comfort for your face, the cheekpads now feature a 5mm peel-away layer for added room if needed.

Extreme Peripheral View:

Same wider feld of side-to-side visibility as the Corsair V racing helmet and Arai RX-Q.

Improved Ventilation:

The new ACF-2 front intake vent has an oversized intake opening for better airflow, and a sliding-door mechanism to more completely close it. The placement of the new chinvent design within the Vector 2's chinbar gives it a distinctive look all its own - while flowing a lot of air into the interior.

Tuned Rear Vent/Wing:

New ACR-2 rear exhaust vent- wing combo: Wind-tunnel tuned air inlets markedly improve interior ventilation and heat removal.

Removable, Washable Liner:

An upgrade to the old Arai Vector's fixed liner, the fully removable, washable, and replaceable interior comfort- liner also comes in optional sizes to micro-fit your helmet to your head. Furthermore, it is designed with a full-perimeter crown pad with minimal frame support for increased comfort The removable/ replaceable cheekpads also have removable washable covers for easier, thorough cleaning.

Hyper-Ridge Band:

This newly-sculpted lower reinforcement band provides stability and a lower center of gravity for a very lightweight feeling. Large side exhaust ports increase airfow while minimizing noise levels. And the larger bottom opening makes for easier on-off.

Meets or exceeds Snell + D.O.T. standards.

ARAI VECTOR-2 LAUNCH

Mon, 21 May 2012 03:13:21 +0000

Exclusive 5mm Peel-away Temple Pad Layer:

The Arai Vector-2 also adds the new 5mm peel-away layer to the removable interior comfort liner's temple pad, giving you another level of customization no other helmet brand offers.

Exclusive 5mm Peel-away Cheekpad Layer:

Giving you even more ability to craft the perfect fit and comfort for your face, the cheekpads now feature a 5mm peel-away layer for added room if needed.

Extreme Peripheral View:

Same wider feld of side-to-side visibility as the Corsair V racing helmet and Arai RX-Q.

Improved Ventilation:

The new ACF-2 front intake vent has an oversized intake opening for better airflow, and a sliding-door mechanism to more completely close it. The placement of the new chinvent design within the Vector 2's chinbar gives it a distinctive look all its own - while flowing a lot of air into the interior.

Tuned Rear Vent/Wing:

New ACR-2 rear exhaust vent- wing combo: Wind-tunnel tuned air inlets markedly improve interior ventilation and heat removal.

Removable, Washable Liner:

An upgrade to the old Arai Vector's fixed liner, the fully removable, washable, and replaceable interior comfort- liner also comes in optional sizes to micro-fit your helmet to your head. Furthermore, it is designed with a full-perimeter crown pad with minimal frame support for increased comfort The removable/ replaceable cheekpads also have removable washable covers for easier, thorough cleaning.

Hyper-Ridge Band:

This newly-sculpted lower reinforcement band provides stability and a lower center of gravity for a very lightweight feeling. Large side exhaust ports increase airfow while minimizing noise levels. And the larger bottom opening makes for easier on-off.

Meets or exceeds Snell + D.O.T. standards.

ARAI XD-3 CONTRAST

Mon, 21 May 2012 03:13:21 +0000

The Arai XD-3 Graphic motorcycle helmets offer the same style and superior design that is so well loved in the XD-3 solid helmets to irresistible effect. The Arai XD-3 graphic helmets offer the same great Crossover Design which allows the rider to easily change an off-road helmet to a full-face helmet. Arai XD-3 Graphics come in a LWD and Luster graphics in several great colors. The Arai XD-3 features a high-flow peak which channels air directly into the front vents in addition to four top vents designed specifically to draw significant volumes of air from the inside of the helmet.

ARAI VECTOR-2 MARKER BLACK

Mon, 21 May 2012 03:13:21 +0000

Exclusive 5mm Peel-away Temple Pad Layer:

The Arai Vector-2 also adds the new 5mm peel-away layer to the removable interior comfort liner's temple pad, giving you another level of customization no other helmet brand offers.

Exclusive 5mm Peel-away Cheekpad Layer:

Giving you even more ability to craft the perfect fit and comfort for your face, the cheekpads now feature a 5mm peel-away layer for added room if needed.

Extreme Peripheral View:

Same wider feld of side-to-side visibility as the Corsair V racing helmet and Arai RX-Q.

Improved Ventilation:

The new ACF-2 front intake vent has an oversized intake opening for better airflow, and a sliding-door mechanism to more completely close it. The placement of the new chinvent design within the Vector 2's chinbar gives it a distinctive look all its own - while flowing a lot of air into the interior.

Tuned Rear Vent/Wing:

New ACR-2 rear exhaust vent- wing combo: Wind-tunnel tuned air inlets markedly improve interior ventilation and heat removal.

Removable, Washable Liner:

An upgrade to the old Arai Vector's fixed liner, the fully removable, washable, and replaceable interior comfort- liner also comes in optional sizes to micro-fit your helmet to your head. Furthermore, it is designed with a full-perimeter crown pad with minimal frame support for increased comfort The removable/ replaceable cheekpads also have removable washable covers for easier, thorough cleaning.

Hyper-Ridge Band:

This newly-sculpted lower reinforcement band provides stability and a lower center of gravity for a very lightweight feeling. Large side exhaust ports increase airfow while minimizing noise levels. And the larger bottom opening makes for easier on-off.

Meets or exceeds Snell + D.O.T. standards.

ARAI XD-3 BOSCH

Mon, 21 May 2012 03:13:21 +0000

ARAI VECTOR-2 MARKER RED

Mon, 21 May 2012 03:13:21 +0000

Exclusive 5mm Peel-away Temple Pad Layer:

The Arai Vector-2 also adds the new 5mm peel-away layer to the removable interior comfort liner's temple pad, giving you another level of customization no other helmet brand offers.

Exclusive 5mm Peel-away Cheekpad Layer:

Giving you even more ability to craft the perfect fit and comfort for your face, the cheekpads now feature a 5mm peel-away layer for added room if needed.

Extreme Peripheral View:

Same wider feld of side-to-side visibility as the Corsair V racing helmet and Arai RX-Q.

Improved Ventilation:

The new ACF-2 front intake vent has an oversized intake opening for better airflow, and a sliding-door mechanism to more completely close it. The placement of the new chinvent design within the Vector 2's chinbar gives it a distinctive look all its own - while flowing a lot of air into the interior.

Tuned Rear Vent/Wing:

New ACR-2 rear exhaust vent- wing combo: Wind-tunnel tuned air inlets markedly improve interior ventilation and heat removal.

Removable, Washable Liner:

An upgrade to the old Arai Vector's fixed liner, the fully removable, washable, and replaceable interior comfort- liner also comes in optional sizes to micro-fit your helmet to your head. Furthermore, it is designed with a full-perimeter crown pad with minimal frame support for increased comfort The removable/ replaceable cheekpads also have removable washable covers for easier, thorough cleaning.

Hyper-Ridge Band:

This newly-sculpted lower reinforcement band provides stability and a lower center of gravity for a very lightweight feeling. Large side exhaust ports increase airfow while minimizing noise levels. And the larger bottom opening makes for easier on-off.

Meets or exceeds Snell + D.O.T. standards.

ARAI XD-3 ADVENTURE

Mon, 21 May 2012 03:13:21 +0000

ARAI VECTOR-2 SCHWANTZ

Mon, 21 May 2012 03:13:21 +0000

Exclusive 5mm Peel-away Temple Pad Layer:

The Arai Vector-2 also adds the new 5mm peel-away layer to the removable interior comfort liner's temple pad, giving you another level of customization no other helmet brand offers.

Exclusive 5mm Peel-away Cheekpad Layer:

Giving you even more ability to craft the perfect fit and comfort for your face, the cheekpads now feature a 5mm peel-away layer for added room if needed.

Extreme Peripheral View:

Same wider feld of side-to-side visibility as the Corsair V racing helmet and Arai RX-Q.

Improved Ventilation:

The new ACF-2 front intake vent has an oversized intake opening for better airflow, and a sliding-door mechanism to more completely close it. The placement of the new chinvent design within the Vector 2's chinbar gives it a distinctive look all its own - while flowing a lot of air into the interior.

Tuned Rear Vent/Wing:

New ACR-2 rear exhaust vent- wing combo: Wind-tunnel tuned air inlets markedly improve interior ventilation and heat removal.

Removable, Washable Liner:

An upgrade to the old Arai Vector's fixed liner, the fully removable, washable, and replaceable interior comfort- liner also comes in optional sizes to micro-fit your helmet to your head. Furthermore, it is designed with a full-perimeter crown pad with minimal frame support for increased comfort The removable/ replaceable cheekpads also have removable washable covers for easier, thorough cleaning.

Hyper-Ridge Band:

This newly-sculpted lower reinforcement band provides stability and a lower center of gravity for a very lightweight feeling. Large side exhaust ports increase airfow while minimizing noise levels. And the larger bottom opening makes for easier on-off.

Meets or exceeds Snell + D.O.T. standards.

ARAI VECTOR-2 RACE RED

Mon, 21 May 2012 03:13:21 +0000

Exclusive 5mm Peel-away Temple Pad Layer:

The Arai Vector-2 also adds the new 5mm peel-away layer to the removable interior comfort liner's temple pad, giving you another level of customization no other helmet brand offers.

Exclusive 5mm Peel-away Cheekpad Layer:

Giving you even more ability to craft the perfect fit and comfort for your face, the cheekpads now feature a 5mm peel-away layer for added room if needed.

Extreme Peripheral View:

Same wider feld of side-to-side visibility as the Corsair V racing helmet and Arai RX-Q.

Improved Ventilation:

The new ACF-2 front intake vent has an oversized intake opening for better airflow, and a sliding-door mechanism to more completely close it. The placement of the new chinvent design within the Vector 2's chinbar gives it a distinctive look all its own - while flowing a lot of air into the interior.

Tuned Rear Vent/Wing:

New ACR-2 rear exhaust vent- wing combo: Wind-tunnel tuned air inlets markedly improve interior ventilation and heat removal.

Removable, Washable Liner:

An upgrade to the old Arai Vector's fixed liner, the fully removable, washable, and replaceable interior comfort- liner also comes in optional sizes to micro-fit your helmet to your head. Furthermore, it is designed with a full-perimeter crown pad with minimal frame support for increased comfort The removable/ replaceable cheekpads also have removable washable covers for easier, thorough cleaning.

Hyper-Ridge Band:

This newly-sculpted lower reinforcement band provides stability and a lower center of gravity for a very lightweight feeling. Large side exhaust ports increase airfow while minimizing noise levels. And the larger bottom opening makes for easier on-off.

Meets or exceeds Snell + D.O.T. standards.

ARAI VECTOR-2 FLOURESCENT YELLOW

Mon, 21 May 2012 03:13:21 +0000

Features SAI shield which is 5mm longer on each side
Multi-density 1-piece EPS liner
New, unique fully removable liner
New, unique removable cheek pads
New Hyper-Ridge botton molding for larger, stronger opening
New chin vent design and placement
Rubber breath guard and placement
Optional SAI max-vision Anti-fog shield and Anti-Fog Pinlock lens
DOT approved

ARAI XD-3 SOLIDS

Mon, 21 May 2012 03:13:21 +0000

The Arai XD-3 Solid motorcycle helmets introduce what Arai likes to call "Crossover Design". Arai XD-3 helmets appear to be an off-road motorcycle helmet at first glance, but they are so much more. The XD-3 helmet design allows for the owner to switch between activities and terrain without changing their helmet; the face shield can be retracted into the helmet, and the XD-3 can be turned into a full-face helmet with a simple and quick change of shield.

ARAI VECTOR-2 DIAMOND

Mon, 21 May 2012 03:13:21 +0000

Exclusive 5mm Peel-away Temple Pad Layer:

The Arai Vector-2 also adds the new 5mm peel-away layer to the removable interior comfort liner's temple pad, giving you another level of customization no other helmet brand offers.

Exclusive 5mm Peel-away Cheekpad Layer:

Giving you even more ability to craft the perfect fit and comfort for your face, the cheekpads now feature a 5mm peel-away layer for added room if needed.

Extreme Peripheral View:

Same wider feld of side-to-side visibility as the Corsair V racing helmet and Arai RX-Q.

Improved Ventilation:

The new ACF-2 front intake vent has an oversized intake opening for better airflow, and a sliding-door mechanism to more completely close it. The placement of the new chinvent design within the Vector 2's chinbar gives it a distinctive look all its own - while flowing a lot of air into the interior.

Tuned Rear Vent/Wing:

New ACR-2 rear exhaust vent- wing combo: Wind-tunnel tuned air inlets markedly improve interior ventilation and heat removal.

Removable, Washable Liner:

An upgrade to the old Arai Vector's fixed liner, the fully removable, washable, and replaceable interior comfort- liner also comes in optional sizes to micro-fit your helmet to your head. Furthermore, it is designed with a full-perimeter crown pad with minimal frame support for increased comfort The removable/ replaceable cheekpads also have removable washable covers for easier, thorough cleaning.

Hyper-Ridge Band:

This newly-sculpted lower reinforcement band provides stability and a lower center of gravity for a very lightweight feeling. Large side exhaust ports increase airfow while minimizing noise levels. And the larger bottom opening makes for easier on-off.

Meets or exceeds Snell + D.O.T. standards.

ARAI PROFILE TRIDENT

Mon, 21 May 2012 03:13:21 +0000

The Arai Profile full-face helmet features a long-oval fit. The Brow Vent Faceshield Ventilation System featured in the Arai Profile provides cooling air in the upper face area without having to have holes in the critical forehead area of the shell, or in the impact-absorbing liner material. Optically correct pre-formed faceshields in the Arai helmets Profile provide better vision and UV ray protection with less distortion.

ARAI PROFILE BANDA

Mon, 21 May 2012 03:13:22 +0000

ARAI PROFILE PASSION

Mon, 21 May 2012 03:13:22 +0000

ARAI PROFILE DYNAMIC

Mon, 21 May 2012 03:13:22 +0000

ARAI PROFILE SOLIDS

Mon, 21 May 2012 03:13:22 +0000

ARAI VECTOR-2 SOLIDS

Mon, 21 May 2012 03:13:22 +0000

Intermediate oval fit
Complex Laminate Construction (CLC) shell that combines excellent shell integrity with light weight
Arai's exclusive multi-density, single piece hybrid EPS liner
Brow Vent Faceshield Ventilation System provides cooling air in upper face area without holes in critical forehead area of the shell or in the impact-absorbing liner material
Extreme peripheral view - wider field of side to side visibility the same as the Corsair V and RX-Q
New tuned rear vent/wing - Air inlets provide improved interior ventilation and heat removal
Hyper-Ridge band - newly sculpted lower reinforcement band provides stability
Larger side exhaust ports to increase airflow and minimize noise
Dual pivot chin vent to direct air to the rider or the shield for de-misting
Reinforced shell ridges with integrated side exhaust vents
Larger bottom opening for easier on and off without compromising shell integrity
Removable/replaceable cheek pads with washable covers
Meets or exceeds Snell M2010 and D.O.T. standards

ARAI RX-Q URBAN BLACK

Mon, 21 May 2012 03:13:22 +0000

The RX-Q has an evolved version of Arai's very popular Intermediate-Oval (IO) interior shape. Arai is the only company offering multiple interior-fit packages to better conform to consumers' head shape as well as size. Its interior fit shapes evolve and improve as company research recognizes trends based on consumer feedback. The RX-Q shape is similar to the current Corsair-V and Vector models, and the former RX-7 Corsair, but the RX-Q's shape represents a further refinement of interior shape configuration based on Arai's continual comparison, measurement and testing of human head shapes. Extremely wide peripheral view for better visibility and awareness of the world around you.

ARAI RX-Q FLAG ITALY

Mon, 21 May 2012 03:13:22 +0000

ARAI RX-Q FLAG UK

Mon, 21 May 2012 03:13:22 +0000

ARAI RX-Q TALON

Mon, 21 May 2012 03:13:22 +0000

ARAI RX-Q SPENCER

Mon, 21 May 2012 03:13:22 +0000

ARAI RX-Q GOTHIC SILVER

Mon, 21 May 2012 03:13:22 +0000

ARAI RX-Q ORIENTAL

Mon, 21 May 2012 03:13:22 +0000

ARAI RX-Q ACE BLUE

Mon, 21 May 2012 03:13:22 +0000

ARAI RX-Q ACE RED

Mon, 21 May 2012 03:13:22 +0000

ARAI RX-Q DUETET

Mon, 21 May 2012 03:13:22 +0000

ARAI RX-Q GLAZE

Mon, 21 May 2012 03:13:22 +0000

ARAI RX-Q VANTAGE

Mon, 21 May 2012 03:13:22 +0000

ARAI RX-Q MAMOLA

Mon, 21 May 2012 03:13:22 +0000

ARAI SIGNET-Q MASK RED

Mon, 21 May 2012 03:13:22 +0000

Both the top vent set and side exhaust cowls are direct carryovers from the RX-Q
Brow vent ducting redirects to flow air across the temples
DDL-4 exhaust vent to the 10mm wider eye port (5mm on each side)
Long Oval Fit with the Arai Signet-Q
SAI MAX-Vision Brow Vent shield
Clear Pin Lock Max-Vision Brow Vent anti-fog lens Included with the helmet
Elongated shell adds 5mm from front to back
Long-Oval shape helps prevent Hot-Spot
Multi-Density Single piece EPS liner
Removable, replaceable, washable interior
Dry-Cool Surface material for rapid displacement of heat and moisture away from your head and into the Ventilation airflow for added comfort while riding and a quick dry between rides
5mm peel-away temple pads adds another level of customization, giving the helmet interior a little extra width when needed
Enhanced for customizable micro fitment interior without the need to purchase extra interior components
Arai Signet Q Solid has the New FCS (Facial Contour Support) cheek pad design
Innovative and exclusive spring support adds just the right amount of pressure when needed while being worn
Meets or exceeds Snell and D.O.T. standards

ARAI RX-Q SOLIDS

Mon, 21 May 2012 03:13:22 +0000

ARAI SIGNET-Q MASK BLACK

Mon, 21 May 2012 03:13:22 +0000

Both the top vent set and side exhaust cowls are direct carryovers from the RX-Q
Brow vent ducting redirects to flow air across the temples
DDL-4 exhaust vent to the 10mm wider eye port (5mm on each side)
Long Oval Fit with the Arai Signet-Q
SAI MAX-Vision Brow Vent shield
Clear Pin Lock Max-Vision Brow Vent anti-fog lens Included with the helmet
Elongated shell adds 5mm from front to back
Long-Oval shape helps prevent Hot-Spot
Multi-Density Single piece EPS liner
Removable, replaceable, washable interior
Dry-Cool Surface material for rapid displacement of heat and moisture away from your head and into the Ventilation airflow for added comfort while riding and a quick dry between rides
5mm peel-away temple pads adds another level of customization, giving the helmet interior a little extra width when needed
Enhanced for customizable micro fitment interior without the need to purchase extra interior components
Arai Signet Q Solid has the New FCS (Facial Contour Support) cheek pad design
Innovative and exclusive spring support adds just the right amount of pressure when needed while being worn
Meets or exceeds Snell and D.O.T. standards

ARAI SIGNET-Q RACER BLACK

Mon, 21 May 2012 03:13:22 +0000

Both the top vent set and side exhaust cowls are direct carryovers from the RX-Q
Brow vent ducting redirects to flow air across the temples
DDL-4 exhaust vent to the 10mm wider eye port (5mm on each side)
Long Oval Fit
SAI "MAX-Vision Brow Vent" shield
Clear Pin Lock Max-Vision Brow Vent face shield Included with the helmet
Elongated shell adds 5mm from front to back
Long-Oval shape helps prevent “Hot-Spot”
Multi-Density Single piece EPS liner
Removable, replaceable, washable interior
Dry-Cool Surface material for rapid displacement of heat and moisture away from your head and into the ventilation airflow for added comfort while riding and a quick dry between rides
5mm peel-away temple pads adds another level of customization, giving the helmet interior a little extra width when needed
Enhanced for customizable micro fitment interior without the need to purchase extra interior components
Arai Signet Q Racer graphic has the New FCS (Facial Contour Support) cheek pad design
Innovative and exclusive spring support adds just the right amount of pressure when needed while being worn
Meets or exceeds Snell and D.O.T. standards

ARAI CORSAIR V HASLAM WSBK

Mon, 21 May 2012 03:13:22 +0000

The Corsair is Arai's flagship model. An Arai helmet is not the product of compromise, of a "profit" point, or a board of directors. An Arai helmet is the product of obsession, an ongoing obsession to design and build the best helmets possible. This year Arai took the Corsair V Replica helmets to a new level. With several new features, you'll see why the world's best wear the Arai Corsair V Helmet.

ARAI CORSAIR V CRUTCHLOW

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V HAGA WSBK RAINBOW

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V HAGA POLAR BLACK

Mon, 21 May 2012 03:13:22 +0000

ARAI SIGNET-Q RACER RED

Mon, 21 May 2012 03:13:22 +0000

Both the top vent set and side exhaust cowls are direct carryovers from the RX-Q
Brow vent ducting redirects to flow air across the temples
DDL-4 exhaust vent to the 10mm wider eye port (5mm on each side)
Long Oval Fit
SAI "MAX-Vision Brow Vent" shield
Clear Pin Lock Max-Vision Brow Vent face shield Included with the helmet
Elongated shell adds 5mm from front to back
Long-Oval shape helps prevent “Hot-Spot”
Multi-Density Single piece EPS liner
Removable, replaceable, washable interior
Dry-Cool Surface material for rapid displacement of heat and moisture away from your head and into the ventilation airflow for added comfort while riding and a quick dry between rides
5mm peel-away temple pads adds another level of customization, giving the helmet interior a little extra width when needed
Enhanced for customizable micro fitment interior without the need to purchase extra interior components
Arai Signet Q Racer graphic has the New FCS (Facial Contour Support) cheek pad design
Innovative and exclusive spring support adds just the right amount of pressure when needed while being worn
Meets or exceeds Snell and D.O.T. standards

ARAI CORSAIR V DOOHAN

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V TAKAHASHI 3

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V RUSSELL

Mon, 21 May 2012 03:13:22 +0000

ARAI SIGNET-Q SUPERSTAR BLACK

Mon, 21 May 2012 03:13:22 +0000

Both the top vent set and side exhaust cowls are direct carryovers from the RX-Q
Brow vent ducting redirects to flow air across the temples
DDL-4 exhaust vent to the 10mm wider eye port (5mm on each side)
Long Oval Fit
SAI "MAX-Vision Brow Vent" shield
Clear Pin Lock Max-Vision Brow Vent face shield Included with the helmet
Elongated shell adds 5mm from front to back
Long-Oval shape helps prevent “Hot-Spot”
Multi-Density Single piece EPS liner
Removable, replaceable, washable interior
Dry-Cool Surface material for rapid displacement of heat and moisture away from your head and into the ventilation airflow for added comfort while riding and a quick dry between rides
5mm peel-away temple pads adds another level of customization, giving the helmet interior a little extra width when needed
Enhanced for customizable micro fitment interior without the need to purchase extra interior components
Arai Signet Q Superstar Graphic has the New FCS (Facial Contour Support) cheek pad design
Innovative and exclusive spring support adds just the right amount of pressure when needed while being worn
Meets or exceeds Snell M2010 and D.O.T. standards

ARAI CORSAIR V DANI-2 BLUE

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V NICKY-3

Mon, 21 May 2012 03:13:22 +0000

ARAI SIGNET-Q SUPERSTAR RED

Mon, 21 May 2012 03:13:22 +0000

Both the top vent set and side exhaust cowls are direct carryovers from the RX-Q
Brow vent ducting redirects to flow air across the temples
DDL-4 exhaust vent to the 10mm wider eye port (5mm on each side)
Long Oval Fit
SAI "MAX-Vision Brow Vent" shield
Clear Pin Lock Max-Vision Brow Vent face shield Included with the helmet
Elongated shell adds 5mm from front to back
Long-Oval shape helps prevent “Hot-Spot”
Multi-Density Single piece EPS liner
Removable, replaceable, washable interior
Dry-Cool Surface material for rapid displacement of heat and moisture away from your head and into the ventilation airflow for added comfort while riding and a quick dry between rides
5mm peel-away temple pads adds another level of customization, giving the helmet interior a little extra width when needed
Enhanced for customizable micro fitment interior without the need to purchase extra interior components
Arai Signet Q Superstar Graphic has the New FCS (Facial Contour Support) cheek pad design
Innovative and exclusive spring support adds just the right amount of pressure when needed while being worn
Meets or exceeds Snell M2010 and D.O.T. standards

ARAI CORSAIR V AOYAMA CORSA

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V AOYAMA 3

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V AOYAMA

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V EDWARDS BLACK

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V EDWARDS BLUE

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V EDWARDS RED

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V EDWARDS REPLICA

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V SPENCER LE

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V HARADA SILVER

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V REA

Mon, 21 May 2012 03:13:22 +0000

ARAI CORSAIR V SOLIDS

Mon, 21 May 2012 03:13:22 +0000

FOX 360 Rockstar Matte Pant Black

Mon, 21 May 2012 03:13:22 +0000

Fox 360 Rockstar Matte Pants. Inspired by one of the most talented racers in the pro ranks, the Ryan Dungey Rockstar Replica graphic combo is a manifestation of the young champion’s smooth, fluid riding style on the most technical gear platform available.
The 360 line sets the industry standard for purpose-built racewear. High-quality materials, anatomically functional features immaculate attention to detail characterize this marquee lineup, and our wide range of graphics and styles satisfy every creative craving imaginable.

Nomad Rockstar Pant Black

Mon, 21 May 2012 03:13:22 +0000

The Fox Nomad Rockstar Pant is a versatile ride pant at a great price. Key featuring include a casual ride fit, zip off legs, leather burn guard on the right leg and an innovative adjustable cuff.
DESIGN & FUNCTION
600 D Main Body material for superior durability
Large leather knee panels for maximum heat resistance
Adjustable cuff for a flawless fit around the boot
Sublimated graphics on Rockstar and Checked Out designs
Constructed in the perfect attack position for ready-to race performance

FOX 180 Chapter Pant Black

Mon, 21 May 2012 03:13:22 +0000

The HC/180 continues to set the standard for value, style and performance. The HC jersey features moisture wicking polyester fabric and sublimated graphics while the Fox 180 Chapter Pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Sturdy 600D polyester main body material for superior durability
Dynamic stretch characteristics in high-movement areas
Large leather knee panels resist abrasion and heat
All-new TPR logos and bold color blocking for extra style
Constructed in the perfect attack position for ready-to-race performance

FOX Womens Switch Pant White Green

Mon, 21 May 2012 03:13:22 +0000

Fox Women's Switch Pants. Sporting a female friendly-fit with dynamic technical features, the Women’s Switch series Jersey and pant utilizes a unique pant leg synch cuff complimented by high-functioning polyester jersey construction to gain unrivaled comfort for the casual women’s rider.
PANTS DESIGN & FUNCTION
Adjustable cuff for a flawless fit around the boot
Redesigned shorter inseam ensures a great fit

FOX Womens Switch Pant Black Pink

Mon, 21 May 2012 03:13:22 +0000

Fox Women's Switch Pants. Sporting a female friendly-fit with dynamic technical features, the Women’s Switch series Jersey and pant utilizes a unique pant leg synch cuff complimented by high-functioning polyester jersey construction to gain unrivaled comfort for the casual women’s rider.
PANTS DESIGN & FUNCTION
Adjustable cuff for a flawless fit around the boot
Redesigned shorter inseam ensures a great fit

FOX 180 Women Undertow Pant Black Pink

Mon, 21 May 2012 03:13:22 +0000

Providing unmatched performance in a women’s specific fit, the Fox Women’s 180 Undertow Pant boasts all-new graphics and durable polyester construction placed on an epically low-priced package.
PANTS DESIGN & FUNCTION
Specific womens fit
Sturdy 600D polyester main body material for superior durability
Large leather knee panels resist abrasion and heat
Dynamic stretch characteristics for a women’s specific fit

FOX 180 Women Undertow Pant Purple

Mon, 21 May 2012 03:13:22 +0000

Providing unmatched performance in a women’s specific fit, the Fox Women’s 180 Undertow Pant boasts all-new graphics and durable polyester construction placed on an epically low-priced package.
PANTS DESIGN & FUNCTION
Specific womens fit
Sturdy 600D polyester main body material for superior durability
Large leather knee panels resist abrasion and heat
Dynamic stretch characteristics for a women’s specific fit

Fox Nomad Pant Black

Mon, 21 May 2012 03:13:22 +0000

The Fox Nomad Pant is a versatile ride pant at a great price. Key featuring include a casual ride fit, zip off legs, leather burn guard on the right leg and an innovative adjustable cuff.
DESIGN & FUNCTION
600 D Main Body material for superior durability
Large leather knee panels for maximum heat resistance
Adjustable cuff for a flawless fit around the boot
Sublimated graphics on Rockstar and Checked Out designs
Constructed in the perfect attack position for ready-to race performance

FOX 180 Rockstar Pant Red Yellow

Mon, 21 May 2012 03:13:22 +0000

Fox 180 Rockstar Pants. Meet the HC/ 180 Rockstar gear, a head-on collision of function and style that features all the performance of our 180 line in a bold, new Rockstar graphic scheme.

FOX 180 Rockstar Pant Black Yellow

Mon, 21 May 2012 03:13:22 +0000

Fox 180 Rockstar Pants. Meet the HC/ 180 Rockstar gear, a head-on collision of function and style that features all the performance of our 180 line in a bold, new Rockstar graphic scheme.

FOX 180 Vented Undertow Pant Black

Mon, 21 May 2012 03:13:22 +0000

Fox 180 Vented Undertow Pants. Full mesh front and rear construction characterizes the lighter-than-air 180 Vented pant, while the HC jersey benefits from race-proven mesh venting and high-dollar comfort at an incredibly low price.
DESIGN & FUNCTION
Lightweight mesh construction promotes incredible airflow
Dynamic stretch characteristics in high-movement areas
Large leather knee panels resist abrasion and heat
All-new TPR logos and bold color blocking for extra style
Constructed in the perfect attack position for ready-to-race performance

FOX 180 Vented Pant Black

Mon, 21 May 2012 03:13:22 +0000

Fox 180 Vented Pants. Full mesh front and rear construction characterizes the lighter-than-air 180 Vented pant, while the HC jersey benefits from race-proven mesh venting and high-dollar comfort at an incredibly low price.
Lightweight mesh construction promotes incredible airflow
Dynamic stretch characteristics in high-movement areas
Large leather knee panels resist abrasion and heat
All-new TPR logos and bold color blocking for extra style
Constructed in the perfect attack position for ready-to-race performance

FOX 180 Race Pant Red

Mon, 21 May 2012 03:13:22 +0000

The HC/180 continues to set the standard for value, style and performance. The HC jersey features moisture wicking polyester fabric and sublimated graphics while the Fox 180 Race Pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Sturdy 600D polyester main body material for superior durability
Dynamic stretch characteristics in high-movement areas
Large leather knee panels resist abrasion and heat
All-new TPR logos and bold color blocking for extra style
Constructed in the perfect attack position for ready-to-race performance

FOX 180 Race Pant Blue

Mon, 21 May 2012 03:13:22 +0000

The HC/180 continues to set the standard for value, style and performance. The HC jersey features moisture wicking polyester fabric and sublimated graphics while the Fox 180 Race Pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Sturdy 600D polyester main body material for superior durability
Dynamic stretch characteristics in high-movement areas
Large leather knee panels resist abrasion and heat
All-new TPR logos and bold color blocking for extra style
Constructed in the perfect attack position for ready-to-race performance

FOX 180 Race Pant Black

Mon, 21 May 2012 03:13:22 +0000

The HC/180 continues to set the standard for value, style and performance. The HC jersey features moisture wicking polyester fabric and sublimated graphics while the Fox 180 Race Pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Sturdy 600D polyester main body material for superior durability
Dynamic stretch characteristics in high-movement areas
Large leather knee panels resist abrasion and heat
All-new TPR logos and bold color blocking for extra style
Constructed in the perfect attack position for ready-to-race performance

FOX 180 Undertow Pant Orange

Mon, 21 May 2012 03:13:22 +0000

Fox 180 Undertow Pants. The HC/180 continues to set the standard for value, style and performance. The HC jersey features moisture wicking polyester fabric and sublimated graphics while the 180 pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Sturdy 600D polyester main body material for superior durability
Dynamic stretch characteristics in high-movement areas
Large leather knee panels resist abrasion and heat
All-new TPR logos and bold color blocking for extra style
Constructed in the perfect attack position for ready-to-race performance

FOX 180 Undertow Pant Green Blue

Mon, 21 May 2012 03:13:22 +0000

Fox 180 Undertow Pants. The HC/180 continues to set the standard for value, style and performance. The HC jersey features moisture wicking polyester fabric and sublimated graphics while the 180 pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Sturdy 600D polyester main body material for superior durability
Dynamic stretch characteristics in high-movement areas
Large leather knee panels resist abrasion and heat
All-new TPR logos and bold color blocking for extra style
Constructed in the perfect attack position for ready-to-race performance

FOX 180 Undertow Pant Black Green

Mon, 21 May 2012 03:13:22 +0000

Fox 180 Undertow Pants. The HC/180 continues to set the standard for value, style and performance. The HC jersey features moisture wicking polyester fabric and sublimated graphics while the 180 pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Sturdy 600D polyester main body material for superior durability
Dynamic stretch characteristics in high-movement areas
Large leather knee panels resist abrasion and heat
All-new TPR logos and bold color blocking for extra style
Constructed in the perfect attack position for ready-to-race performance

FOX 180 Undertow Pant Black White

Mon, 21 May 2012 03:13:22 +0000

Fox 180 Undertow Pants. The HC/180 continues to set the standard for value, style and performance. The HC jersey features moisture wicking polyester fabric and sublimated graphics while the 180 pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Sturdy 600D polyester main body material for superior durability
Dynamic stretch characteristics in high-movement areas
Large leather knee panels resist abrasion and heat
All-new TPR logos and bold color blocking for extra style
Constructed in the perfect attack position for ready-to-race performance

FOX 360 Vented Pant Black Yellow

Mon, 21 May 2012 03:13:22 +0000

Fox 360 Vented Pants. The Vented 360 jersey / pant combo is a featherweight alliance of breathability and performance designed for the ultimate high-temp relief. Large hole vented construction and lightweight engineering make for a breath of fresh air exactly where you need it most.
Lightweight mesh construction promotes incredible airflow
Innovative double layer knee panels resist abrasion and heat while maximizing connectivity with the bike
Improved waist buckle system makes for easy operation with gloves on
New Quad-Stretch™ rear yoke and Active-Stretch™ knee panels utilize our high-tech stretch fabric to promote natural movement
Updated vented thigh logos and improved knee intake scoops increase airflow
Constructed in the perfect attack position for ready-to-race performance

FOX 360 Flight Pant White Black

Mon, 21 May 2012 03:13:22 +0000

Fox 360 Flight Pants are a blend speed and motion. Fast lines, clean logos and bright colors are keys to the Flight. Built on our new premium 360 pant chassis, Key updates include a new quad stretch rear yoke that utilizes a 2 way stretch second layer and a larger stretch panel at the knee for enhanced mobility on the bike.

DESIGN & FUNCTION

Enhanced 900D polyester main body material for superior durability

Innovative double layer knee panels resist abrasion and heat while maximizing connectivity with the bike

Improved waist buckle system makes for easy operation with gloves on

New Quad-Stretch™ rear yoke and Active-Stretch™ knee panels utilize our high-tech stretch fabric to promote natural movement

Vented thigh logos and improved knee intake scoops increase airflow

FOX 360 Flight Pant Red

Mon, 21 May 2012 03:13:22 +0000

DESIGN & FUNCTION

Enhanced 900D polyester main body material for superior durability

Innovative double layer knee panels resist abrasion and heat while maximizing connectivity with the bike

Improved waist buckle system makes for easy operation with gloves on

New Quad-Stretch™ rear yoke and Active-Stretch™ knee panels utilize our high-tech stretch fabric to promote natural movement

Vented thigh logos and improved knee intake scoops increase airflow

FOX 360 Flight Pant Yellow

Mon, 21 May 2012 03:13:22 +0000

DESIGN & FUNCTION

Enhanced 900D polyester main body material for superior durability

Innovative double layer knee panels resist abrasion and heat while maximizing connectivity with the bike

Improved waist buckle system makes for easy operation with gloves on

New Quad-Stretch™ rear yoke and Active-Stretch™ knee panels utilize our high-tech stretch fabric to promote natural movement

Vented thigh logos and improved knee intake scoops increase airflow

FOX 360 Flight Pant Orange

Mon, 21 May 2012 03:13:22 +0000

DESIGN & FUNCTION

Enhanced 900D polyester main body material for superior durability

Innovative double layer knee panels resist abrasion and heat while maximizing connectivity with the bike

Improved waist buckle system makes for easy operation with gloves on

New Quad-Stretch™ rear yoke and Active-Stretch™ knee panels utilize our high-tech stretch fabric to promote natural movement

Vented thigh logos and improved knee intake scoops increase airflow

FOX 360 Covert Pant White

Mon, 21 May 2012 03:13:22 +0000

Fox 360 Future Pants feature a dynamic asymmetrical graphic that looks fast standing still. Built on our new premium 360 pant chassis, Key updates include a new quad stretch rear yoke that utilizes a 2 way stretch second layer and a larger stretch panel at the knee for enhanced mobility on the bike.
DESIGN & FUNCTION
Enhanced 900D polyester main body material for superior durability
Innovative double layer knee panels resist abrasion and heat while maximizing connectivity with the bike
Improved waist buckle system makes for easy operation with gloves on
New Quad-Stretch™ rear yoke and Active-Stretch™ knee panels utilize our high tech stretch fabric to promote natural movement
Updated vented thigh logos and improved knee intake scoops increase airflow
Constructed in the perfect attack position for ready-to-race performance

FOX 360 Future Pant Red

Mon, 21 May 2012 03:13:22 +0000

Fox 360 Future Pants feature a dynamic asymmetrical graphic that looks fast standing still. Built on our new premium 360 pant chassis, Key updates include a new quad stretch rear yoke that utilizes a 2 way stretch second layer and a larger stretch panel at the knee for enhanced mobility on the bike.
DESIGN & FUNCTION
Enhanced 900D polyester main body material for superior durability
Innovative double layer knee panels resist abrasion and heat while maximizing connectivity with the bike
Improved waist buckle system makes for easy operation with gloves on
New Quad-Stretch™ rear yoke and Active-Stretch™ knee panels utilize our high tech stretch fabric to promote natural movement
Updated vented thigh logos and improved knee intake scoops increase airflow
Constructed in the perfect attack position for ready-to-race performance

FOX 360 Future Pant Green

Mon, 21 May 2012 03:13:22 +0000

Fox 360 Future Pants feature a dynamic asymmetrical graphic that looks fast standing still. Built on our new premium 360 pant chassis, Key updates include a new quad stretch rear yoke that utilizes a 2 way stretch second layer and a larger stretch panel at the knee for enhanced mobility on the bike.

DESIGN & FUNCTION

Enhanced 900D polyester main body material for superior durability

Innovative double layer knee panels resist abrasion and heat while maximizing connectivity with the bike

Improved waist buckle system makes for easy operation with gloves on

New Quad-Stretch™ rear yoke and Active-Stretch™ knee panels utilize our high tech stretch fabric to promote natural movement

Updated vented thigh logos and improved knee intake scoops increase airflow

FOX 360 Future Pant Blue

Mon, 21 May 2012 03:13:22 +0000

DESIGN & FUNCTION

Enhanced 900D polyester main body material for superior durability

Innovative double layer knee panels resist abrasion and heat while maximizing connectivity with the bike

Improved waist buckle system makes for easy operation with gloves on

New Quad-Stretch™ rear yoke and Active-Stretch™ knee panels utilize our high tech stretch fabric to promote natural movement

Updated vented thigh logos and improved knee intake scoops increase airflow

FOX 360 Enterprize Pant Pink

Mon, 21 May 2012 03:13:22 +0000

A bold and dynamic print with colors that are alive are the signature of Fox 360 Enterprize Pants. Built on our new premium 360 pant chassis, key updates include a new quad stretch rear yoke that utilizes a 2 way stretch second layer and a larger stretch panel at the knee for enhanced mobility on the bike.
DESIGN & FUNCTION
Enhanced 900D polyester main body material for superior durability
Innovative double layer knee panels resist abrasion and heat while maximizing connectivity with the bike
Improved waist buckle system makes for easy operation with gloves on
New Quad-Stretch™ rear yoke and Active-Stretch™ knee panels utilize our high tech stretch fabric to promote natural movement
Updated vented thigh logos and improved knee intake scoops increase airflow
Constructed in the perfect attack position for ready-to-race performance

FOX 360 Enterprize Pant Green/Yellow

Mon, 21 May 2012 03:13:22 +0000

A bold and dynamic print with colors that are alive are the signature of Fox 360 Enterprize Pants. Built on our new premium 360 pant chassis, key updates include a new quad stretch rear yoke that utilizes a 2 way stretch second layer and a larger stretch panel at the knee for enhanced mobility on the bike.

DESIGN & FUNCTION

Enhanced 900D polyester main body material for superior durability

Innovative double layer knee panels resist abrasion and heat while maximizing connectivity with the bike

Improved waist buckle system makes for easy operation with gloves on

New Quad-Stretch™ rear yoke and Active-Stretch™ knee panels utilize our high tech stretch fabric to promote natural movement

Updated vented thigh logos and improved knee intake scoops increase airflow

FOX Women's Switch Infinity Jersey White/Green

Mon, 21 May 2012 03:13:22 +0000

The Fox Women's Switch Infinity Jersey. Sporting a female friendly-fit with dynamic technical features, the Women’s Switch series Jersey and pant utilizes a unique pant leg synch cuff complimented by high-functioning polyester jersey construction to gain unrivaled comfort for the casual women’s rider.
JERSEY DESIGN & FUNCTION
Specific Women’s fit
Screen Printed Graphic
Self cuff and collar

FOX Women's Switch Infinity Jersey Black/Pink

Mon, 21 May 2012 03:13:22 +0000

The Fox Women's Switch Infinity Jersey. Sporting a female friendly-fit with dynamic technical features, the Women’s Switch series Jersey and pant utilizes a unique pant leg synch cuff complimented by high-functioning polyester jersey construction to gain unrivaled comfort for the casual women’s rider.
JERSEY DESIGN & FUNCTION
Specific Women’s fit
Screen Printed Graphic
Self cuff and collar

FOX Womens HC Undertow Jersey Purple

Mon, 21 May 2012 03:13:22 +0000

Providing unmatched performance in a women’s specific fit, the Fox Women’s HC Undertow Jersey boasts all-new graphics and durable polyester construction placed on an epically low-priced package.
JERSEY DESIGN & FUNCTION
Specific Women’s fit
Soft V-Neck rib knit neckband
Drop tail at back hem keeps jersey tucked in pants
Rib Knit Cuff

FOX Womens HC Undertow Jersey Black/Pink

Mon, 21 May 2012 03:13:22 +0000

Providing unmatched performance in a women’s specific fit, the Fox Women’s HC Undertow Jersey boasts all-new graphics and durable polyester construction placed on an epically low-priced package.
JERSEY DESIGN & FUNCTION
Specific Women’s fit
Soft V-Neck rib knit neckband
Drop tail at back hem keeps jersey tucked in pants
Rib Knit Cuff

FOX Nomad Victory Jersey White

Mon, 21 May 2012 03:13:22 +0000

Whether you’re in the pits or on the gas, our Fox Nomad Victory Ride Jersey is the ideal blend of comfortable moisture-wicking polyester in a casual, gear-up-and-forget-fit.
DESIGN & FUNCTION
100% Polyester moisture wicking main body fabric
Screen Printed Graphics
Casual fit

FOX Nomad Victory Jersey Black

Mon, 21 May 2012 03:13:22 +0000

Whether you’re in the pits or on the gas, our Fox Nomad Victory Ride Jersey is the ideal blend of comfortable moisture-wicking polyester in a casual, gear-up-and-forget-fit.
DESIGN & FUNCTION
100% Polyester moisture wicking main body fabric
Screen Printed Graphics
Casual fit

FOX Nomad Steel Faith Jersey Black

Mon, 21 May 2012 03:13:22 +0000

Whether you’re in the pits or on the gas, our Fox Nomad Victory Ride Jersey is the ideal blend of comfortable moisture-wicking polyester in a casual, gear-up-and-forget-fit.
DESIGN & FUNCTION
100% Polyester moisture wicking main body fabric
Screen Printed Graphics
Casual fit

FOX HC Rockstar Jersey Red/Yellow

Mon, 21 May 2012 03:13:22 +0000

The Fox HC Rockstar Jersey. Meet the HC/ 180 Rockstar gear, a head-on collision of function and style that features all the performance of our 180 line in a bold, new Rockstar graphic scheme.

FOX HC Rockstar Jersey Black/Yellow

Mon, 21 May 2012 03:13:22 +0000

The Fox HC Rockstar Jersey. Meet the HC/ 180 Rockstar gear, a head-on collision of function and style that features all the performance of our 180 line in a bold, new Rockstar graphic scheme.

FOX HC Vented Undertow Jersey Black

Mon, 21 May 2012 03:13:22 +0000

The Fox HC Vented Undertow Jersey. Full mesh front and rear construction characterizes the lighter-than-air 180 Vented pant, while the HC jersey benefits from race-proven mesh venting and high-dollar comfort at an incredibly low price.
DESIGN & FUNCTION
Lightweight mesh construction supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
V-Neck collar and knit-cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos
Race-proven contour moves naturally with the rider

FOX HC Vented Jersey Black

Mon, 21 May 2012 03:13:22 +0000

The Fox HC Vented Jersey. Full mesh front and rear construction characterizes the lighter-than-air 180 Vented pant, while the HC jersey benefits from race-proven mesh venting and high-dollar comfort at an incredibly low price.
DESIGN & FUNCTION
Lightweight mesh construction supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
V-Neck collar and knit-cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos
Race-proven contour moves naturally with the rider

FOX HC Race Jersey Red

Mon, 21 May 2012 03:13:22 +0000

The Fox HC/180 continues to set the standard for value, style and performance. The Fox HC Race Jersey features moisture wicking polyester fabric and sublimated graphics while the 180 pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Polyester construction supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
V-Neck collar and rib knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos
Race-proven contour moves naturally with the rider

FOX HC Race Jersey Blue

Mon, 21 May 2012 03:13:22 +0000

The Fox HC/180 continues to set the standard for value, style and performance. The Fox HC Race Jersey features moisture wicking polyester fabric and sublimated graphics while the 180 pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Polyester construction supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
V-Neck collar and rib knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos
Race-proven contour moves naturally with the rider

FOX HC Race Jersey Black

Mon, 21 May 2012 03:13:22 +0000

The Fox HC/180 continues to set the standard for value, style and performance. The Fox HC Race Jersey features moisture wicking polyester fabric and sublimated graphics while the 180 pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Polyester construction supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
V-Neck collar and rib knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos
Race-proven contour moves naturally with the rider

FOX HC Undertow Jersey Orange

Mon, 21 May 2012 03:13:22 +0000

The Fox HC Undertow Jersey. The HC/180 continues to set the standard for value, style and performance. The HC jersey features moisture wicking polyester fabric and sublimated graphics while the 180 pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Polyester construction supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
V-Neck collar and rib knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos
Race-proven contour moves naturally with the rider

FOX HC Undertow Jersey Black/Green

Mon, 21 May 2012 03:13:22 +0000

The Fox HC Undertow Jersey. The HC/180 continues to set the standard for value, style and performance. The HC jersey features moisture wicking polyester fabric and sublimated graphics while the 180 pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Polyester construction supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
V-Neck collar and rib knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos
Race-proven contour moves naturally with the rider

FOX HC Undertow Jersey Black

Mon, 21 May 2012 03:13:22 +0000

The Fox HC Undertow Jersey. The HC/180 continues to set the standard for value, style and performance. The HC jersey features moisture wicking polyester fabric and sublimated graphics while the 180 pant features durable 600D polyester fabric, sublimated graphics and leather knee panels. New styles include 4 colors of the new dynamic Undertow allover print, 3 options of the race graphic and the tough in your face Chapter.
DESIGN & FUNCTION
Polyester construction supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
V-Neck collar and rib knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos
Race-proven contour moves naturally with the rider

FOX 360 Vented Jersey Black/Yellow

Mon, 21 May 2012 03:13:22 +0000

Whether you’re in the pits or on the gas, our Fox Nomad Victory Ride Jersey is the ideal blend of comfortable moisture-wicking polyester in a casual, gear-up-and-forget-fit.
DESIGN & FUNCTION
100% Polyester moisture wicking main body fabric
Screen Printed Graphics
Casual fit

FOX 360 Flight Jersey Yellow

Mon, 21 May 2012 03:13:22 +0000

Clean meets speed with the Fox 360 Flight jersey. Fades blended with fast lines, clean logos and bright colors. Built on our premium 360 block, features include moisture wicking main body fabric, large mesh inset panel for enhanced airflow and articulated padded elbow for the perfect fit in the rider attack position.
DESIGN & FUNCTION
Polyester/mesh built supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
Articulated elbow pads provide extra wear protection
Athletic collar and mesh knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos

FOX 360 Flight Jersey White

Mon, 21 May 2012 03:13:23 +0000

Clean meets speed with the Fox 360 Flight jersey. Fades blended with fast lines, clean logos and bright colors. Built on our premium 360 block, features include moisture wicking main body fabric, large mesh inset panel for enhanced airflow and articulated padded elbow for the perfect fit in the rider attack position.
DESIGN & FUNCTION
Polyester/mesh built supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
Articulated elbow pads provide extra wear protection
Athletic collar and mesh knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos

FOX 360 Flight Jersey Red

Mon, 21 May 2012 03:13:23 +0000

Clean meets speed with the Fox 360 Flight jersey. Fades blended with fast lines, clean logos and bright colors. Built on our premium 360 block, features include moisture wicking main body fabric, large mesh inset panel for enhanced airflow and articulated padded elbow for the perfect fit in the rider attack position.
DESIGN & FUNCTION
Polyester/mesh built supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
Articulated elbow pads provide extra wear protection
Athletic collar and mesh knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos

FOX 360 Flight Jersey Orange

Mon, 21 May 2012 03:13:23 +0000

Clean meets speed with the Fox 360 Flight jersey. Fades blended with fast lines, clean logos and bright colors. Built on our premium 360 block, features include moisture wicking main body fabric, large mesh inset panel for enhanced airflow and articulated padded elbow for the perfect fit in the rider attack position.
DESIGN & FUNCTION
Polyester/mesh built supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
Articulated elbow pads provide extra wear protection
Athletic collar and mesh knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos

FOX 360 Covert Jersey White/Black

Mon, 21 May 2012 03:13:23 +0000

Clean meets speed with the Fox 360 Flight jersey. Fades blended with fast lines, clean logos and bright colors. Built on our premium 360 block, features include moisture wicking main body fabric, large mesh inset panel for enhanced airflow and articulated padded elbow for the perfect fit in the rider attack position.
DESIGN & FUNCTION
Polyester/mesh built supports enhanced airflow and movement
Clean, fade-free graphics resist the elements and wash easily
Articulated elbow pads provide extra wear protection
Athletic collar and mesh knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos

FOX 360 Future Jersey Green

Mon, 21 May 2012 03:13:23 +0000

The Fox 360 Future Jersey is a unique asymmetrical color split that looks fast standing still. Built on our premium 360 block, features include moisture wicking main body fabric, full mesh back panel for enhanced airflow and articulated padded elbow for the perfect fit in the rider attack position.
DESIGN & FUNCTION
Moisture wicking polyester main body fabric with mesh back panel
Padded elbows (Adult Only)
Bold sublimated graphics for fade free washing
Athletic cuff with stretch gusset for perfect fit at wrist
Athletic perforated V-Neck collar
Drop tail at back hem keeps jersey tucked in pants

FOX 360 Future Jersey Red

Mon, 21 May 2012 03:13:23 +0000

The Fox 360 Future Jersey is a unique asymmetrical color split that looks fast standing still. Built on our premium 360 block, features include moisture wicking main body fabric, full mesh back panel for enhanced airflow and articulated padded elbow for the perfect fit in the rider attack position.
DESIGN & FUNCTION
Moisture wicking polyester main body fabric with mesh back panel
Padded elbows (Adult Only)
Bold sublimated graphics for fade free washing
Athletic cuff with stretch gusset for perfect fit at wrist
Athletic perforated V-Neck collar
Drop tail at back hem keeps jersey tucked in pants

FOX 360 Future Jersey Blue

Mon, 21 May 2012 03:13:23 +0000

The Fox 360 Future Jersey is a unique asymmetrical color split that looks fast standing still. Built on our premium 360 block, features include moisture wicking main body fabric, full mesh back panel for enhanced airflow and articulated padded elbow for the perfect fit in the rider attack position.
DESIGN & FUNCTION
Moisture wicking polyester main body fabric with mesh back panel
Padded elbows (Adult Only)
Bold sublimated graphics for fade free washing
Athletic cuff with stretch gusset for perfect fit at wrist
Athletic perforated V-Neck collar
Drop tail at back hem keeps jersey tucked in pants

FOX 360 Enterprize Jersey Red

Mon, 21 May 2012 03:13:23 +0000

The Fox 360 Enterprize Jersey is a dynamic print with bold clean colors that feel alive. Built on our premium 360 block, features include moisture wicking main body fabric, full mesh back panel for enhanced airflow and articulated padded elbow for the perfect fit in the rider attack position.
DESIGN & FUNCTION
Polyester mesh construction supports enhanced airflow and movement
Sublimated, fade-free graphics resist the elements and wash easily
Articulated elbow pads
Athletic collar and mesh knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos
G-Mesh back panel for enhanced venting

FOX 360 Enterprize Jersey Green/Yellow

Mon, 21 May 2012 03:13:23 +0000

The Fox 360 Enterprize Jersey is a dynamic print with bold clean colors that feel alive. Built on our premium 360 block, features include moisture wicking main body fabric, full mesh back panel for enhanced airflow and articulated padded elbow for the perfect fit in the rider attack position.
DESIGN & FUNCTION
Polyester mesh construction supports enhanced airflow and movement
Sublimated, fade-free graphics resist the elements and wash easily
Articulated elbow pads
Athletic collar and mesh knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos
G-Mesh back panel for enhanced venting

POD K300 MX Knee Brace Pair

Mon, 21 May 2012 03:13:23 +0000

The Fox 360 Enterprize Jersey is a dynamic print with bold clean colors that feel alive. Built on our premium 360 block, features include moisture wicking main body fabric, full mesh back panel for enhanced airflow and articulated padded elbow for the perfect fit in the rider attack position.
DESIGN & FUNCTION
Polyester mesh construction supports enhanced airflow and movement
Sublimated, fade-free graphics resist the elements and wash easily
Articulated elbow pads
Athletic collar and mesh knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos
G-Mesh back panel for enhanced venting

POD K300 MX Knee Brace Left

Mon, 21 May 2012 03:13:23 +0000

Utilizing an injection molded glass-reinforced nylon frame construction the POD MX K300 offers the same superior support, comfort and function as the K700 at an affordable price.
IDEAL APPLICATIONS
Adult riders of all skill levels, beginner to professional
ACL and PCL instability
MCL and LCL instability
Rotary and Combined Instabilities (CI)

POD K300 MX Knee Brace Right

Mon, 21 May 2012 03:13:23 +0000

The Fox 360 Enterprize Jersey is a dynamic print with bold clean colors that feel alive. Built on our premium 360 block, features include moisture wicking main body fabric, full mesh back panel for enhanced airflow and articulated padded elbow for the perfect fit in the rider attack position.
DESIGN & FUNCTION
Polyester mesh construction supports enhanced airflow and movement
Sublimated, fade-free graphics resist the elements and wash easily
Articulated elbow pads
Athletic collar and mesh knit cuffs ensure an excellent fit
Back panel drop tail stays tucked in during long motos
G-Mesh back panel for enhanced venting

FOX V3 Speed Helmet Black/White

Mon, 21 May 2012 03:13:23 +0000

Fox V3 Speed Helmet
DESIGN & FUNCTION
Strong, lightweight, Kevlar® & fiberglass construction
Multi-channel internal EPS liner distributes air through helmet
Fully removable & washable Coolmax® comfort liner & cheek pads
Super-wide eye port optimizes periferal vision
Smart Venting system includes 10 intake ports & 4 exits
Rear vent design to maximize airflow
Adjustable intake vents open up & lock down
Meets Snell 2005 & DOT Certifications

FOX V3 Speed Helmet Red

Mon, 21 May 2012 03:13:23 +0000

Fox V3 Speed Helmet
DESIGN & FUNCTION
Strong, lightweight, Kevlar® & fiberglass construction
Multi-channel internal EPS liner distributes air through helmet
Fully removable & washable Coolmax® comfort liner & cheek pads
Super-wide eye port optimizes periferal vision
Smart Venting system includes 10 intake ports & 4 exits
Rear vent design to maximize airflow
Adjustable intake vents open up & lock down
Meets Snell 2005 & DOT Certifications

FOX V1 ROCKSTAR HELMET

Mon, 21 May 2012 03:13:23 +0000

The Fox V1 Rockstar Helmet brings the technology of the V1 line along with insane graphics from Rockstar.
DESIGN AND FUNCTION:
Injection molded polycarbonate shell design provides style and function
Vent channels in the shell pull out moisture and heat.
Integrated roost guard shields your face
Removable mouthpiece for easy cleaning
Meets Snell 2005 and DOT Certifications

FOX V1 Race Helmet Red

Mon, 21 May 2012 03:13:23 +0000

The drop kicking, attitude-driven Fox V1 Race Helmet graphic is ready for 2012 Motocross. Featuring stark contrasts of black and white, and aggressive colorways, the V1 Race is universally bad. And that’s never looked so good.
DESIGN & FUNCTION
Injection molded polycarbonate shelldesign provides style & function
Vent channels in the shell pull out moisture and heat
Integrated roost guard shields your face
Removable mouthpiece for easy cleaning
Meets Snell 2005 & DOT Certifications

FOX V1 Race Helmet Blue

Mon, 21 May 2012 03:13:23 +0000

The drop kicking, attitude-driven Fox V1 Race Helmet graphic is ready for 2012 Motocross. Featuring stark contrasts of black and white, and aggressive colorways, the V1 Race is universally bad. And that’s never looked so good.
DESIGN & FUNCTION
Injection molded polycarbonate shelldesign provides style & function
Vent channels in the shell pull out moisture and heat
Integrated roost guard shields your face
Removable mouthpiece for easy cleaning
Meets Snell 2005 & DOT Certifications

FOX V2 Pure Filth Helmet Blue/Black

Mon, 21 May 2012 03:13:23 +0000

The Fox V2 Pure Filth Helmet
DESIGN AND FUNCTION
Injection molded polycarbonate shell design provides style and function
Dual venting channels in the shell pull out moisture and heat
Aerocool comfort liner and cheek pads for superior fit and moisture control
Integrated roost guard shields your face
Removable mouthpiece for easy cleaning
Meets Snell 2005 and DOT Certifications

FOX V1 Chapter Helmet Black

Mon, 21 May 2012 03:13:23 +0000

The Fox V1 Chapter Helmet
DESIGN AND FUNCTION
Injection molded polycarbonate shell design provides style and function
Vent channels in the shell pull out moisture and heat.
Integrated roost guard shields your face
Removable mouthpiece for easy cleaning
Meets Snell 2005 and DOT Certifications

FOX V2 Vandal Helmet Black

Mon, 21 May 2012 03:13:23 +0000

The Fox V2 Vandal Helmet
DESIGN AND FUNCTION
Injection molded polycarbonate shell design provides style and function
Dual venting channels in the shell pull out moisture and heat
Aerocool comfort liner and cheek pads for superior fit and moisture control
Integrated roost guard shields your face
Removable mouthpiece for easy cleaning
Meets Snell 2005 and DOT Certifications

FOX V2 Race Helmet Green/Blue

Mon, 21 May 2012 03:13:23 +0000

All new for 2012, the Fox V2 Race Helmet features a dynamic graphic in a stealth black colorway and an electric green/blue colorway.

DESIGN & FUNCTION

Injection molded polycarbonate shelldesign provides style & function

Dual venting channels in the shell

ull out moisture and heat

Aerocool comfort liner & cheek pads

or superior fit & moisture control

Integrated roost guard shields your face

Removable mouthpiece for easy cleaning

FOX V1 Undertow Helmet Black/Pink

Mon, 21 May 2012 03:13:23 +0000

Destined for fame and glory, this Fox V1 Undertow Helmet can’t wait to win in the dynamic Undertow graphic. Offered exclusively on the V1 and complimenting the astounding quality of the matching 180/HC gear set, this helmet stands out as the best style and performance bang for your dollar.
DESIGN & FUNCTION
Injection molded polycarbonate shelldesign provides style & function
Vent channels in the shell pull out moisture and heat
Integrated roost guard shields your face
Removable mouthpiece for easy cleaning
Meets Snell 2005 & DOT Certifications

FOX V1 Undertow Helmet Green/Blue

Mon, 21 May 2012 03:13:23 +0000

Destined for fame and glory, this Fox V1 Undertow Helmet can’t wait to win in the dynamic Undertow graphic. Offered exclusively on the V1 and complimenting the astounding quality of the matching 180/HC gear set, this helmet stands out as the best style and performance bang for your dollar.
DESIGN & FUNCTION
Injection molded polycarbonate shelldesign provides style & function
Vent channels in the shell pull out moisture and heat
Integrated roost guard shields your face
Removable mouthpiece for easy cleaning
Meets Snell 2005 & DOT Certifications

FOX V3 Steel Faith Helmet Silver/Red

Mon, 21 May 2012 03:13:23 +0000

Featuring the same dynamic graphic, the new Fox V3 Steel Faith Helmet boasts a new silver/red color for 2012.
DESIGN & FUNCTION
Strong, lightweight, Kevlar® & fiberglass construction
Multi-channel internal EPS liner distributes air through helmet
Fully removable & washable Coolmax® comfort liner & cheek pads
Super-wide eye port optimizes periferal vision
Smart Venting system includes 10 intake ports & 4 exits
Rear vent design to maximize airflow
Adjustable intake vents open up & lock down
Meets Snell 2005 & DOT Certifications

FOX V1 Undertow Helmet Black/Green

Mon, 21 May 2012 03:13:23 +0000

Destined for fame and glory, this Fox V1 Undertow Helmet can’t wait to win in the dynamic Undertow graphic. Offered exclusively on the V1 and complimenting the astounding quality of the matching 180/HC gear set, this helmet stands out as the best style and performance bang for your dollar.
DESIGN & FUNCTION
Injection molded polycarbonate shelldesign provides style & function
Vent channels in the shell pull out moisture and heat
Integrated roost guard shields your face
Removable mouthpiece for easy cleaning
Meets Snell 2005 & DOT Certifications

FOX V2 Race Helmet Black

Mon, 21 May 2012 03:13:23 +0000

The drop kicking, attitude-driven Fox V1 Race Helmet graphic is ready for 2012 Motocross. Featuring stark contrasts of black and white, and aggressive colorways, the V1 Race is universally bad. And that’s never looked so good.
DESIGN & FUNCTION
Injection molded polycarbonate shelldesign provides style & function
Vent channels in the shell pull out moisture and heat
Integrated roost guard shields your face
Removable mouthpiece for easy cleaning
Meets Snell 2005 & DOT Certifications

FOX V3 RC Monster Pro Helmet White

Mon, 21 May 2012 03:13:23 +0000

The Fox RC Monster Pro Replica V3 is a high-tech treasure of maximum performance in the boldest of looks. Distinctly classic RC signature and Monster graphic.
DESIGN & FUNCTION
Strong, lightweight, Kevlar® & fiberglass construction
Multi-channel internal EPS liner distributes air through helmet
Fully removable & washable Coolmax® comfort liner & cheek pads
Super-wide eye port optimizes periferal vision
Smart Venting system includes 10 intake ports & 4 exits
Rear vent design to maximize airflow
Adjustable intake vents open up & lock down
Meets Snell 2005 & DOT Certifications

FOX V3 Covert Helmet White/Black

Mon, 21 May 2012 03:13:23 +0000

It’s All About Attitude. The in-your-face tradition of cutting edge graphics returns in the 2012 Covert series. Famously featured on the V3 Helmet in the latest visual treat, the Fox V3 Covert Helmet's print captures the grit and flash of the Covert 360 Racewear. Wear in conjunction with the 360 set for a seamless look or pair up a Covert lid with any gear for contrasting smack of attitude.

DESIGN & FUNCTION

Strong, lightweight, Kevlar® & fiberglass construction

Multi-channel internal EPS liner distributes air through helmet

Fully removable & washable Coolmax® comfort liner & cheek pads

Super-wide eye port optimizes periferal vision

Smart Venting system includes 10 intake ports & 4 exits

FOX V1 Race Helmet Black

Mon, 21 May 2012 03:13:23 +0000

The drop kicking, attitude-driven Fox V1 Race Helmet graphic is ready for 2012 Motocross. Featuring stark contrasts of black and white, and aggressive colorways, the V1 Race is universally bad. And that’s never looked so good.
DESIGN & FUNCTION
Injection molded polycarbonate shelldesign provides style & function
Vent channels in the shell pull out moisture and heat
Integrated roost guard shields your face
Removable mouthpiece for easy cleaning
Meets Snell 2005 & DOT Certifications

FOX V1 Race Helmet Red/Yellow

Mon, 21 May 2012 03:13:23 +0000

The drop kicking, attitude-driven Fox V1 Race Helmet graphic is ready for 2012 Motocross. Featuring stark contrasts of black and white, and aggressive colorways, the V1 Race is universally bad. And that’s never looked so good.
DESIGN & FUNCTION
Injection molded polycarbonate shelldesign provides style & function
Vent channels in the shell pull out moisture and heat
Integrated roost guard shields your face
Removable mouthpiece for easy cleaning
Meets Snell 2005 & DOT Certifications